scholarly journals Influence of bone anisotropy on reliability assessment of mini-plate fixation system stabilization in symphysis mandibular fractures: Two studied cases under convalescence period

Author(s):  
G. Kharmanda ◽  
M-Y. Kharma ◽  
A. El-Hami
2018 ◽  
Vol 4 (2) ◽  
pp. 205511691879887 ◽  
Author(s):  
Peter Southerden ◽  
Duncan M Barnes

Case summary Two cats were presented with mandibular fractures following head trauma. Following a CT scan, both were diagnosed with fractures of the ramus. The CT scans were used to print three-dimensional (3D) models of the mandibular fractures, which were used to pre-contour stainless steel mini-plates. These were fixed to the models and the screw positions used to produce a stainless steel template. The template was used as a pattern during surgery to drill holes in the ramus so that the pre-contoured mini-plates could be fixed in the exact same position as they had been on the 3D model. The fractures healed in both cats achieving normal jaw function and occlusion. Relevance and novel information Conventional techniques used to treat caudal mandibular fractures in cats, such as maxillomandibular fixation and bignathic encircling and retaining device (BEARD), are associated with significant patient morbidity and postoperative complications. Internal rigid fixation is difficult because of small bone size, requirement for considerable plate contouring and difficulty in achieving accurate anatomical reduction of caudal mandibular fractures. These are the first reported cases of mini-plate fixation of caudal mandibular fractures in cats using 3D models, pre-contouring of bone plates and the use of a template to facilitate accurate plate positioning, which may provide an alternative technique suitable for fixing caudal mandibular fractures in cats.


Hand Surgery ◽  
2014 ◽  
Vol 19 (01) ◽  
pp. 139-144 ◽  
Author(s):  
Kazuo Ikeda ◽  
Naoki Osamura ◽  
Kaoru Tada

If fixation of an ulnodorsal fragment in an intra-articular fracture of the distal radius is not stable, it is sometimes caused by dorsal displacement after surgery. Hence, we recommend the volar plate fixation with an additional dorsal approach and fixation of irreducible ulnodorsal fragments using a low-profile dorsal mini plate. The details of the surgical procedure and indications are discussed in this article.


2021 ◽  
Vol Publish Ahead of Print ◽  
Author(s):  
Michelle Seu ◽  
Hossein E. Jazayeri ◽  
Joseph Lopez ◽  
Nima Khavanin ◽  
Isabel V. Lake ◽  
...  

2021 ◽  
Vol 23 (1) ◽  
pp. 27-32
Author(s):  
Islam Mubark ◽  
Mahmoud Nafady ◽  
Bahaa A. Motawea

Background. Intra-capsular fractures of the femoral neck in young patients are almost always treated with surgical fixation to preserve the native hip anatomy and biomechanics. Multiple Cannulated hip screws and the sliding hip screw have been the hallmark fixation devices for these injuries. The use of locking cannulated hip screws to a side plate was developed to mitigate the biological and mechanical downfalls of these devices. To report the outcome following the use of a locking plate fixation system in the management of intracapsular fractures of the femoral neck in young patients. Material and methods. A case series study of all the patients treated in our institution between 2014 and 2017. All eligible patients with hip intracapsular fractures aged between 18 and 65 were treated with a proximal locking hip plate system. The main reported outcomes were union rate, failure of fixation, and development of avascular necrosis of the femoral head. Results: Fifty-six patients (36 men and 20 women) at a mean age of 39.1 years (range 20-65 years) completed 24 months’ follow-up. Mean time to surgery was 16 hours. No intraoperative complications were reported. The mean time to union was 15.9 weeks (range 12-23). Three patients (5.3%, one Garden type III, and two type IV) did not achieve union at 6 months. Two patients had revision surgery with valgus osteotomy and the third patient required total hip replacement because of screw penetration. Five patients (8.9%) developed avascular necrosis of the femoral head (2 patients Garden type III, and 3 patients Garden VI). Only two patients required conversion to total hip replacement. Conclusions. 1. The results in this study showed lower rates of non-union, AVN and secondary operation as compared to published data on both SCH and DHS. 2. It also compares favorably with results reported for dy­namic locking screw systems. 3. The study had few li­mitations, including lack of comparative groups. Also, when considering fracture classification subgroups, the unstable fracture pattern had higher rates of non-union and AVN. 4. This calls for a further larger number of studies dedicated to these fracture categories to ascertain long-term outcome with this type of fixation.


