scholarly journals An integrated approach for urban water quality assessment

2011 ◽  
Vol 64 (7) ◽  
pp. 1519-1526 ◽  
Author(s):  
A. S. Beenen ◽  
J. G. Langeveld ◽  
H. J. Liefting ◽  
R. H. Aalderink ◽  
H. Velthorst

This paper introduces an integrated approach for the assessment of receiving water quality and the relative contribution of the urban drainage system to perceived receiving water quality problems. The approach combines mass balances with relatively simple receiving water impact models. The research project has learned that the urban drainage system is only one of the determining factors with respect to receiving urban water quality problems. The morphology of the receiving waters and the non-sewer sources of pollution, such as waterbirds, dogs, or inflow of external surface water might be equally important. This conclusion underlines the necessity to changes today's emission based approach and adopt an integral and immission based approach. The integrated approach is illustrated on a case study in Arnhem, where the receiving water quality remained unsatisfactory even after retrofitting a combined sewer system into a separated sewer system.

1997 ◽  
Vol 36 (5) ◽  
pp. 373-380 ◽  
Author(s):  
C. Fronteau ◽  
W. Bauwens ◽  
P.A. Vanrolleghem

All the parts of an urban drainage system, i.e. the sewer system, the wastewater treatment plant (WWTP) and the river, should be integrated into one single model to assess the performance of the overall system and for the development of design and control strategies assisting in its sustainable and cost effective management. Existing models for the individual components of the system have to be merged in order to develop the integrated tool. One of the problems arising from this methodology is the incompatibility of state variables, processes and parameters used in the different modelling approaches. Optimisation of an urban drainage system, and of the wastewater treatment process in particular, requires a good knowledge of the wastewater composition. As important transformations take place between the emission from the household and the arrival at the treatment facility, sewer models should include these transformations in the sewer system. At present, however, research is still needed in order to increase our knowledge of these in-sewer processes. A comparison of the state variables, processes and parameters has been carried out in both sewer models (SMs) and activated sludge models (ASMs). An ASM approach is used for the description of reactions in sewer models. However, a difference is found in the expression for organic material (expressed in terms of BOD) and heterotrophic biomass is absent as a state variable, resulting in differences in processes and parameters. Reconciliation of both the models seems worthwhile and a preliminary solution is suggested in this paper.


2009 ◽  
Vol 59 (6) ◽  
pp. 1137-1143 ◽  
Author(s):  
M. Möderl ◽  
D. Butler ◽  
W. Rauch

Typically, performance evaluation of new developed methodologies is based on one or more case studies. The investigation of multiple real world case studies is tedious and time consuming. Moreover extrapolating conclusions from individual investigations to a general basis is arguable and sometimes even wrong. In this article a stochastic approach is presented to evaluate new developed methodologies on a broader basis. For the approach the Matlab-tool “Case Study Generator” is developed which generates a variety of different virtual urban drainage systems automatically using boundary conditions e.g. length of urban drainage system, slope of catchment surface, etc. as input. The layout of the sewer system is based on an adapted Galton-Watson branching process. The sub catchments are allocated considering a digital terrain model. Sewer system components are designed according to standard values. In total, 10,000 different virtual case studies of urban drainage system are generated and simulated. Consequently, simulation results are evaluated using a performance indicator for surface flooding. Comparison between results of the virtual and two real world case studies indicates the promise of the method. The novelty of the approach is that it is possible to get more general conclusions in contrast to traditional evaluations with few case studies.


1993 ◽  
Vol 27 (5-6) ◽  
pp. 29-33 ◽  
Author(s):  
Lambertus Lijklema ◽  
John M. Tyson

For successful management of urban water quality it has become clear that sewers, treatment plants and receiving water must be considered, not in isolation but as (interacting) components of an integrated system.


