MEASUREMENT PROGRAM TO DETERMINE STATIC ELECTRICITY CHARGING CURRENTS IN HELICOPTER MAIN ROTOR BLADES

1964 ◽  
Author(s):  
Samuel Baron ◽  
Edward Cholakian ◽  
Thomas M. Coonan
Keyword(s):  
Rotor Blades ◽  
Static Electricity ◽  
Main Rotor ◽  
Helicopter Main Rotor

scholarly journals MATHEMATICAL MODELS OF THE RADAR SIGNAL REFLECTED FROM A HELICOPTER MAIN ROTOR IN APPLICATION TO INVERSE SYNTHESIS OF ANTENNA APERTURE

2019 ◽  
Vol 22 (3) ◽  
pp. 74-87 ◽  
Author(s):  
Sergey R. Heister ◽  
Thai T. Nguyn
Keyword(s):  
Mathematical Models ◽  
Vertical Plane ◽  
Rotor Blades ◽  
Radar Signal ◽  
Main Rotor ◽  
Antenna Aperture ◽  
Radar Images ◽  
Aerial Vehicles ◽  
Propeller Blades ◽  
Helicopter Main Rotor

Introduction. The basis for solving the problem of aircraft recognition is the formation of radar portraits, reflecting the constructive features of aerial vehicles. Portraits, which are radar images of the propellers of aerial vehicles, have high informativeness. These images allow us to distinguish the number and relative position of the propeller blades, as well as the direction of its rotation. The basis for obtaining such images are mathematical models of reflected signals. Objective. The aim of this paper is to develop mathematical models of the radar signal reflected from the helicopter main rotor applied to inverse synthetic aperture radar (ISAR). Methods and materials. ISAR processing is used to produce a radar image of a propeller in a radar with a monochromatic probing signal. The propeller blades in the models are approximated by different geometric shapes. The models used to describe the reflection from the propellers of helicopters and fixed-wing aircraft have significant differences. In the process of moving each blade of the helicopter main rotor makes characteristic movements (flapping, dragging, feathering), as well as bends in a vertical plane. Such movements and bendings of the blades are influence the phase of the signal reflected from the main rotor. It is necessary to take the phase change of the reflected signal into account as accurately as possible when developing an ISAR algorithm for imaging the main rotor. Results. We found that in the centimeter wavelength range the mathematical model of the signal reflected from the helicopter main rotor as a system of blades is most accurately described by representing each blade with a set of isotropic reflectors located on the main rotor’s blade leading and trailing edges. Taking into account the flapping movements and curved shapes of the blades in the model allows you to get as close as possible to the features of the real signal. Conclusion. The developed model which takes into account the flapping movements and bends of the helicopter main rotor blades can be used to improve the ISAR algorithms providing the radar imaging of aerial vehicles.

scholarly journals АНАЛІЗ КОНСТРУКТИВНО-ТЕХНОЛОГІЧНИХ ОСОБЛИВОСТЕЙ ЛОПАТЕЙ НЕСУЧИХ ГВИНТІВ ВАЖКИХ ТРАНСПОРТНИХ ВЕРТОЛЬОТІВ

2021 ◽  
pp. 59-103
Author(s):  
А. Г. Гребеников ◽  
Ю. В. Дьяченко ◽  
В. В. Коллеров ◽  
В. Ю. Коцюба ◽  
И. В. Малков ◽  
...  
Keyword(s):  
Service Life ◽  
Rotor Blade ◽  
Parametric Modeling ◽  
Rotor Blades ◽  
Parametric Models ◽  
Space Distribution ◽  
Main Rotor ◽  
Mixed Design ◽  
Helicopter Main Rotor ◽  
Main Rotor Blade

The analysis of the design and technological features of the rotor blades of heavy transport helicopters is carried out. The main performance characteristics of heavy helicopters are presented. General requirements to helicopter main rotor blades design and specifications for their production are formulated. The design and force diagram of heavy helicopter main rotor blades is considered. The features of structural materials for the main rotor blades of heavy transport helicopters are marked. The main rotor blades differ in their design due to different approaches to materials, manufacturing and layout of blade elements. The main rotor blades of an all-metal design, for design and technological reasons, are divided into two groups: a frame structure with a tubular steel spar and an aluminum extruded spar. As a result of a number of design and technological measures the service life of the main rotor blade of helicopter Mi-6 was brought from 50 hours to 1500 hours. The principal peculiarity of the steel tubular spar of the main rotor blade of the Mi-26 helicopter is the absence of the shaft lug. The features of mixed design main rotor blades are presented. The method of parametric modeling of helicopter main rotor blades is presented. The application of the three-dimensional parametric models of structural elements in practice of designing and construction enables to perform numerical calculations of aerodynamic and strength characteristics both of separate aggregates, units and details and of the helicopter as a whole by means of the finite element method. The method of parametric modeling of the main rotor blade of the transport helicopter with the computer system CATIA V5 is a modification of the method of integrated designing of the elements of aviation constructions. Parametric master geometry of the main rotor blade is a linear surface, created by basic profiles of the blade. On the basis of parametric master geometry a space distribution model is created that determines the position of axial planes of the power set of the blade for further creation of the blade detail models. Technological flowchart of main rotor blade manufacturing is presented, manufacturing and surface hardening technology of steel tubular spar is considered. The technology of manufacturing and molding the nose part of the blade of the main rotor mixed design. The technological features of slipway assembly-gluing of the main rotor blade are considered, the content of off-slipway work is given.These materials can be useful in theoretical and experimental studies to extend the service life of the rotor blades of Mi-26 helicopters, which are currently in operation in Ukraine.

