scholarly journals The relationship of vertical skeletofacial morphology to oropharyngeal airway shape using cone beam computed tomography: Possible implications for airway restriction

2013 ◽  
Vol 84 (3) ◽  
pp. 548-554 ◽  
Author(s):  
Jennifer A. Haskell ◽  
Bruce S. Haskell ◽  
Michael E. Spoon ◽  
Changyong Feng

ABSTRACT Objective: To determine if the shape of the oropharyngeal airway is related to the vertical morphology of the skeletofacial complex, including the hyoid bone. Materials and Methods: Cone beam computed tomography scans from 50 pretreatment adult orthodontic records were used to obtain skeletal and airway measurements. Linear regression statistics were used to compare soft tissue variables to hard tissue predictor variables. Results: Transverse airway widening was significantly increased when the distance between the hyoid and vertebrae was reduced; when the three-dimensional (3D) facial axis angle decreased (became more vertical); when the 3D mandibular plane angle increased; when the width of the hyoid increased, or when the calculated length of the geniohyoid decreased. Conclusions: A laterally elliptical airway—found when the face is more vertical and when the hyoid is closer to the cervical vertebrae—is hypothetically more resistant to collapse. Patients with a retrognathic, skeletal deep bite and a rounded oropharynx should be identified and corrected early to prevent potential airway problems.

2020 ◽  
Vol 90 (6) ◽  
pp. 866-872
Author(s):  
Paige Covington Riddle ◽  
Jeffrey C. Nickel ◽  
Ying Liu ◽  
Yoly M. Gonzalez ◽  
Luigi M. Gallo ◽  
...  

ABSTRACT Objectives To test the hypotheses that mechanobehavior scores (MBS) were correlated with mandibular ramus lengths (Co-Go) and differed between facial phenotypes. Materials and Methods Subjects gave informed consent to participate. Co-Go (mm), mandibular plane angles (SN-GoGn, °), and three-dimensional anatomy were derived from cephalometric radiography or cone beam computed tomography. Temporomandibular joint (TMJ) energy densities (ED) (mJ/mm3) were measured using dynamic stereometry and duty factors (DF) (%) were measured from electromyography, to calculate MBS (= ED2 × DF,) for each TMJ. Polynomial regressions, K-means cluster analysis, and analysis of variance (ANOVA) with Tukey post-hoc tests were employed. Results Fifty females and 23 males produced replete data. Polynomial regressions showed MBS were correlated with Co-Go (females, R2 = 0.57; males, R2 = 0.81). Cluster analysis identified three groups (P < .001). Dolichofacial subjects, with shorter normalized Co-Go, clustered into two subgroups with low and high MBS compared to brachyfacial subjects with longer Co-Go. SN-GoGn was significantly larger (P < .03) in the dolichofacial subgroups combined (33.0 ± 5.9°) compared to the brachyfacial group (29.8 ± 5.5°). Conclusions MBS correlated with Co-Go within sexes and differed significantly between brachyfacial and dolichofacial subjects.


2018 ◽  
Vol 1 (1) ◽  
pp. 44-50
Author(s):  
Apeksha Mainali ◽  
A Vaidya

Background: Clinicians should assess and monitor mandibular canal (MC) to achieve an uneventful and successful final result. Two dimensional techniques like panoramic radiography, intra oral periapical radiographs are commonly used for assessment of MC, along with three dimensional techniques like cone beam computed tomography (CBCT).Objectives: To assess the radiologic modalities and assessment criteria used by clinically practicing dental surgeons when determining the proximity of MC to third molars.Method: A questionnaire based study was carried out among national and international oral maxillofacial surgeons and general dental practitioners. Data were fed to SPSS software version 21 for descriptive statistics.Result: Most of the participants (54.7%) in the study preferred combination of panoramic radiograph and CBCT for determining the relationship of mandibular canal and third molars measures.Conclusion: Initial screening can be carried out using panoramic radiograph which is a popular method in determining the relation between the third molar and mandibular canal in spite of some limitations. Cone Beam Computed Tomography is an important three-dimensional imaging technique which is a preferred method amongst most dental surgeons.Journal of BP Koirala Institute of Health Sciences, Vol. 1, No. 1, 2018, page: 44-50


Diagnostics ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 757
Author(s):  
Maged Sultan Alhammadi ◽  
Abeer Abdulkareem Al-mashraqi ◽  
Rayid Hussain Alnami ◽  
Nawaf Mohammad Ashqar ◽  
Omar Hassan Alamir ◽  
...  