2019 ◽  
Vol 14 (3) ◽  
pp. 625-632
Author(s):  
Juliana Tais Engelmann ◽  
Rejane Frozza ◽  
Adilson Ben da Costa ◽  
Rodrigo Augusto Klamt

Abstract The objective of this study was to develop a system capable of evaluating the quality of the water consumed by an urban population using fuzzy logic. The set of factors to be analyzed were total coliforms, fluoride, free residual chlorine, turbidity, and apparent color. The factors selected as indicators of water quality and the system rules were modeled using the INFUZZY tool with help from specialists in this area, using a Great, Good, Acceptable or Inappropriate quality classification. 47 water quality analyses were applied. The results showed that 57.44% of the samples had a water quality classified as Great, 2.12% as Good, 2.12% as Acceptable, and 38.29% as Inappropriate. For each sample, results were in agreement with the evaluated parameters.


2021 ◽  
Vol 13 (20) ◽  
pp. 4047
Author(s):  
Xiaolan Cai ◽  
Yunmei Li ◽  
Shun Bi ◽  
Shaohua Lei ◽  
Jie Xu ◽  
...  

With the acceleration of urbanization, increasing water pollution means that monitoring and evaluating urban water quality are of great importance. Although highly accurate, traditional evaluation methods are time consuming, laborious, and vastly insufficient in terms of the continuity of spatiotemporal coverage. In this study, a water quality assessment method based on remote sensing reflectance optical classification and the traditional grading principle is proposed. In this method, an optical water type (OWT) library was first constructed using the measured in situ remote sensing reflectance dataset based on fuzzy clustering technology. Then, comprehensive scoring rules were established by combining OWTs and 12 water quality parameters, and water quality was graded into different urban water quality levels (UWQLs) based on the scoring results. Using the proposed method, the relative water quality of urban waterbodies was qualitatively evaluated at the macro level based on images from the multispectral imager of Sentinel-2. In addition, there was a significant positive correlation between the UWQLs and the water quality index (WQI). These results indicate the potential of this method for quantitative assessment of urban water quality, providing a new way to evaluate water quality using remote sensing algorithms in the future.


2010 ◽  
Vol 62 (10) ◽  
pp. 2301-2312 ◽  
Author(s):  
Giorgio Mannina ◽  
Gaspare Viviani

Urban water quality management often requires use of numerical models allowing the evaluation of the cause–effect relationship between the input(s) (i.e. rainfall, pollutant concentrations on catchment surface and in sewer system) and the resulting water quality response. The conventional approach to the system (i.e. sewer system, wastewater treatment plant and receiving water body), considering each component separately, does not enable optimisation of the whole system. However, recent gains in understanding and modelling make it possible to represent the system as a whole and optimise its overall performance. Indeed, integrated urban drainage modelling is of growing interest for tools to cope with Water Framework Directive requirements. Two different approaches can be employed for modelling the whole urban drainage system: detailed and simplified. Each has its advantages and disadvantages. Specifically, detailed approaches can offer a higher level of reliability in the model results, but can be very time consuming from the computational point of view. Simplified approaches are faster but may lead to greater model uncertainty due to an over-simplification. To gain insight into the above problem, two different modelling approaches have been compared with respect to their uncertainty. The first urban drainage integrated model approach uses the Saint-Venant equations and the 1D advection-dispersion equations, for the quantity and for the quality aspects, respectively. The second model approach consists of the simplified reservoir model. The analysis used a parsimonious bespoke model developed in previous studies. For the uncertainty analysis, the Generalised Likelihood Uncertainty Estimation (GLUE) procedure was used. Model reliability was evaluated on the basis of capacity of globally limiting the uncertainty. Both models have a good capability to fit the experimental data, suggesting that all adopted approaches are equivalent both for quantity and quality. The detailed model approach is more robust and presents less uncertainty in terms of uncertainty bands. On the other hand, the simplified river water quality model approach shows higher uncertainty and may be unsuitable for receiving water body quality assessment.


Sign in / Sign up

Export Citation Format

Share Document