scholarly journals Optimisation of Biodiesel Synthesis from Waste Cooking Oil in the Reactive Distillation Column Using Taguchi Methodology

Author(s):  
Mehmet ÇAĞATAY ◽  
Şeyda ÇAĞATAY ◽  
Suleyman KARACAN
2013 ◽  
Vol 14 (3) ◽  
pp. 219 ◽  
Author(s):  
Dwi Kartika ◽  
Senny Widyaningsih

Transesterification of waste cooking oil into biodiesel using KOH catalyst with and without esterification process usingactivated natural zeolite (ZAH) catalyst has been carried out. Activation of the zeolite was done by refluxing with HCl 6Mfor 30 min, followed calcining and oxydized at 500oC for 2 hours, consecutively. The transesterification without esterificationprocess were done using KOH catalyst 1% (w/w) from oil and methanol weight and oil/methanol molar ratio 1:6 at 60oC. Theesterification reaction was also done using ZAH catalyst then continued by transesterification using KOH catalyst inmethanol media. In order to study the effect of ZAH catalyst concentration at constant temperature, the catalysts werevaried, i.e. 0, 1, 2, and 3% (w/w). To investigate the effect of temperature, the experiments were done at various temperaturefrom 30, 45, 60, and 70oC at constant catalyst concentration. The conversion of biodiesel was determined by 1H-NMRspectrometer and physical properties of biodiesel were determined using ASTM standard methods. The results showedthat the transesterification using KOH catalyst without esterification produced biodiesel conversion of 53.29%. The optimumcondition of biodiesel synthesis via esterification process were reached at 60oC and concentration of ZAH catalyst of2% (w/w), that could give biodiesel conversion = 100.00%. The physical properties were conformed with biodiesel ASTM2003b and Directorate General of Oil and Gas 2006 specification.


2021 ◽  
pp. 20-27
Author(s):  
Ngee Sing Chong ◽  
Francis Uchenna Okejiri ◽  
Saidi Abdulramoni ◽  
Shruthi Perna ◽  
Beng Guat Ooi

Due to the high cost of feedstock and catalyst in biodiesel production, the viability of the biodiesel industry has been dependent on government subsidies or tax incentives. In order to reduce the cost of production, food wastes including eggshells and oyster shells have been used to prepare calcium oxide (CaO) catalysts for the transesterification reaction of biodiesel synthesis. The shells were calcined at 1000 °C for 4 hours to obtain CaO powders which were investigated as catalysts for the transesterification of waste cooking oil. The catalysts were characterized by Fourier Transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray powder diffraction (XRD), and X-ray fluorescence (XRF) spectroscopy. Reaction parameters such as methanol-to-oil molar ratio, CaO catalyst concentration, and reaction time were evaluated and optimized for the percentage conversion of cooking oil to biodiesel esters. The oyster-based CaO showed better catalytic activity when compared to the eggshell-based CaO under the same set of reaction conditions.


2019 ◽  
Vol 1175 ◽  
pp. 012281 ◽  
Author(s):  
Taslim ◽  
Boy Andika Sinaga ◽  
Monica Nathalia Sihaloho ◽  
Iriany ◽  
Okta Bani

2019 ◽  
Vol 19 (2) ◽  
pp. 62
Author(s):  
Syarifuddin Oko ◽  
Andri Kurniawan

Chicken eggshells can be used as raw material in the manufacture of CaO catalysts. Increased CaO catalyst activity can be done by the impregnation method. The purpose of this study was to determine the effect of %K on the wet impregnation of CaO catalyst using KOH and to find out the impregnation catalyst (CaO / K2O) on the biodiesel yield. Prepared chicken egg shells were calcined at 900oC for 3 hours. Then the CaO obtained was impregnated using KOH with a variation of % K (5%, 7%, 9% and 12% (w / w)) while heated at 85oC. The impregnation product was calcined at 600oC for 5 hours. The impregnation catalyst (CaO K2O) was applied to the biodiesel synthesis through a transesterification reaction with a mole ratio of 1:12 waste cooking oil: methanol, the amount of catalyst was 1.5% at a reaction temperature of 70°C for 2.5 hours. Based on the results of SEM-EDS analysis, the highest K2O at 7% K was 21.99%), while the highest CaO content was at 9% K by 81.53%. For the highest surface area analysis at 7% K with a surface area of 71.22 m2 / g, alkalinity was 2.59 mmol / g. The best biodiesel was obtained with a yield of 87.17%, kinematic viscosity of 2.89 cSt, water content of 0.032%, density of 0.819 g/ml, methyl ester level of 99.39%.


Author(s):  
Mansoor Anbia ◽  
Sotoudeh Sedaghat ◽  
Samira Saleh ◽  
Sholeh Masoomi

The synthesized nanomaterials by two different methods were used as a catalyst in the transesterification of waste cooking oil to produce biodiesel. For both environmental and economic reasons, it is beneficial to produce biodiesel from waste cooking oils. It is desirable to help solve waste oil disposal by utilizing its oils as an inexpensive starting material in biodiesel synthesis. The structure, morphology, and surface properties of resulting nanocatalysts were characterized by X-ray Fluorescence Spectroscopy (XRF), Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Energy Dispersive X-ray Spectroscopy (EDX) and N2 adsorption-desorption isotherms. The synthesized nanocatalysts' efficiency in the production of biodiesel was studied by Gas Chromatography (GC) as well as leaching amounts of surface active components of each catalyst investigated by the EDX technique. The reactions were performed at 65°C using a 9:1 methanol to oil ratio for 3 h. The results indicate that the impregnated mixed metal oxide catalyst ( Ca-MgAl) shows a higher surface area and better mechanical strength than the totally co-precipitated mixed metal oxide catalyst (CaMgAl(O)). Although both of the fully co-precipitated and impregnated catalysts represented about 90% of fatty acid methyl esters (FAME) yield the leaching of active calcium component was significantly reduced from 45.8% in precipitated CaMgAl(O) to 8% for the impregnated Ca-MgAl catalyst. This improved structure represents the advantage of the impregnation technique to co-precipitation procedure for fabrication of robust nanostructures.


2021 ◽  
Author(s):  
Massimiliano Errico ◽  
Mikkel T. Grosmann ◽  
Thalles A. Andrade ◽  
Luigi di Bitonto ◽  
Carlo Pastore ◽  
...  

Author(s):  
Lizda Johar Mawarani ◽  
Thomas Andherson Sihombing ◽  
Doty Dewi Risanti ◽  
Muhannad Illayan Massadeh ◽  
Dwi Prananto

Solid oxides are the most used catalyst for the synthesis of biodiesel, one of which is calcium oxide (CaO). This research reports the synthesis of CaO catalysts sourced from chicken eggshells through the calcination process. Chicken eggshells were cleaned and dried for 24 h at 120 oC. The eggshells were then calcined at temperatures varying from 600 oC to 900 oC for 6 h and the resulted sample were characterized by FTIR and XRD. The biodiesel synthesis was conducted at 65 ºC with a reaction time of 2 h and the concentration of catalyst was varied at 3 wt%, 6 wt%, and 9 wt%. The optimal biodiesel synthesis was obtained at a concentration of CaO catalyst formed at a calcination temperature of 900 ºC at 9 wt%. The yield of biodiesel conversion was obtained at 81.43 % and glycerol was produced as a by-product.


Sign in / Sign up

Export Citation Format

Share Document