scholarly journals Color, Ethylene Production, Respiration, and Compositional Changes in Broccoli Dipped in Hot Water

1997 ◽  
Vol 122 (1) ◽  
pp. 112-116 ◽  
Author(s):  
M.S. Tian ◽  
Talebul Islam ◽  
D.G. Stevenson ◽  
D.E. Irving

Color, ethylene production and respiration of broccoli (Brassica oleracea L. var. italica) dipped in hot water (45 °C, 10 minutes; 47 °C, 7.5 minutes; and 20 °C, 10 minutes as control) were measured. Hot-water treatment (HWT) delayed yellowing. Compared to the control, ethylene production and respiration in broccoli dipped at 45 °C decreased but recovered, and rates of both were enhanced after 24 and 48 hours, respectively, at 20 °C in darkness. There was no recovery of ethylene production or respiration in broccoli dipped at 47 °C. Following HWT of 47 °C for 7.5 minutes, respiration, starch, sucrose, and soluble protein content of florets and stems decreased dramatically during the first 10 to 24 hours after harvest. At the same time, fructose contents in florets and stems increased. Glucose increased in the florets but decreased within 24 hours in stems. Thereafter, glucose and fructose in florets and stems decreased. Sucrose content in florets and stems increased dramatically within a short period of treatment (<10 hours) and then declined. Protein in HWT florets and stems decreased during the first 24 hours and then increased until 72 hours. Ammonia content was lower in HWT broccoli during the first 24 hours and then increased above the level in the controls.

HortScience ◽  
2006 ◽  
Vol 41 (3) ◽  
pp. 737-740 ◽  
Author(s):  
Zisheng Luo

Mei (Prunus mume `Daqinghe') fruit were immersed in 20 °C (control), 47 °C (HWT47), 50 °C (HWT50), or 53°C (HWT53) water for 3 min after harvest, then stored at 20 °C. Firmness, peel color, chlorophyll, chlorophyllase activity, soluble solids content (SSC), titratable acidity (TA), respiration, ethylene production, and pectinmethylesterase (PME) and polygalacturonase (PG) activity were monitored to determine the effects of hot water treatment in delaying fruit ripening. Control fruit displayed a typical climacteric pattern of respiration and ethylene production. Peak CO2 production and ethylene production were observed 6 days after harvest. Fruit softening was accompanied by decreases in hue angle, chlorophyll content, SSC, and TA and increases in chlorophyllase and PME and PG activity. Hot water treatment delayed the onset of the climacteric peaks of CO2 and ethylene production. The delays were associated with delays in fruit softening, consistent with lags in the rise of PME and PG activity; delays in yellowing and chlorophyll breakdown, consistent with lags in the rise of chlorophyllase activity; and delays in loss of SSC and TA. The shelf life of fruit increased by 6 days, or 60%, with HWT47, and by 8 days, or 80%, with HWT50 or HWT53.


HortScience ◽  
2006 ◽  
Vol 41 (4) ◽  
pp. 1051E-1052
Author(s):  
Arturo Martinez-Morales ◽  
Iran Alia-Tejacal ◽  
Maria-Teresa Colinas-Leon ◽  
Victor Lopez-Martinez ◽  
Cecilio Bautista

Sapote mamey (Pouteria sapota) fruit commercialization to different markets is limited due to the fact that it is a host of the fruit fly (A. serpentina), so there is a special interest in generating a quarantine treatment protocol. In the present study, fruits from Jalpa de Mendez, Tabasco, Mexico, were harvested at physiological maturity and divided in two groups: a) fruits treated with hot water (46.1 °C) for 1 h, and b) control fruits, with no hot water treatment. Fruits were then stored at 12 °C for 7, 14, 21, and 28 days. After storage, days to ripening as well as respiration rate, ethylene production, and weight loss were evaluated for 6 days. Pulp color (ligthness, hue angle, and chroma), fruit firmness, total soluble solids and sugars, and total phenols (at the end of storage and 6 days after) were also evaluated. Results show that fruits stored for 0 days ripened in 5.8 days, while fruits stored between 7 and 28 days took between 3.2 and 5.6 days to reach the ripe stage. Considering the storage periods, effective postharvest life was increased between 11 and 32 days. Respiration rate markedly increased in control fruits after 21 days of storage, but no chilling injury symptoms were observed. Hot water treatment did not affect ethylene production, sugar or phenol content, color, and fruit firmness. Total soluble solids and sugars increased as storage period increased and even more after storage, thus suggesting that storage temperature does not stop the ripening process. No significant changes were observed in the color components. Results suggest that the hot water inmersion treatment is an alternative to reach the quarantine protocol (not affecting quality) and when combined with refrigeration could be used to sent fruit to distant places.


2021 ◽  
Vol 27 ◽  
pp. 102284
Author(s):  
Jakub Pečenka ◽  
Zuzana Bytešníková ◽  
Tomáš Kiss ◽  
Eliška Peňázová ◽  
Miroslav Baránek ◽  
...  

MRS Advances ◽  
2021 ◽  
Author(s):  
Quinshell Smith ◽  
Kenneth Burnett ◽  
Nawzat Saadi ◽  
Khulud Alotaibi ◽  
Atikur Rahman ◽  
...  

Author(s):  
Mohammad Khairul Basher ◽  
S. M. Shah Riyadh ◽  
Md. Khalid Hossain ◽  
Mahmudul Hassan ◽  
Md. Abdur Rafiq Akand ◽  
...  

Zinc-oxide (ZnO) nanostructures including nanorods are currently considered as a pioneer research of interest world-wide due to their excellent application potentials in various applied fields especially for the improvement of energy harvesting photovoltaic solar cells (PSC). We report on the growth and morphological properties of zinc-oxide (ZnO) nanorods grown on the surface of plain zinc (non-etched and chemically etched) plates by using a simple, economical, and environment-friendly technique. We apply hot water treatment (HWT) technique to grow the ZnO nanorods and varies the process parameters, such as temperature and the process time duration. The morphological, and elemental analysis confirm the agglomeration of multiple ZnO nanorods with its proper stoichiometry. The obtained nanostructures for different temperatures with different time duration showed the variation in uniformity, density, thickness and nanonorods size. The ZnO nanorods produced on the etched zinc surface were found thicker and uniform as compared to those grown on the non-etched zinc surface. This chemically etched Zinc plates preparation can be an easy solution to grow ZnO nanorods with high density and uniformity suitable for PSC applications such as to enhance the energy conversion efficiency of the photovoltaic (PV) solar cells towards the future sustainable green earth.


Sign in / Sign up

Export Citation Format

Share Document