scholarly journals Effect Of Chemo-Mechanical Caries Removal On The Micro-Tensile Bond Strength Of Resin Composite Using Universal Adhesive To Caries Affected Dentine

2021 ◽  
Vol 67 (2) ◽  
pp. 1729-1741
Author(s):  
Hend Ahmed ◽  
Hossam Elhussiny
Keyword(s):  
Bond Strength ◽  
Resin Composite ◽  
Tensile Bond Strength ◽  
Universal Adhesive ◽  
Caries Removal

scholarly journals To Evaluate Shear Bond Strength of Resin Composite to Theracal Lc, Biodentine, and Resin–Modified Glass Ionomer Cement and Mode of Fracture: An In Vitro Study

2020 ◽  
Vol 8 (02) ◽  
pp. 49-54
Author(s):  
Salil Mehra ◽  
Ashu K. Gupta ◽  
Bhanu Pratap Singh ◽  
Mandeep Kaur ◽  
Ashwath Kumar
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
Bonding Agent ◽  
Glass Ionomer ◽  
Universal Adhesive ◽  
Resin Modified Glass Ionomer ◽  
Ionomer Cement

Abstract Introduction The aim of the current study was to evaluate shear bond strength of resin composite bonded to Theracal LC, Biodentine, and resin-modified glass ionomer cement (RMGIC) using universal adhesive and mode of fracture. Materials and Methods A total of 50 caries-free maxillary and mandibular molars extracted were taken; occlusal cavities were prepared, mounted in acrylic blocks, and divided into five groups based on the liner used. Group 1: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 12 minutes. Group 2: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 14 days. Group 3: RMGIC liner placed into the cavity and bonding agent and resin composite applied immediately. Group 4: RMGIC liner placed into the cavity and bonding agent and resin composite applied after 7 days. Group 5: Theracal LC liner placed into the cavity and bonding agent and resin composite applied immediately. Each sample was bonded to resin composite using universal adhesive. Shear bond strength analysis was performed at a cross-head speed of 0.1 mm/min. Statistical Analysis  Statistical analysis was performed with one-way analysis of variance and posthoc Bonferroni test using SPSS version 22.0. Results and Conclusion Biodentine liner when bonded immediately to resin composite showed minimum shear bond strength. RMGIC when bonded to resin composite after 7 days showed maximum shear bond strength. Mode of fracture was predominantly cohesive in groups having Biodentine and Theracal LC as liner.

scholarly journals A comparative study of the microtensile bond strength and microstructural differences between sclerotic and Normal dentine after surface pretreatment

2019 ◽  
Vol 19 (1) ◽  
Author(s):  
Jinhua Wang ◽  
Weijian Song ◽  
Lei Zhu ◽  
Xin Wei
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Sodium Hypochlorite ◽  
Resin Composite ◽  
The Other ◽  
Tensile Bond Strength ◽  
Strength Analysis ◽  
Class Iii ◽  
Surface Pretreatment ◽  
Dentine Surface

Abstract Background The resin bond strength of sclerotic dentine is significantly lower than that of the normal dentine, which paused a challenge for bonding procedures clinically. The aim of this study was to compare the effects of different surface pretreatments on the micro-tensile bond strength and microstructure between sclerotic dentine and normal dentine. Methods Eighty teeth that were collected, forty premolars with typical wedge-shaped defects visually graded as class III were assigned as the sclerotic dentine group (SD), the other forty normal premolars with artificial wedge-shaped defects were assigned as the normal dentine group (ND). Each group was randomly subdivided into eight subgroups according to the solution used: 35% phosphoric acid, 15% EDTA, 5% or 10% NaClO. Then the dentine surface was examined using a scanning electron microscope (SEM). The lesions were restored using self-etching adhesive and the subsequent resin composite. The teeth were sectioned into sticks for the micro-tensile bond strength analysis, and the data were analysed using the SPSS17.0 software package (α = 0.05). Results First, for the ND groups, after pretreatment using 35% phosphoric acid, and 35% phosphoric acid + 5% or 10% sodium hypochlorite, the bonding strengths of the normal dentine were higher than that of the other groups (P < 0.05). Second, for the SD groups, after pretreatment using 35% phosphoric acid, 15% EDTA, and 35% phosphoric acid + 5% or 10% sodium hypochlorite, the bonding strengths of the sclerotic dentine were higher than that of the other groups (P < 0.05). Third, the bond strengths of the sclerotic dentine were lower than that of the normal dentine without any pretreatment (P < 0.05). After pretreatment using 35% phosphoric acid + 5% or 10% sodium hypochlorite, the bonding strengths of the sclerotic dentine were higher than that of the normal dentine (P < 0.05). SEM observation showed that the appearances of dentine surface were changed after pretreatment using the above solutions, with the reduced smear layer, opened small groove and increased dentinal tubules. Conclusion Pretreatment of dentine using 35% phosphoric acid+ 5% or + 10% sodium hypochlorite changed the microstructure of the sclerotic dentine surface and subsequently increased the micro-tensile bond strength.

