Intergranular Fracture in BCC Metals

When sharp metal filaments of W, Fe, Nb or Ta are observed in the field-ion microscope (FIM), their appearance is differentiated primarily by variations in regional brightness. This regional brightness, particularly prominent at liquid nitrogen temperature has been attributed in the main to chemical specificity which manifests itself in a paricular array of surface-atom electron-orbital configurations.Recently, anomalous image brightness and streaks in both fcc and bee materials observed in the FIM have been shown to be the result of surface asperities and related topographic features which arise by the unsystematic etching of the emission-tip end forms.

Download Full-text

Solid Solution Effects and Deformation Micros trueture of Shock-Loaded Iron Manganese Alloys

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069090 ◽

1970 ◽

Vol 28 ◽

pp. 420-421

Author(s):

A. Christou ◽

J. V. Foltz ◽

N. Brown

Keyword(s):

Solid Solution ◽

Shock Loading ◽

High Strain ◽

Local Stress ◽

Strain Rates ◽

Local Stress Concentration ◽

Bcc Metals ◽

Manganese Alloys ◽

Iron Manganese ◽

Transmission Microscope

In general, all BCC transition metals have been observed to twin under appropriate conditions. At the present time various experimental reports of solid solution effects on BCC metals have been made. Indications are that solid solution effects are important in the formation of twins. The formation of twins in metals and alloys may be explained in terms of dislocation mechanisms. It has been suggested that twins are nucleated by the achievement of local stress-concentration of the order of 15 to 45 times the applied stress. Prietner and Leslie have found that twins in BCC metals are nucleated at intersections of (110) and (112) or (112) and (112) type of planes.In this paper, observations are reported of a transmission microscope study of the iron manganese series under conditions in which twins both were and were not formed. High strain rates produced by shock loading provided the appropriate deformation conditions. The workhardening mechanisms of one alloy (Fe - 7.37 wt% Mn) were studied in detail.

Download Full-text

Morphology and atomic structure of segregated grain boundaries in Cu-Sb

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100121673 ◽

1992 ◽

Vol 50 (1) ◽

pp. 254-255

Author(s):

R. W. Fonda ◽

D. E. Luzzi

Keyword(s):

Grain Boundary ◽

Grain Boundaries ◽

Intergranular Fracture ◽

Atomic Structure ◽

Copper Alloys ◽

Polycrystalline Materials ◽

Grain Boundary Embrittlement ◽

Boundary Embrittlement

The properties of polycrystalline materials are strongly dependant upon the strength of internal boundaries. Segregation of solute to the grain boundaries can adversely affect this strength. In copper alloys, segregation of either bismuth or antimony to the grain boundary will embrittle the alloy by facilitating intergranular fracture. Very small quantities of bismuth in copper have long been known to cause severe grain boundary embrittlement of the alloy. The effect of antimony is much less pronounced and is observed primarily at lower temperatures. Even though moderate amounts of antimony are fully soluble in copper, concentrations down to 0.14% can cause grain boundary embrittlement.

Download Full-text