Abstract
Wind turbines usually operate in harsh environments and in working conditions of variable speed, which easily causes their key components such as gearboxes to fail. The gearbox vibration signal of a wind turbine has nonstationary characteristics, and the existing Time-Frequency (TF) Analysis (TFA) methods have some problems such as insufficient concentration of TF energy. In order to obtain a more apparent and more congregated Time-Frequency Representation (TFR), this paper proposes a new TFA method, namely Adaptive Multiple Second-order Synchrosqueezing Wavelet Transform (AMWSST2). Firstly, a short-time window is innovatively introduced on the foundation of classical Continuous Wavelet Transform (CWT), and the window width is adaptively optimized by using the center frequency and scale factor. After that, a smoothing process is carried out between different segments to eliminate the discontinuity and thus Adaptive Wavelet Transform (AWT) is generated. Then, on the basis of the theoretical framework of Synchrosqueezing Transform (SST) and accurate Instantaneous Frequency (IF) estimation by the utilization of second-order local demodulation operator, Adaptive Second-order Synchrosqueezing Wavelet Transform (AWSST2) is formed. Considering that the quality of actual time-frequency analysis is greatly disturbed by noise components, through performing multiple Synchrosqueezing operations, the congregation of TFR energy is further improved, and finally, the AMWSST2 algorithm studied in this paper is proposed. Since Synchrosqueezing operations are performed only in the frequency direction, this method AMWSST2 allows the signal to be perfectly reconstructed. For the verification of its effectiveness, this paper applies it to the processing of the vibration signal of the gearbox of a 750 kW wind turbine.
A single‐shot autocorrelator for the ultraviolet with a variable time window