scholarly journals The finish line location of the cemented crown is an influencing factor for tensile bond strength, marginal adaption and nanoleakage?

2020 ◽  
Vol 23 (2) ◽  
Author(s):  
Enrico Angelo ◽  
Rodrigo Esteves Barros Lins ◽  
Luis Roberto Marcondes Martins
Keyword(s):  
Bond Strength ◽  
Epoxy Resin ◽  
Resin Composite ◽  
Influencing Factor ◽  
Resin Cement ◽  
Tensile Bond Strength ◽  
Adhesive Failure ◽  
Finish Line ◽  
Significance Level ◽  
Spearman Correlation Test

Objective: The aim of this study was to evaluate the influence of different crowns finishing line location on the crown tensile bond strength, marginal adaption and nanoleakage. Material and Methods: Sixty healthy third molars were collected. For tensile bond strength, a self-adhesive resin cement was used. For marginal adaption, epoxy resin models were prepared. Prior to tensile bond strength test, images for the epoxy resin models were measured under scanning electron microscopy (SEM). Nanoleakage was measured using same protocol. Failure mode was evaluated through SEM and classified: adhesive failure, cohesive in cement, cohesive in dentin, cohesive in resin composite, cohesive in enamel, and mixed. Statistical analysis was performed using Shapiro-Wilk and Kolmogorov Smirnov normality tests, two-way ANOVA, Bonferroni (posthoc) parametric test, with significance level of 5% (P < .05), Spearman correlation test. Results: tensile bond strength was not statistically different between the cemented groups with composite resin and ceramic. Cementation of ceramic was not statistically different between the groups (enamel, 3.28 Pa; dentin, 3.14 Pa; resin, 2.85 Pa). Marginal adaption was statistically different between resin and ceramic; finish line location varied between enamel and resin (175.91 μm vs. 433.58 μm). Nanoleakage rate was statistically different among all groups, except for resin: with resin (9.49%) and ceramic (9.35%). There was a predominance of adhesive failure in all groups. Conclusion: finish line location can be performed safely in enamel and dentin. Composite resinas substrate present an alternative, but still need to be more studied. Regarding the crown’s material, it is possible to perform a satisfatory restoration in both: resin and ceramic. With ceramics presenting better results. KEYWORDSResin composite; Ceramics; Tensile bond strengh; Marginal adaption; Nanoleakage.

scholarly journals Effect of tooth age on bond strength to dentin

2003 ◽  
Vol 11 (4) ◽  
pp. 342-347 ◽  
Author(s):  
Marcelo Giannini ◽  
Patrícia Chaves ◽  
Marcelo Tavares de Oliveira
Keyword(s):  
Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Age Groups ◽  
In Vitro Study ◽  
Adhesive System ◽  
Tensile Bond Strength ◽  
Significant Difference ◽  
Diamond Saw