scholarly journals Some practical issues in the computational design of airfoils for the helicopter main rotor blades

2004 ◽  
Vol 31 (3-4) ◽  
pp. 281-315
Author(s):  
Ivan Kostic
Keyword(s):  
Computational Design ◽  
Rotor Blades ◽  
Helicopter Rotor ◽  
Design Stage ◽  
Main Rotor ◽  
Moment Coefficient ◽  
Plastic Composites ◽  
Zero Moment ◽  
The Moment ◽  
Helicopter Main Rotor

Very important requirement for the helicopter rotor airfoils is zero, or nearly zero moment coefficient about the aerodynamic center. Unlike the old technologies used for metal blades, modern production involving application of plastic composites has imposed the necessity of adding a flat tab extension to the blade trailing edge, thus changing the original airfoil shape. Using computer program TRANPRO, the author has developed and verified an algorithm for numerical analysis in this design stage, applied it on asymmetrical reflex camber airfoils, determined the influence of angular tab positioning on the moment coefficient value and redesigned some existing airfoils to include properly positioned tabs that satisfy very low moment coefficient requirement. .

scholarly journals Modelling of Helicopter Main Rotor Aerodynamic Loads in Manoeuvres

2019 ◽  
Vol 26 (4) ◽  
pp. 273-284
Author(s):  
Grzegorz Kowaleczko ◽  
Andrzej Leśniczak
Keyword(s):  
Mathematical Model ◽  
Aerodynamic Characteristics ◽  
Complex Model ◽  
Rotor Blades ◽  
Main Rotor ◽  
Aerodynamic Forces ◽  
Aerodynamic Loads ◽  
Helicopter Flight ◽  
Helicopter Main Rotor ◽  
The Mathematical Model

AbstractThe article discusses the method of modelling of the helicopter main rotor aerodynamic loads during steady state flight and manoeuvres. The ability to determine these loads was created by taking into account the motion of each blade relative to the hinges and was a result of the applied method of aerodynamic loads calculating. The first part of the work discusses the basic relationships that were used to build the mathematical model of helicopter flight. The focus was also on the method of calculating of the aerodynamic forces generated by the rotor blades. The results of simulations dedicated to the “jump to hover” manoeuvre were discussed, showing the possibilities of analysing aerodynamic loads occurring in unsteady flights. The main rotor is considered separately in an “autonomous” way and treated as a source of averaged forces and moments transferred to the hub. The motion of individual blades is neglected, and their aerodynamic characteristics are radically simplified. The motion of individual blades is neglected, and their aerodynamic characteristics are radically simplified. This can lead to significant errors when attempting to model dynamic helicopter manoeuvres. The more complex model of helicopter dynamics is discussed.

scholarly journals Computational analysis of helicopter main rotor blades in ground effect

2016 ◽  
Vol 66 (4) ◽  
pp. 52-58 ◽  
Author(s):  
Zorana Trivkovic ◽  
Jelena Svorcan ◽  
Marija Baltic ◽  
Dragan Komarov ◽  
Vasko Fotev
Keyword(s):  
Computational Analysis ◽  
Ground Effect ◽  
Rotor Blades ◽  
Main Rotor ◽  
Helicopter Main Rotor

scholarly journals CALCULATED RESEARCH OF INFLUENCE OF HELICOPTER MAIN ROTORS GEOMETRY ON THE EFFICIENCY IN HOVER MODE BASED ON THE NONLINEAR VORTEX MODEL

2018 ◽  
Vol 21 (6) ◽  
pp. 43-53
Author(s):  
Yurii M. Ignatkin ◽  
Pavel V. Makeev ◽  
Alexander I. Shomov
Keyword(s):  
Aerodynamic Characteristics ◽  
Operating Conditions ◽  
Rotor Blades ◽  
Main Rotor ◽  
Rotor Aerodynamics ◽  
Vortex Model ◽  
Coaxial Rotor ◽  
Efficiency Increase ◽  
Helicopter Main Rotor ◽  
Geometric Layout

