IronArc is a newly developed technology and an emerging future process for pig iron production. The long-term goal with this technology is to reduce the CO2 emissions and energy consumption compared to existing technologies. The production rate of this process is dependent on the stirring, which was investigated in the pilot plant process by measuring the mixing time in the slag bath. Moreover, slag investigations were done both based on light optical microscope studies as well as by Thermo-Calc calculations in order to determine the phases of the slag during operation. This was done because the viscosity (which is another important parameter) is dependent on the liquid and solid fractions of the slag. The overall results show that it was possible to determine the mixing time by means of the addition of a tracer (MnO2 powder) to the slag. The mixing time for the trials showed that the slag was homogenized after seconds. For two of the trials, homogenization had already been reached in the second sample after tracer addition, which means ≤8 s. The phase analysis from the slag indicated that the slag is in a liquid state during the operation of the process.
AUTOMATIC CURVE PLOTTING OF PILOT PLANT PROCESS DATA