scholarly journals A theory of strain-gradient plasticity with effect of internal microforce

2017 ◽  
Vol 44 (1) ◽  
pp. 1-13 ◽  
Author(s):  
Adebowale Borokinni ◽  
Adegbola Akinola ◽  
Olawanle Layeni

This paper develops a theory of strain gradient plasticity for isotropic bodies undergoing small deformation in the absence of plastic spin. The proposed theory is based on a system of microstresses which include a microstress vector consistent with microforce balance; the mechanical form of the second law of thermodynamics which includes work performed by the microstresses during plastic flow; and a constitutive theory that allows the free energy to depend on the elastic strain E??, divergence of plastic strain div E?? and the Burgers tensor G. Substitution of the constitutive relations into the microforce balance leads to a nonlinear partial differential equation in the plastic strain known as flow rule which captures the presence of an additional energetic length scale arising from the accounting of microstress vector. In addition to the flow rule, nonstandard boundary conditions are obtained, and as an aid to finite element solution a variational formulation of the flow rule is deduced. Finite element solution is obtained of one-dimensional problem of viscoplastic simple shearing under gravity force, where it is shown that for a fixed dissipative length scale, increase in the energetic length scales will result in decrease in the plastic strain.

2018 ◽  
Vol 45 (2) ◽  
pp. 177-188
Author(s):  
Adebowale Borokinni ◽  
Odunayo Fadodun ◽  
Adegbola Akinola

This article considers a plane strain gradient plasticity theory of the Gurtin?Anand model [M. Gurtin, L. Anand, A theory of strain gradient plasticity for isotropic, plastically irrotational materials Part I: Small deformations, J. Mech. Phys. Solids 53 (2005), 1624?1649] for an isotropic material undergoing small deformation in the absence of plastic spin. It is assumed that the system of microstresses is purely dissipative, so that the free energy reduces to a function of the elastic strain, while the microstresses are only related to the plastic strain rate and gradient of the plastic strain rate via the constitutive relations. The plane strain problem of the Gurtin?Anand model for a purely dissipative process gives rise to elastic incompressibility. A weak formulation of the flow rule is derived, making the plane strain problem suitable for finite element implementation.


2009 ◽  
Vol 24 (3) ◽  
pp. 749-759 ◽  
Author(s):  
D. Chicot ◽  
F. Roudet ◽  
V. Lepingle ◽  
G. Louis

The hardness of a material is generally affected by the indentation size effect. The strain gradient plasticity (SGP) theory is largely used to study this load dependence because it links the hardness to the intrinsic properties of the material. However, the characteristic scale-length is linked to the macrohardness, impeding any sound discussion. To find a relevant parameter, we suggest introducing a hardness length-scale factor that only depends on the shear modulus and the Burgers vector of the material and is easily calculable from the relation of the SGP theory. The variation of the hardness length-scale factor is thereafter used to discuss the hardness behavior of a magnetite crystal, the objective being to study the effect of the cumulative plasticity resulting from cyclic indentation. As a main result, the hardness length-scale factor is found to be constant by applying repeated cycles at a constant peak load whereas the macrohardness and the characteristic scale-length are both cycle dependent. When using incremental loads, the hardness length-scale factor monotonically decreases between two limits corresponding to those obtained at high and low loading rates, while the dwell-load duration increases. The physical meaning of such behavior is based on the modification of the dislocation network during the indentation process depending on the deformation rate.


2017 ◽  
Vol 23 (9) ◽  
pp. 1333-1344 ◽  
Author(s):  
AS Borokinni ◽  
AP Akinola ◽  
OP Layeni ◽  
OO Fadodun

This study considers strain-gradient plasticity theory in the context of small deformations for an isotropic solid body with a view to investigating the distortion effects associated with the divergence of plastic strain through the Burgers tensor. The principle of virtual power is employed and the constraint of irrotationality is imposed on the plastic component of the gradient of the displacement vector. It is obtained that the gradient, curl, and divergence of the plastic strain in the body are mutually related. This relation establishes the existence of work done through the divergence of plastic strain as distinct from the work done through the gradient of the plastic strain. Consequently, a polycrystalline solid body undergoing distortion associated with the divergence of plastic strain exhibits new internal microstresses; and the obtained model, consisting of the microforce balance, constitutive relations, and plastic flow rule, extends the known Gurtin–Anand model in a natural fashion. Furthermore, in the governing flow rule, it is revealed that the internal microstresses associated with the divergence of plastic strain act as opposing agents to the internal microstresses associated with the gradient of the plastic strain via the length scales Q, L, and the gradient of the divergence of the plastic strain. This work shows the distortion effects associated with the divergence of plastic strain which the Gurtin–Anand strain-gradient plasticity theory in literature does not apprehend.


2016 ◽  
Vol 725 ◽  
pp. 41-46
Author(s):  
Mitsutoshi Kuroda

In this paper, strain gradient plasticity theory is extended to include the corner-like effect that is inherent in crystal plasticity. The predictive feature of the extended theory is examined via finite element analysis of a constrained simple shear problem and a plane-strain tension problem involving plastic flow localization. Numerical issues with respect to finite element formulations are also discussed.


2006 ◽  
Vol 441 (1-2) ◽  
pp. 299-307 ◽  
Author(s):  
J. Lou ◽  
P. Shrotriya ◽  
S. Allameh ◽  
T. Buchheit ◽  
W.O. Soboyejo

Sign in / Sign up

Export Citation Format

Share Document