The efficiency of the helicopter main rotor in the hover mode is very important, because this mode essentially determines the performance characteristics of the helicopter. A feature of the helicopter rotor aerodynamics is a significant inductive blade influence that highly defines its aerodynamic characteristics. The problem of the influence of the blade twist and spatial geometric layout of the main rotor on its aerodynamic characteristics in the hover mode for a fixed value of the rotor solidity has been considered in this article. As a criterion of efficiency of the rotor in the hover mode relative efficiency (FoM – Figure of Merit) is used. The results are obtained by numerical simulation based on the nonlinear vortex blade model of the rotor, developed at the Helicopter Design Chair of the MAI. The model allows taking into account a complicated spatial shape of the free vortex path of the rotor blades that determines their inductive interaction. As the example of a four-blade main rotor with rectangular blades in plan, the influence of the value of the blades twist on the efficiency in the hover mode is studied. For different values of the rotor thrust, the values and ranges of the blade twist angles are determined, providing the maximum positive effect of the efficiency increase in hovering. For a fixed value of the blade twist, the rotor solidity, and the same operating conditions, the effect of various schemes and configurations of rotor on its efficiency in hover mode is studied. A single rotor with a different number of blades (from 2 to 6), an X-shaped rotor, coaxial rotor and rotor with crossed blades type "synchropter" are considered. The values of the efficiency increase in hovering depending on the rotor layout in comparison with the two-blade rotor are obtained. The comparative analysis of inductive velocities and streamlines for the "synchropter" rotor scheme, coaxial rotor scheme and its equivalent single rotor scheme is presented. The obtained results can be useful at the stage of preliminary design of vertically taking-off aircraft when selecting the parameters of their main rotor system.

scholarly journals Investigations of the vortex ring state on a helicopter main rotor based on computational methodology using URANS solver

2019 ◽  
Vol 304 ◽  
pp. 02011
Author(s):  
Wienczyslaw Stalewski ◽  
Katarzyna Surmacz
Keyword(s):  
Vortex Ring ◽  
Equations Of Motion ◽  
Rotor Blades ◽  
Main Rotor ◽  
Simplified Approach ◽  
Helicopter Flight ◽  
Computational Methodology ◽  
Helicopter Main Rotor ◽  
Sudden Decrease ◽  
Vortex Ring State

Computational investigations of the Vortex Ring State (VRS) on a helicopter main rotor have been conducted. The VRS phenomenon is a condition of powered flight that occurs most frequently during the vertical or nearly vertical descent of a rotorcraft. The characteristic feature of the VRS is a torus-shaped vortex around a rotor. The occurrence of this extensive vortex structure is a dangerous phenomenon that usually causes sudden decrease of main-rotor thrust, finally leading to an increase of the rate of descent and vibration level, disturbances of a helicopter balance, deterioration of manoeuvrability and deficit of power. The investigations presented in the paper, have been conducted based on computational methodology developed and implemented by the Authors. The methodology is based on a coupling of several methods of Computational Fluid Dynamics and Flight Dynamic. The approach consists of calculation of unsteady aerodynamic forces acting on the flying rotorcraft by simultaneous solution of the URANS equations, the equations of motion of the helicopter as well as the equations describing fluid-structure-interaction phenomena. Flow effects caused by rotating rotor blades, are modelled using a simplified approach based on the Virtual Blade Model. Using the described methodology, a series of helicopter flight simulations, in a vicinity of the VRS boundaries, have been conducted. Selected results of these simulations have been discussed in the paper.

APPLICATION OF NEW TECHNOLOGIES IN THE PRODUCTION OF HELICOPTER MAIN ROTOR BLADES

2021 ◽  
pp. 90-102
Author(s):  
A.A. Barannikov ◽  
◽  
M.V. Postnova ◽  
E.V. Krasheninnikova ◽  
A.N. Vasyukov ◽  
...  
Keyword(s):  
Bond Strength ◽  
Atmospheric Pressure ◽  
New Technologies ◽  
Atmospheric Pressure Plasma ◽  
Surface Preparation ◽  
Adhesive Bond ◽  
Additional Research ◽  
Rotor Blades ◽  
Main Rotor ◽  
Helicopter Main Rotor

The paper considers the use of atmospheric pressure plasma (APP) treatment as a method for surface preparation of fiberglass of the VPS-53K brand in the manufacture of the main rotor blades of a helicopter of the «Mi» family. It was found that APP treatment increases the strength of the «spar–sheathing» adhesive bond (fiberglass grade VPS-53K), and also that there is a decrease in the bond strength in the presence of a temporary gap (one month) between the processing of the APP sheathing and the gluing operation, which requires additional research.

Sign in / Sign up

Export Citation Format

Share Document