The study sought to assess whether the soft tissue facial profile measurements of direct Cone Beam Computed Tomography (CBCT) and wrapped CBCT images of non-standardized facial photographs are accurate compared to the standardized digital photographs. In this cross-sectional study, 60 patients with an age range of 18–30 years, who were indicated for CBCT, were enrolled. Two facial photographs were taken per patient: standardized and random (non-standardized). The non-standardized ones were wrapped with the CBCT images. The most used soft tissue facial profile landmarks/parameters (linear and angular) were measured on direct soft tissue three-dimensional (3D) images and on the photographs wrapped over the 3D-CBCT images, and then compared to the standardized photographs. The reliability analysis was performed using concordance correlation coefficients (CCC) and depicted graphically using Bland–Altman plots. Most of the linear and angular measurements showed high reliability (0.91 to 0.998). Nevertheless, four soft tissue measurements were unreliable; namely, posterior gonial angle (0.085 and 0.11 for wrapped and direct CBCT soft tissue, respectively), mandibular plane angle (0.006 and 0.0016 for wrapped and direct CBCT soft tissue, respectively), posterior facial height (0.63 and 0.62 for wrapped and direct CBCT soft tissue, respectively) and total soft tissue facial convexity (0.52 for both wrapped and direct CBCT soft tissue, respectively). The soft tissue facial profile measurements from either the direct 3D-CBCT images or the wrapped CBCT images of non-standardized frontal photographs were accurate, and can be used to analyze most of the soft tissue facial profile measurements.


2020 ◽  
Vol 5 (1) ◽  
Author(s):  
Ateksha Bhardwaj Khanna

Abstract Background Endodontic disease can adversely affect the quality of life and therefore early diagnosis and consequent timely treatment is of paramount importance for the Endodontist. Radiology is an essential component in treatment planning, disease monitoring and assessment of treatment outcome. Periapical radiographs and panoramic radiography are frequently utilised but they provide only two-dimensional representation of three-dimensional structures. The advent of cone beam computed tomography (CBCT) offers three-dimensional accuracy of the hard tissue images with a reasonable cost and this has revolutionised imaging of the dentomaxillofacial structures. This imaging system has been seen to overcome some limitations of conventional radiography, as brought out in this review. The improvement in the accuracy is, however, accompanied at the cost of increased radiation exposure to the patient. Nevertheless, smaller areas of exposure are normally appropriate for endodontic imaging, and adjustment in the exposure parameters can further moderate the effective dose (Loubele et al. 37(6):309-18, 2008). Aims and objectives The aim of this review is to present the pertinent literature on the various applications of cone beam computed tomography in the field of endodontics. Methods Literature was electronically searched on the following sources; Medline and Keats Library. Further, a manual search was performed on the following journals: International Endodontic Journal, Journal of Endodontics, Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, Endodontology, Journal of Dental Research, European Journal of Oral Sciences & Odontology and Dentomaxillofacial Radiology. A preliminary search was performed to gain an idea of the available literature using keywords ‘Cone Beam Computed Tomography’ to view the volume of the literature evident and identify questions to be addressed in this review. The initial search showed 243 potential articles. After scrutinising the titles and abstracts of the retrieved articles, 70 relevant studies were reviewed in full text. Furthermore, ‘published guidelines on the use of CBCT’ were also searched so as to include the results as an additional source material. All the articles eligible to be included in the review were in the English language and ranged from the year 1960 to the present. Also all the studies reviewed were based on the various uses of cone beam computed tomography in the field of endodontics. The keywords used to search were ‘Cone Beam Computed Tomography (CBCT)’, ‘Conventional radiography’, ‘Applications of CBCT in endodontics’, ‘CBCT and tooth morphology’, ‘CBCT and apical periodontitis’, ‘CBCT and vertical root fractures’, ‘CBCT and resorption’, ‘CBCT and pre-surgical assessment’, ‘CBCT and dento-alveolar trauma’ and ‘CBCT and endodontic outcome’. Results Every case is unique and CBCT should be considered only after studying each case individually. CBCT imaging needs to be adopted or used where information from conventional imaging systems is either inadequate for the management of endodontic problems or inconclusive. Having said that, it is safe to state that CBCT imaging has the potential to become the first choice for endodontic treatment planning and outcome assessment, especially when new scanners with lower radiation doses and enhanced resolution would be available.


Sign in / Sign up

Export Citation Format

Share Document