scholarly journals AN EFFICIENT MONITORING SYSTEM IN HAZARDOUS ENVIRONMENT USING RASPBERRY PI CONTROLLER

2017 ◽  
Vol 4 (11) ◽  
pp. 163-170
Keyword(s):  
Monitoring System ◽  
Pi Controller ◽  
Raspberry Pi

scholarly journals Smart Warehouse Monitoring Using Iot

2019 ◽  
Vol 8 (6) ◽  
pp. 3597-3600
Keyword(s):  
Monitoring System ◽  
Cloud Storage ◽  
Food Product ◽  
Pi Controller ◽  
Raspberry Pi ◽  
Traditional Model ◽  
Atmospheric Conditions ◽  
Current Technology ◽  
Food Grains ◽  
Manual Labour

A warehouse is a mercantile architecture for entrepot of stuff. Warehouses are used by producers, dealers, traders, wholesalers, distributors, customs, etc. The use of a smart WMS is the cherry on top of all of your smart technology. This warehouse should be screened at regular intervals to reduce storage cost of food grains due to atmospheric conditions and are documented. With the enlargement of business and the continuous requirements of the food product multiplicity, oldstyle granary management prototype will not meet that, due to its heavy capacity and low proficiency. To mitigate the manual labour work and to make the work easier, a smart warehouse is implemented which is enabled with several sensors and technologies. This paper intends to develop an IoT based smart warehouse monitoring system. The network of sensors includes vibration, humidity, temperature, fire sensors. It is done with the help of current technology (IoT). Raspberry pi controller adopts IoT technology to convey the messages. Based on the sensor’s data the appropriate data is captured and manipulated based on the limit given in the software and send timely information to the concern department officials of Central warehouse corporation through SMS for moderation and corrective actions arising due to atmospheric conditions inside the warehouse. The system developed has great advantages compared with the traditional model in terms of cloud storage of the warehouse data.

PROTOTYPE ALAT PEMANTAU SALURAN AIR BAWAH TANAH DENGAN MENGGUNAKAN WEBCAM C170 BERBASIS RASPBERRY PI

2015 ◽  
Vol 1 (1) ◽  
pp. 37-45
Author(s):  
Irwansyah Irwansyah ◽  
Hendra Kusumah ◽  
Muhammad Syarif
Keyword(s):  
Real Time ◽  
Monitoring System ◽  
Public Awareness ◽  
Underground Water ◽  
Raspberry Pi ◽  
Laptop Computer ◽  
Web Browser ◽  
Disaster Monitoring ◽  
The Times ◽  
Human Desire

Along with the times, recently there have been found tool to facilitate human’s work. Electronics is one of technology to facilitate human’s work. One of human desire is being safe, so that people think to make a tool which can monitor the surrounding condition without being monitored with people’s own eyes. Public awareness of the underground water channels currently felt still very little so frequent floods. To avoid the flood disaster monitoring needs to be done to underground water channels.This tool is controlled via a web browser. for the components used in this monitoring system is the Raspberry Pi technology where the system can take pictures in real time with the help of Logitech C170 webcam camera. web browser and Raspberry Pi make everyone can control the devices around with using smartphone, laptop, computer and ipad. This research is expected to be able to help the users in knowing the blockage on water flow and monitored around in realtime.

scholarly journals Monitoring System for Tracking a PV Generator in an Experimental Smart Microgrid: An Open-Source Solution

2021 ◽  
Vol 13 (15) ◽  
pp. 8182
Author(s):  
José María Portalo ◽  
Isaías González ◽  
Antonio José Calderón
Keyword(s):  
Open Source ◽  
Monitoring System ◽  
Smart Grids ◽  
Raspberry Pi ◽  
Operator Interface ◽  
Open Source Hardware ◽  
Real Time Information ◽  
And Storage ◽  
Time Information ◽  
Pv Generator

Smart grids and smart microgrids (SMGs) require proper monitoring for their operation. To this end, measuring, data acquisition, and storage, as well as remote online visualization of real-time information, must be performed using suitable equipment. An experimental SMG is being deployed that combines photovoltaics and the energy carrier hydrogen through the interconnection of photovoltaic panels, electrolyser, fuel cell, and load around a voltage bus powered by a lithium battery. This paper presents a monitoring system based on open-source hardware and software for tracking the temperature of the photovoltaic generator in such an SMG. In fact, the increases in temperature in PV modules lead to a decrease in their efficiency, so this parameter needs to be measured in order to monitor and evaluate the operation. Specifically, the developed monitoring system consists of a network of digital temperature sensors connected to an Arduino microcontroller, which feeds the acquired data to a Raspberry Pi microcomputer. The latter is accessed by a cloud-enabled user/operator interface implemented in Grafana. The monitoring system is expounded and experimental results are reported to validate the proposal.

scholarly journals IoT based Paralyzed Patient Health and Body Movement Monitoring System

2021 ◽  
Vol 9 (VI) ◽  
pp. 4495-4500
Author(s):  
Hemanth Kumar. R
Keyword(s):  
Monitoring System ◽  
Spinal Cord Injuries ◽  
Body Movement ◽  
Developed Countries ◽  
Health Condition ◽  
The Body ◽  
Raspberry Pi ◽  
Normal Person ◽  
Patient Health ◽  
Paralyzed Patient

Healthcare systems are a very important part of the economy of any country and for the public health. The IoT-based monitoring system for patients with paralysis, which helps to promote the health condition of a patient with paralysis, in addition to the day-to-day life. India has suffered a stroke, the incidence is much higher than that of the more developed countries, it is home to around 2.1 million Indians suffered from the boom of the (lame) per year. If a patient is suffering from a paralysis attack in all or any part of the body can be turned off in order to move in, which means that their movement is restricted and they can barely communicate with anyone at all, because they can't talk like a normal person. Raccoons will find it difficult to understand what they are saying, and help them deal with their day-to-day needs, such as food, water, etc.). At present, work is in progress on the review of the motion parameters on the legs, arms, and head of the paralytics. This paper investigates the development of an integrated and portable prototype is a model of a system for the monitoring of the various movements of the body, spinal cord injuries, with the help of sensors. The tests were carried out by placing the sensors on the head, arm, and leg of the paralyzed patient the data received from these sensors are sent to the raspberry pi 3 model. In the Android app, you'll receive a verbal warning, and if the patient is in need of help via Bluetooth, which, in turn, is connected to the raspberry pi.

scholarly journals Sistem Keamanan Pintu dan Jendela Rumah Berbasih IoT

2020 ◽  
Vol 5 (2) ◽  
pp. 266
Author(s):  
Wahyuni Kurniasih ◽  
Abdul Rakhman ◽  
Irma Salamah
Keyword(s):  
Monitoring System ◽  
Smartphone Application ◽  
The State ◽  
Security System ◽  
Raspberry Pi ◽  
Security Monitoring ◽  
Home Security ◽  
Security Monitoring System ◽  
At Home

The house is the most valuable asset, therefore security at home is also very important. Therefore a home security system is created that combines a microcontroller with an Android smartphone application. The microcontroller used is the Raspberry Pi which is equipped with a camera as a home security monitoring system and various sensors as detectors such as magnetic, PIR sensors and solenoids as automatic door locks. So if the sensors that are installed detect something at home, then the homeowner will immediately get a notification sent by the database to the smartphone application, and the homeowner can monitor the state of the house right then through photos and videos recorded by cameras that have been installed at home.

Sign in / Sign up

Export Citation Format

Share Document