scholarly journals EXPERIMENTAL STUDY ON INFLUENCE OF BED MATERIAL ON FLOW VELOCITY DISTRIBUTION INSIDE RIGID VEGETATED AREA

Author(s):  
Atsuko MIZOGUCHI
2020 ◽  
Vol 140 ◽  
pp. 107124 ◽  
Author(s):  
Xing Li ◽  
Peiyao Qi ◽  
Sichao Tan ◽  
Dongyang Li ◽  
Yitung Chen ◽  
...  

2013 ◽  
Vol 438-439 ◽  
pp. 1098-1103
Author(s):  
Chun Zi Nan ◽  
Ji Ming Ma ◽  
Luo Zhao

To enhance the exhaust efficiency during ventilation, three types of air duct outlets were imported. According to the characteristics of velocity distribution simulated by numerical method, the flow field is divided into the mixing zone and the exhaust zone. The gradual contracted air duct outlet can enhance the mixing effect between fresh air and smoke. In the exhaust zone, however, the flow velocity on the upper section of the tunnel is weakened, which is unfavorable for smoke exhaust. Gradual expanded air duct outlet, on the contrary, may weaken the concentration effect of the airflow. The flow velocity on the upper section of the tunnel is increased in the exhaust zone, thus the flow field is more homogenized, which is in favor of smoke exhaust.


Author(s):  
Himanshu Tyagi ◽  
Rui Liu ◽  
David S.-K. Ting ◽  
Clifton R. Johnston

The study of vortex shedding from a sphere assumes an important role because of its relevance to numerous aerodynamic and hydrodynamic applications. Parameters such as coefficient of drag and static pressure distribution are largely influenced by vortex shedding, and it is found by past studies that the freestream turbulence can interact and alter the vortex formation and shedding drastically. Most of these studies, however, were conducted in the low Reynolds number regime and the vortex shedding results had been described only qualitatively. To better understand the aerodynamics of a sphere in turbulent flow, an experimental study was initiated in a low speed wind tunnel to quantify the vortex shedding characteristics. The Reynolds number of the flow, based on the diameter of the sphere (d), was set at 3.3 × 104, 5 × 104 and 6.6 × 104 by varying the mean flow velocity. The sphere was placed at 20D (= 7.5d) downstream from a perforated plate, where D = 37.5 mm is the size of the holes in the perforated plate, uniquely designed for generating near-isotropic turbulence. Hot-wire measurements were taken at 10D (= 3.75d), 20D (= 7.5d) and 30D (= 11.25d) downstream of the sphere in absence and presence of the perforated plate. The vortex shedding frequency was deduced from the instantaneous flow velocity data.


Sign in / Sign up

Export Citation Format

Share Document