scholarly journals Design and performance evaluation of a novel self-rotating fuel injector using computational fluid dynamics - a preliminary study

2020 ◽  
Vol 24 (1 Part A) ◽  
pp. 271-280
Author(s):  
Pichandi Chandrasekar ◽  
Neelakantan Prasad ◽  
Varadarajan Balamurugan ◽  
Natteri Sudharsan
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Performance Evaluation ◽  
Thermal Efficiency ◽  
Cfd Simulation ◽  
Design Procedure ◽  
Fuel Injector ◽  
Preliminary Study ◽  
And Performance ◽  
Rotating Injector

Improving the performance and reducing emissions in a diesel engine is the single most objective in current research. Various methods of approach have been studied and presented in literature. A novel but not so pursued study is on the performance of a rotating diesel injector. To date, there has been very little study by implementing a rotating injector. Studies have shown an improvement on the performance of an engine, but with a complicated external rotating mechanism. In the present research, a novel self-rotating fuel injector is designed and developed that is expected to improve the performance without the need for a complicated rotating mechanism. The design procedure, CFD simulation along with 3-D printing of a prototype is presented. Numerical modelling and simulation are performed to study the combustion characteristics of the rotating injector viz-a-viz a standard static injector. Comparison based on heat release, efficiency, and emissions are presented. While the proposed 9-hole injector had slight loss in thermal efficiency, the modified 5-hole had a slight increase in thermal efficiency when compared to the static baseline readings. The NOx reduced by 13% and CO increased by 14% compared baseline emissions for the 5-hole version.

scholarly journals Experimental investigation energy balance and distribution of a turbocharged GDI engine fuelled with ethanol and gasoline blend under transient and steady-state operating conditions

2020 ◽  
Vol 24 (1 Part A) ◽  
pp. 243-257 ◽  
Author(s):  
Xiongbo Duan ◽  
Yiqun Liu ◽  
Xianjie Zhou ◽  
Peng Zou ◽  
Jingping Liu
Keyword(s):  
Experimental Investigation ◽  
Steady State ◽  
Thermal Efficiency ◽  
Cfd Simulation ◽  
Design Procedure ◽  
Operating Conditions ◽  
Fuel Injector ◽  
Gdi Engine ◽  
Rotating Injector ◽  
Transient And Steady State

Improving the performance and reducing emissions in a Diesel engine is the single most objective in current research. Various methods of approach have been studied and presented in literature. A novel but not so pursued study is on the performance of a rotating diesel injector. To date, there has been very little study by implementing a rotating injector. Studies have shown an improvement on the performance of an engine, but with a complicated external rotating mechanism. In the present research, a novel self-rotating fuel injector is designed and developed that is expected to improve the performance without the need for a complicated rotating mechanism. The design procedure, CFD simulation along with 3- D printing of a prototype is presented. Numerical modelling and simulation are performed to study the combustion characteristics of the rotating injector viz-a-viz a standard static injector. Comparison based on heat release, efficiency, and emissions are presented. While the proposed 9-hole injector had slight loss in thermal efficiency, the modified 5-hole had a slight increase in thermal efficiency when compared to the static baseline readings. The NOx reduced by 13% and CO increased by 14% compared baseline emissions for the 5-hole version.

Integrated Approach to Multiphase Flow Regime Prediction Through Computational Fluid Dynamics CFD

2021 ◽  
Author(s):  
Matt Straw ◽  
Ravindra Aglave ◽  
Rodolfo Piccioli
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Multiphase Flow ◽  
Case Studies ◽  
Cfd Simulation ◽  
Process Systems ◽  
Computational Fluid Dynamics Cfd ◽  
And Performance ◽  
Modelling Methods ◽  
Modelling Approaches

