scholarly journals A rhomboid-shaped printed monopole antenna for wideband circular polarization

2021 ◽  
Vol 18 (3) ◽  
pp. 385-396
Author(s):  
Zaw Lwin ◽  
Thae Aye
Keyword(s):  
Circular Polarization ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Monopole Antenna ◽  
Center Frequency ◽  
Wireless Applications ◽  
Monopole Antennas ◽  
Printed Monopole Antenna ◽  
Printed Monopole

This paper presents the design of a wideband circularly-polarized printed monopole antenna with a rhomboid shape. The rhomboid-shaped patch is fed by a microstrip line offset from the center to generate circular polarization (CP). The ground plane configuration is optimized for wide bandwidth operation. Bandwidth (satisfying both 10-dB return loss and 3-dB axial ratio) of 76% (1.92 - 4.27 GHz) is achieved in this research. The size of the proposed antenna is 0.386 2 0 l (55?66 mm2) where ?0 is the free space wavelength which corresponds to the center frequency of the bandwidth. The antenna has a fractional bandwidth-size ratio (BW/size) of 1.97 which is higher than most CP monopole antennas in the literature. This antenna is suitable for Wi-Fi, WiMAX, and other wireless applications which outperform using circular polarization.

scholarly journals A Dual-band Circularly-polarized Printed Monopole Antenna for Wi-Fi and WiMAX Applications

2019 ◽  
Vol 4 (2019) ◽  
pp. 50-54
Author(s):  
Zaw Myo Lwin ◽  
Thae Su Aye
Keyword(s):  
Circular Polarization ◽  
Ground Plane ◽  
Axial Ratio ◽  
Monopole Antenna ◽  
Dual Band ◽  
Circularly Polarized ◽  
Printed Monopole Antenna ◽  
Printed Monopole ◽  
Simulation Results ◽  
Microstrip Feed

This paper presents a rectangular-shaped printed monopole antenna with circular polarization for Wi-Fi (2.4–2.484 GHz) and WiMAX (3.3-3.7 GHz) bands. The antenna relies on asymmetric arrangement of the patch with respect to the microstrip feed, in order to generate circular polarization. Dual-band (Wi-Fi and WiMAX) operation is enabled by inserting a slit in the corner of the ground plane. Simulation results show a bandwidth increase of 15.9% (2.2–2.58 GHz) for Wi-Fi, and of 24.16% (3.13–3.99 GHz) for WiMAX applications. Furthermore, beamwidths at the axial ratio of 3 dB equal 48˚ and 51˚ for the x-z plane and y-z planes, respectively.

scholarly journals A Broadband Dual Circularly Polarized Compact Printed Monopole Antenna

2021 ◽  
Author(s):  
Rohit Kumar Saini
Keyword(s):  
Microstrip Line ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Monopole Antenna ◽  
Circularly Polarized ◽  
Antenna Performance ◽  
Printed Monopole Antenna ◽  
Printed Monopole ◽  
Better Than

Abstract A microstrip line –fed broadband dual circular polarized, two port printed monopole antenna is presented. The antenna consists of a ground plane with arrow shaped stub at the corner and a pair of inverted L-shaped feed lines. The 3dB axial ratio bandwidth of the antenna is about 58%(1.7GHz-3.1GHz) in which the return loss and isolation are better than 10dB and 12dB respectively. A parametric study of proposed antenna’s geometric parameters is given for understanding of the antenna performance. The realize gain, reflection coefficient (S 11 ) and transmission coefficient (S 21 ) are higher than 1, 10 and 12dB respectively within the entire axial ratio bandwidth (ARBW).

scholarly journals Ring Slotted Circularly Polarized U-Shaped Printed Monopole Antenna for Various Wireless Applications

2017 ◽  
Vol 6 (1) ◽  
pp. 70 ◽  
Author(s):  
K. G. Jangid ◽  
P. K. Jain ◽  
B. R. Sharma ◽  
V. K. Saxena ◽  
V. S. Kulhar ◽  
...  
Keyword(s):  
Simulation Analysis ◽  
Ground Plane ◽  
Axial Ratio ◽  
Ring Structure ◽  
Monopole Antenna ◽  
Strip Line ◽  
Frequency Range ◽  
Printed Monopole Antenna ◽  
Printed Monopole ◽  
And Performance