This in vitro study evaluated the effect of tooth age on the tensile bond strength of Prime & Bond NT adhesive system to dentin. Human third molars from the five age groups were analyzed: A- 17 to 20yrs, B- 21 to 30yrs, C- 31 to 40yrs, D- 41 to 50yrs and E- 51 to 63yrs. The occlusal enamel was removed using a diamond saw under water cooling and the dentin surface was wet-ground with 600-grit SiC paper to obtain flat surfaces. The adhesive system was applied according to the manufacturer's instructions and a 6-mm high resin "crown" was built-up with resin composite. Teeth were stored for 24 hours in distilled water at 37ºC and prepared for micro-tensile testing. Each specimen was mounted in a testing jig attached to a universal testing machine and stressed in tension at a crosshead speed of 0.5mm/min until failure. The means of tensile bond strength were (MPa): A- 21.42 ± 7.52ª; B- 30.13 ± 10.19ª; C- 31.69 ± 11.78ª; D- 30.69 ± 8.47ª and E- 35.66 ± 9.54ª. No statistically significant difference was observed among the age groups (p > 0.05). The results suggested that the tensile bond strength of the adhesive system was not significantly affected by dentin aging.

scholarly journals Bond strength of universal adhesive applied to dry and wet dentin

2020 ◽  
Vol 19 ◽  
pp. e201662
Author(s):  
Maria Luísa de Alencar e Silva Leite ◽  
Caroline de Farias Charamba ◽  
Renally Bezerra Wanderley e Lima ◽  
Sônia Saeger Meireles ◽  
Rosângela Marques Duarte ◽  
...  
Keyword(s):  
Bond Strength ◽  
Storage Time ◽  
Resin Composite ◽  
Adhesive System ◽  
Microtensile Bond Strength ◽  
Universal Adhesive ◽  
Bonding Quality ◽  
Etch And Rinse ◽  
Significant Difference ◽  
One Year

Aim: This study evaluated the influence of dentin wettability on the immediate and extended microtensile bond strength (mTBS) of a universal adhesive system used in the etch-and-rinse strategy. Methods: Twenty human third molars were selected and divided into four groups according to the adhesive system and dentin wettability. The mTBS values of each group were registered 24 h and one year after adhesive system application and resin composite block build-up (n=30). Data were analyzed by the t-test (p<0.05). Results: When both adhesive systems were compared, there was no statistically significant difference when they were applied following wet bonding (p>0.05). However, the dry bonding reduced μTBS values of the Adper Single Bond 2 adhesive (p<0.05). Regarding storage time, both groups presented similar μTBS values at 24 h and one year (p>0.05). Conclusions: Therefore, the Scotchbond Universal Adhesive can be applied to dry or wet dentin without compromising the etch-and-rinse bonding quality and the durability of the restorations.

scholarly journals Effect of Different Adhesion Protocols on the Shear Bond Strength of Universal Adhesive Systems to Sound and Artificial Caries-Affected Dentin

2021 ◽  
Author(s):  
Omnia M. Sami ◽  
Essam A. Naguib ◽  
Rasha H. Afifi ◽  
Shaymaa M. Nagi
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Failure Modes ◽  
Resin Composite ◽  
Single Bond ◽  
Adhesive Systems ◽  
Universal Adhesive ◽  
Etch And Rinse ◽  
Significant Difference ◽  
Self Etch

Abstract Objective Bonding to different dentin substrates influences resin composite restoration outcomes. This study investigated the influence of different adhesion protocols on the shear bond strength of universal adhesive systems to sound and artificial caries-affected dentin (CAD). Materials and Methods Occlusal enamel of 80 premolars were wet grinded to obtain flat midcoronal dentin. Specimens were equally divided according to the substrate condition: sound and CAD by subjecting to pH-cycling for 14 days. Each dentin substrate was bonded with the adhesive systems used in this study: Single Bond universal adhesive or Prime&Bond universal (applied either in etch-and-rinse or self-etch adhesion protocol). Adhesive systems were utilized according to manufacturers’ instructions, then resin composite was built up. Specimens were tested for shear bond strength. The data were analyzed by three-way analysis of variance, and failure modes were determined using stereomicroscope. Results There was no statistically significant difference between the two tested adhesive systems on artificially created CAD with different adhesion protocols. On sound dentin, Single Bond universal, either in the etch-and-rinse or self-etch adhesion protocols, revealed higher statistically significant shear bond strength mean values compared with CAD. Conclusion Single Bond universal adhesive in an etch-and-rinse adhesion protocol improved only bonding to sound dentin, while no added positive effect for the etching step with Prime&Bond universal adhesive was found when bonded to both sound and CAD substrates. The influence of CAD on the performance of the universal adhesives was material-dependent.

Sign in / Sign up

Export Citation Format

Share Document