2020 ◽  
Author(s):  
Chunlei Wang ◽  
Haisen Zhang ◽  
Longjie Li ◽  
Si Chen ◽  
Chang Liu

Abstract Background Posterior cruciate ligament (PCL) avulsion fractures are rare and difficult to treat. The present work aimed to examine the effect of an innovative arthroscopy method for the treatment of PCL tibial avulsion fractures using mini-plate reduction and fixation through two tibial tunnels and the posterior trans-septal portal.Methods Totally 19 patients (median age, 33 years; range, 23–43 years) with PCL tibial avulsion fractures who underwent treatment with an arthroscopic suture bridge method were retrospectively assessed. Knee function pre-operation and at last follow up was assessed via Lysholm and Tegner scores. A KT-2000 arthrometer was employed for determining knee stability, the range of motion (ROM), and side-to-side differences. Plain radiography and International Knee Documentation Committee (IKDC) exams were performed for patient evaluation.Results No patient was switched to conventional open surgery due to difficult intraoperative procedures. Mean post-surgical Lysholm and Tegner scores (P < 0.001) were significantly improved in comparison with presurgical values. KT-2000 examination revealed markedly reduced side-to-side differences at last follow-up than observed preoperatively (1.2 ± 0.6 VS. 9.3 ± 2.2; P < 0.001). Radiography at the final follow up revealed solid union at the fracture site in the totality of 19 cases.Conclusions This new arthroscopy mini-plate fixation and posterior trans-septal method for posterior cruciate ligament tibial avulsion fractures resulted in good clinico-radiological outcomes, with adequate stability and fracture site healing. It could be employed to repair avulsion fragments of various sizes.Level of evidence IV


2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Guo-Chun Zha ◽  
Jun-Ying Sun ◽  
Sheng-Jie Dong ◽  
Wen Zhang ◽  
Zong-Ping Luo

This study aims to assess the biomechanical properties of a novel fixation system (named AFRIF) and to compare it with other five different fixation techniques for quadrilateral plate fractures. This in vitro biomechanical experiment has shown that the multidirectional titanium fixation (MTF) and pelvic brim long screws fixation (PBSF) provided the strongest fixation for quadrilateral plate fracture; the better biomechanical performance of the AFRIF compared with the T-shaped plate fixation (TPF), L-shaped plate fixation (LPF), and H-shaped plate fixation (HPF); AFRIF gives reasonable stability of treatment for quadrilateral plate fracture and may offer a better solution for comminuted quadrilateral plate fractures or free floating medial wall fracture and be reliable in preventing protrusion of femoral head.


1985 ◽  
Vol 6 (1) ◽  
pp. 80
Author(s):  
Edward J. Cheal ◽  
Wilson C. Hayes ◽  
Augustus A. White ◽  
Stephan M. Perren

Author(s):  
A. Kiapour ◽  
J. O’Donnell ◽  
V. K. Goel ◽  
A. Biyani

Spinal fusion is the traditional surgical option to improve the clinical outcome of patients with advanced lumbar degenerative disease. Various techniques including posterolateral arthrodesis, interbody arthrodesis, and circumferential arthrodesis are being pursued as fusion strategies to eliminate segmental instability, which is a recognized cause of low back pain [1]. There are several drawbacks associated with pedicle-screw fixation constructs including failure of implant components and back-out of the screws [2,3].


Sign in / Sign up

Export Citation Format

Share Document