In this communication, the design and performance of strip line feed U-shaped printed monopole antenna for Bluetooth/WI-Max/WLAN communications systems is reported. Proposed monopole antenna has an eight shaped slot on the patch and an eight shaped ring structure in the ground plane with metallic reflector just beneath the radiating element. The CST Microwave Studio 2014 is used for the simulation analysis of antennas while measurements are performed by applying Vector Network Analyzer. This radiating structure provides triple broad impedance bandwidths i.e. 265MHz (in 2.280 GHz to 2.545 GHz frequency range), 116 MHz (in 2.660 GHz to 2.776 GHz frequency range) and 2.12 GHz (in 3.83 GHz to 5.956 GHz frequency range), wider 3dB axial ratio bandwidth 1.33 GHz (in 4.69GHz to 6.02GHz range), flat gain (with maximum gain close to 5.56 (dBi) and good radiation patterns in the desired frequency range. This antenna may be a useful structure for 2.45GHz Bluetooth communication band as well as in WLAN and Wi-Max communications bands.

scholarly journals A Compact Printed Monopole Antenna for WiMAX/WLAN and UWB Applications

2018 ◽  
Vol 10 (12) ◽  
pp. 122 ◽  
Author(s):  
Zubin Chen ◽  
Baijun Lu ◽  
Yanzhou Zhu ◽  
Hao Lv
Keyword(s):  
Frequency Band ◽  
High Frequency ◽  
Field Work ◽  
Monopole Antenna ◽  
Center Frequency ◽  
High Frequency Band ◽  
Work Requirements ◽  
Printed Monopole Antenna ◽  
Printed Monopole ◽  
Uwb Applications

In this paper, a printed monopole antenna design for WiMAX/WLAN applications in cable-free self-positioning seismograph nodes is proposed. Great improvements were achieved in miniaturizing the antenna and in widening the narrow bandwidth of the high-frequency band. The antenna was fed by a microstrip gradient line and consisted of a triangle, an inverted-F shape, and an M-shaped structure, which was rotated 90° counterclockwise to form a surface-radiating patch. This structure effectively widened the operating bandwidth of the antenna. Excitation led to the generation of two impedance bands of 2.39–2.49 and 4.26–7.99 GHz for a voltage standing wave ratio of less than 2. The two impedance bandwidths were 100 MHz, i.e., 4.08% relative to the center frequency of 2.45 GHz, and 3730 MHz, i.e., 64.31% relative to the center frequency of 5.80 GHz, covering the WiMAX high-frequency band (5.25–5.85 GHz) and the WLAN band (2.4/5.2/5.8). This article describes the design details of the antenna and presents the results of both simulations and experiments that show good agreement. The proposed antenna meets the field-work requirements of cable-less seismograph nodes.

scholarly journals A Compact Printed Monopole Antenna With Wideband Circular Polarization

IEEE Access ◽  
2018 ◽  
Vol 6 ◽  
pp. 54713-54725 ◽  
Author(s):  
Md. Samsuzzaman ◽  
Mohammad Tariqul Islam ◽  
Mandeep Jit Singh
Keyword(s):  
Circular Polarization ◽  
Monopole Antenna ◽  
Printed Monopole Antenna ◽  
Printed Monopole

scholarly journals Printed UWB Antenna with Coupled Slotted Element for Notch-Frequency Function

2008 ◽  
Vol 2008 ◽  
pp. 1-8 ◽  
Author(s):  
X. L. Bao ◽  
M. J. Ammann
Keyword(s):  
Parametric Study ◽  
Return Loss ◽  
Measured Data ◽  
Monopole Antenna ◽  
Frequency Function ◽  
Uwb Antenna ◽  
Printed Monopole Antenna ◽  
Printed Monopole ◽  
Slotted Plate

A novel printed monopole antenna employing a slotted-plate, which is electromagnetically coupled to the microstrip-fed planar element, is proposed to provide notch-frequency function. This technique enables stopband characteristics with improved control, compared to placing the slot in the microstrip-fed element. A detailed investigation of the rejectband properties has been made for the UWB antenna. Measured data for the optimized case show the 10 dB return loss bandwidth to be 9.8 GHz (from 2.80 GHz to 12.60 GHz) with a notchband frequency from 5.15 GHz to 5.825 GHz. Propagation measurements indicate that the electromagnetically coupled slot provides a greater reduction in stopband gain for the three principal planes, compared to placing the slot in the fed element. This is desirable to mitigate interference from WLAN systems. A full parametric study of the antenna is presented.

Design of Wideband Microstrip Printed Monopole Antenna with Defect Ground Plane

2010 ◽  
Vol 24 (2-3) ◽  
pp. 169-178 ◽  
Author(s):  
K. B. Tan ◽  
X. An ◽  
F. F. Fan ◽  
C. H. Liang
Keyword(s):  
Ground Plane ◽  
Monopole Antenna ◽  
Printed Monopole Antenna ◽  
Printed Monopole
Sign in / Sign up

Export Citation Format

Share Document