Abstract This paper presents recent advances in multiphase modelling methods in Computational Fluid Dynamics (CFD). It uses case studies to show how integration of advanced multiphase modelling approaches can improve the fidelity and realism of simulation of separation and process systems; helping improve design and performance. CFD has been widely used to aid the design and operational performance of many separation and multiphase production and process systems; often providing significant insight and performance improvement. Traditionally, numerous compromises or simplifications must be made when simulating complex multiphase flows and their transitions within production and separation systems using CFD. For example, the modelling methods applicable to capture gas-liquid or liquid-liquid interface behaviour are not suitable (or practical) to also capture gas columns, liquid films or liquid entrainment phenomena, that may be important to quantifying overall system performance. To accommodate different multiphase phenomena and flow regimes, multiple CFD simulations or approaches have often been required. This can limit the insight or fidelity of a given simulation or, in some cases, mean overall performance cannot be fully quantified (even though useful performance indicators may still be identified). Here, the authors present advances in hybrid multiphase modelling and how integration of multiphase modelling approaches enables multiple multiphase flow regimes and their transition to be captured through CFD simulation. The paper will demonstrate how these advances enables simulation of more complex behaviours with increased fidelity. Examples, case studies and validation cases are presented demonstrating phenomena including bulk liquid interface break-up, liquid film formation and entrainment of droplets plus their break—up and deposition. The examples will be presented in the context of the improvements possible in simulation fidelity and realism, of multiphase systems, and how this can impact the insight and value gained from CFD simulation in this complex field. The work presented shows how new developments and evolution of CFD-based predictions can advance how the industry uses this approach and the value that can be obtained. It highlights how integration of the most advanced modelling approaches and methods is key to the next stage of application of CFD to enable better representation of the full range of fluid mechanics that are critical to many separation and multiphase system designs and performance.

scholarly journals Computational Fluid Dynamics (CFD) Simulation on Mixing in T-Shaped Micromixer

2020 ◽  
Vol 932 ◽  
pp. 012006
Author(s):  
S N A Ahmad Termizi ◽  
C Y Khor ◽  
M A M Nawi ◽  
Nurlela Ahmad ◽  
Muhammad Ikman Ishak ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Simulation ◽  
Computational Fluid Dynamics Cfd

A Study on the Performance of Stratified Air Conditioning Design in Assembly Halls – A Case Study at the Dazhi Cultural Center in Taiwan

2013 ◽  
Vol 368-370 ◽  
pp. 599-602 ◽  
Author(s):  
Ian Hung ◽  
Hsien Te Lin ◽  
Yu Chung Wang
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Indoor Air ◽  
Air Conditioning ◽  
Cfd Simulation ◽  
Indoor Temperature ◽  
Cultural Center ◽  
Computational Fluid Dynamics Cfd

This study focuses on the performance of air conditioning design at the Dazhi Cultural Center and uses a computational fluid dynamics (CFD) simulation to discuss the differences in wind velocity and ambient indoor temperature between all-zone air conditioning design and stratified air conditioning design. The results have strong implications for air conditioning design and can improve the indoor air quality of assembly halls.

Tonal Noise Reduction in a Radial Fan With Forward-Curved Blades

2014 ◽  
Author(s):  
Manoochehr Darvish ◽  
Bastian Tietjen ◽  
Daniel Beck ◽  
Stefan Frank
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Aerodynamic Performance ◽  
Computational Aeroacoustics ◽  
Experimental Measurements ◽  
Noise Generation ◽  
Tonal Noise ◽  
Outlet Angle ◽  
And Performance ◽  
Impeller Geometry

The main focus of this work is on the geometrical modifications that can be applied to the fan wheel and the volute tongue of a radial fan to reduce the tonal noise. The experimental measurements are performed by using the in-duct method in accordance with ISO 5136. In addition to the experimental measurements, CFD (Computational Fluid Dynamics) and CAA (Computational Aeroacoustics) simulations are carried out to investigate the effects of different modifications on the noise and performance of the fan. It is shown that by modifying the blade outlet angle, the tonal noise of the fan can be reduced without affecting the performance of the fan. Moreover, it is indicated that increasing the number of blades leads to a significant reduction in the tonal noise and also an improvement in the performance. However, this trend is only valid up to a certain number of blades, and a further increment might reduce the aerodynamic performance of the fan. Besides modifying the impeller geometry, new volute tongues are designed and manufactured. It is demonstrated that the shape of the volute tongue plays an important role in the tonal noise generation of the fan. It is possible to reduce the tonal noise by using stepped tongues which produce phase-shift effects that lead to an effective local cancellation of the noise.

Sign in / Sign up

Export Citation Format

Share Document