scholarly journals A Study on Narrow-band THz (Terahertz) Source with Adjustable Center Frequency Based on Optical Rectification

2016 ◽  
Vol 10 (1) ◽  
pp. 172-179 ◽  
Author(s):  
Ling Zhou ◽  
Xiang-wen Li ◽  
Jiang-ming Kuang ◽  
Shuang Zhang ◽  
Yi-he Liu
Perception ◽  
10.1068/p3338 ◽  
2002 ◽  
Vol 31 (7) ◽  
pp. 855-873 ◽  
Author(s):  
Helen J Simon ◽  
Pierre L Divenyi ◽  
Al Lotze

The effects of varying interaural time delay (ITD) and interaural intensity difference (IID) were measured in normal-hearing sighted and congenitally blind subjects as a function of eleven frequencies and at sound pressure levels of 70 and 90 dB, and at a sensation level of 25 dB (sensation level refers to the pressure level of the sound above its threshold for the individual subject). Using an ‘acoustic’ pointing paradigm, the subject varied the IID of a 500 Hz narrow-band (100 Hz) noise (the ‘pointer’) to coincide with the apparent lateral position of a ‘target’ ITD stimulus. ITDs of 0, ±200, and ±400 μs were obtained through total waveform delays of narrow-band noise, including envelope and fine structure. For both groups, the results of this experiment confirm the traditional view of binaural hearing for like stimuli: non-zero ITDs produce little perceived lateral displacement away from 0 IID at frequencies above 1250 Hz. To the extent that greater magnitude of lateralization for a given ITD, presentation level, and center frequency can be equated with superior localization abilities, blind listeners appear at least comparable and even somewhat better than sighted subjects, especially when attending to signals in the periphery. The present findings suggest that blind listeners are fully able to utilize the cues for spatial hearing, and that vision is not a mandatory prerequisite for the calibration of human spatial hearing.


Electronics ◽  
2021 ◽  
Vol 10 (16) ◽  
pp. 1978
Author(s):  
Longfei Tan ◽  
Kaida Xu ◽  
Yiqun Liu ◽  
Yingjiang Guo ◽  
Jianlei Cui

A new type of spoof surface plasmon polaritons (SSPPs) developed from conventional substrate integrated waveguide (SIW) using ring slots and vias is proposed in this paper. The asymptotic frequency and lower cutoff frequency of the SSPP structure can be easily tuned by changing the width of SIW walls and radius of the ring slot, respectively. A trapezoidal microstrip line and a small ring slot are used for the efficient mode conversion to smoothly transit from microstrip line to the proposed SSPP structure. The presented SSPPs have a flat bandpass filtering response with adjustable center frequency and bandwidth. In order to better verify the transmission and cutoff characteristics, two bandpass filters using the proposed SSPPs with relative bandwidths of 61.7% and 76.4%, respectively, are fabricated and measured. Good agreement between the simulations and measurements verifies the proposed design idea.


2000 ◽  
Author(s):  
T. Meade ◽  
Y.-S. Lee ◽  
V. Perlin ◽  
H. Winful ◽  
T. B. Norris ◽  
...  

1997 ◽  
Vol 64 (5) ◽  
pp. 619-621 ◽  
Author(s):  
C. Messner ◽  
M. Sailer ◽  
H. Kostner ◽  
R.A. Höpfel

2021 ◽  
Author(s):  
Jagnyashini Debadarshini ◽  
Sudipta Saha

<div>Fine-grained frequencies have been used in several recent works to enhance network throughput as well as combat Cross Technology Interference (CTI) issues in licence free ISM bands. We observe that synchronous communication based strategies, due to the scope of inter-frequency capture-effect, are inherently more capable of supporting in-parallel communication over multiple channels even when the Center Frequency Distance (CFD) of the channels are very low (<5 MHz). In this work, we pursue an in-depth study of how fine-grained frequencies can be used in conjunction with synchronous communication to extract the maximum benefit from a very narrow band of available frequencies (e.g., 2- 5 MHz) for in-parallel intra-group communication. In this direction, we propose a simple and efficient group formation strategy to automatically define groups in a given WSN/IoT network to boost up in-parallel intra-group communication efficiency. Through extensive experimental evaluations in existing WSN/IoT testbeds, we show that in-parallel one-to-all dissemination in the groups formed through the proposed strategy can execute with upto 73% higher reliability while consuming upto 41% lower energy as compared to the same running among the groups formed through naive strategy with only 4 consecutive frequencies separated by 1 MHz and upto 20 groups.</div>


Sign in / Sign up

Export Citation Format

Share Document