scholarly journals Seismic Analysis of Reinforce Concrete Frames Building for Different Position of Shear Walls (Using Etabs Software)

2018 ◽  
Vol 7 (1) ◽  
pp. 426-436
Author(s):  
Mood Naresh
Keyword(s):  
Seismic Analysis ◽  
Shear Walls ◽  
Reinforce Concrete ◽  
Concrete Frames

A SIMPLIFIED ANALYTICAL PROCEDURE FOR SEISMIC ANALYSIS OF TIMBER LIGHT-FRAME SHEAR WALLS

2019 ◽  
Vol 3 (Special Issue on First SACEE'19) ◽  
pp. 173-180
Author(s):  
Giorgia Di Gangi ◽  
Giorgio Monti ◽  
Giuseppe Quaranta ◽  
Marco Vailati ◽  
Cristoforo Demartino
Keyword(s):  
Analytical Procedure ◽  
Seismic Analysis ◽  
Shear Walls ◽  
Element Model ◽  
Sensitivity Analyses ◽  
Width Ratio ◽  
Damping Factor ◽  
Equivalent Viscous Damping ◽  
Design Variables ◽  
Depth Analysis

The seismic performance of timber light-frame shear walls is investigated in this paper with a focus on energy dissipation and ductility ensured by sheathing-to-framing connections. An original parametric finite element model has been developed in order to perform sensitivity analyses. The model considers the design variables affecting the racking load-carrying capacity of the wall. These variables include aspect ratio (height-to-width ratio), fastener spacing, number of vertical studs and framing elements cross-section size. A failure criterion has been defined based on the observation of both the global behaviour of the wall and local behaviour of fasteners in order to identify the ultimate displacement of the wall. The equivalent viscous damping has been numerically assessed by estimating the damping factor which is in use in the capacity spectrum method. Finally, an in-depth analysis of the results obtained from the sensitivity analyses led to the development of a simplified analytical procedure which is able to predict the capacity curve of a timber light-frame shear wall.

scholarly journals Shear and Flexural Stiffnesses of Reinforced Concrete Shear Walls Subjected to Cyclic Loading

2014 ◽  
Vol 8 (1) ◽  
pp. 104-121 ◽  
Author(s):  
T. O. Tang ◽  
R. K.L. Su
Keyword(s):  
Seismic Analysis ◽  
Classical Mechanics ◽  
Shear Walls ◽  
Shear Stiffness ◽  
Eurocode 8 ◽  
Design Codes ◽  
Structural Walls ◽  
Load Distributions ◽  
Classical Models ◽  
Ductility Capacity

Seismic analyses of concrete structures under maximum-considered earthquakes require the use of reduced stiffness accounting for cracks and degraded materials. Structural walls, different to other flexural dominated components, are sensitive to both shear and flexural stiffness degradations. Adoption of the gross shear stiffness for walls in seismic analysis prevails particularly for the design codes in the US. Yet available experimental results indicate that this could overstate the shear stiffness by more than double, which would hamper the actual predictions of building periods and shear load distributions among columns and walls. In addition, the deformation capacity could be drastically understated if the stipulated constant ductility capacity is adopted. This paper reviews the available simplified shear and flexural models, which stem from classical mechanics, empirical formulations and/or parametric studies, suitable for structural walls at the state-of-the-art. Reviews on the recommended flexural and shear stiffnesses by prominent design codes such as ACI318-11, Eurocode 8 and CSA are included. A database comprised of walls subjected to reverse-cyclic loads is formed to evaluate the performance of each model. It is found that there exist classical models that could outweigh overconservative codified values with comparable simplicity for practical uses.

Nonlinear modelling and seismic behaviour of precast concrete structures with steel shear walls

2016 ◽  
Vol 49 (4) ◽  
pp. 293-304
Author(s):  
Farhad Behnamfar ◽  
Rafeek Artoonian ◽  
Mehdi Ghandil
Keyword(s):  
Precast Concrete ◽  
Shear Walls ◽  
Structural System ◽  
Concrete Frames ◽  
Seismic Behaviour ◽  
Fem Model ◽  
Shell Elements ◽  
Connection Type ◽  
Nonlinear Static ◽  
Good Agreement

A new structural system consisting of precast concrete frames and steel shear walls (SSW's) is introduced and studied numerically in this paper. Two different models, first using ''exact'' FEM and second using approximate equivalent strip model (ESM), are utilized for analysis of such a system with nonlinear static (pushover) procedure. In the FEM model use is made of shell elements while the ESM benefits from simple links that replace the wall panels in the model and are oriented such that they work in tension. Because of good agreement observed between the results of the models in smaller structures, for taller buildings only the ESM approach is followed where computationally applying the FEM approach is impractical. The lateral behaviour of the systems under consideration is investigated with regard to parameters such as number of stories and beam-column connection type. As a result, the ductility, overstrength and response modification factors are calculated for this new structural system as quantities required for their practical design.

Seismic Analysis of Confined Masonry Shear Walls Using the Wide Column Model

2016 ◽  
Vol 857 ◽  
pp. 212-218
Author(s):  
Kiran Rangwani ◽  
Svetlana Brzev
Keyword(s):  
Reinforced Concrete ◽  
Latin American ◽  
Seismic Analysis ◽  
Shear Walls ◽  
Computational Effort ◽  
Wall Structure ◽  
Confined Masonry ◽  
Column Model ◽  
Wall Stiffness ◽  
Lateral Displacements

Confined Masonry (CM) structural system consists of masonry walls enclosed by reinforced concrete (RC) confining elements (tie-columns and tie-beams) and is usually supported by reinforced concrete floors and roof. This technology has been widely used for construction of low-and medium-rise buildings in Latin America, Europe, South Asia, and Middle East, and it has a proven record of good performance in damaging earthquakes. CM construction is not currently practiced in India and is not addressed by Indian design codes. Seismic analysis of CM wall panels can be performed using Wide Column Model (WCM), also known as Equivalent Frame Model. WCM is a macro model where a wall structure and the supporting floors and roof are idealized as a bare frame. CM walls can be modelled as wide columns with transformed section properties accounting for composite action of masonry and RC tie-columns. Beams in these bare frames have rigid segments simulating the effect of wall stiffness, and flexible segments that simulate the effect of floor and roof slabs. WCM has been recognized as a viable model for seismic analysis of CM buildings in Latin American countries, however this model is not well known in India. The results presented in this paper are based on linear elastic analyses of typical multi-storey CM solid walls and walls with openings. The output parameters include shear forces, bending moments, stiffness, and lateral displacements. A comparison of the results obtained using the WCM and the Finite Element Method (FEM) has been presented. WCM can be useful for seismic analysis of CM buildings since it does not require significant computational effort and can be applied using a variety of software packages.

Sign in / Sign up

Export Citation Format

Share Document