Fly ash and bottom ash obtained from coal-fired electric power generating stations can be used as alternatives to natural materials for the construction of structural fills. The engineering properties of coal ash pertinent to its use in structural fills are discussed. Four case studies of coal ash structural fills are presented. The performance of these fills was monitored during and after construction. These cases demonstrate that the physical behavior of fly ash is similar to that of silt and that it can be handled with similar methods. Groundwater monitoring data from existing fly ash fills are presented to show the impact that ash leachate migrating into the groundwater regime has on water quality. Results of long-term corrosion studies are presented to show that metals buried in ash, used in such structures as culverts, cable ducts, guard rails and streetlights, are not adversely affected. Ash leachate was found not to be detrimental to good-quality concrete structures. Key words: fly ash, fill, compaction, leachate, corrosion, concrete.
Long-Term Groundwater Monitoring Results at Large, Sudden Denatured Ethanol Releases