A survey of the class 3R accessible emission limits relative to bioeffects data

Author(s):  
Robert J. Thomas ◽  
Amber M. Allardice ◽  
Jeffrey R. Pfoutz ◽  
Benjamin A. Rockwell
Keyword(s):  
2017 ◽  
pp. 534-537
Author(s):  
Nico Antens ◽  
Jan L.M. Struijs

At beet sugar production, vapors from first and second carbonatation contain a significant amount of odor components, NH3 and waste heat, which are normally directly released into the environment. Due to sustainability motivations, obligations regarding odor nuisance and expected stricter regulations regarding NH3 emission limits, Suiker Unie decided to take measures to reduce emission via the carbonatation vapors. During the 2015 beet campaign, pilot scale plant trials have been performed to investigate the effectiveness of indirect contact and direct contact condensation of these vapors. Based on this experimental work a two-stage gas scrubbing concept was designed: in the first stage main goal is condensing the vapors and reuse the heat of condensation to heat up limed juice, while the actual scrubbing takes place in the second scrubber. This two-stage gas scrubbing installation has been built at the Vierverlaten factory and was started up in the 2016 beet campaign. The background, pilot scale trials, concept of design and achieved reductions in odor and NH3 emission at industrial scale are discussed.


1999 ◽  
Vol 39 (4) ◽  
pp. 185-192 ◽  
Author(s):  
A. M. J. Ragas ◽  
R. S. E. W. Leuven

Water authorities apply a diversity of models and input data to set water quality-based emission limits in discharge permits. To illustrate the consequences of model and data selection, two complete mixing models and four mixing zone models used in Germany, the United Kingdom (UK), the Netherlands and the United States of America (USA) were selected and applied to various discharges of cadmium. The maximum allowable annual cadmium load was calculated for each model and diverging input data for upstream flow, upstream concentration, effluent flow and effluent concentration. Due to model selection, differences in pollutant loads amounted to a factor 3. Harmonisation of the derivation of water quality-based emission limits is necessary to prevent widely divergent pollutant loads under comparable environmental conditions.


Physics ◽  
2021 ◽  
Vol 14 ◽  
Author(s):  
Christopher Crockett
Keyword(s):  

2012 ◽  
Vol 14 (4) ◽  
pp. 81-96
Author(s):  
Małgorzata Burchard-Dziubińska

The text analyses the influence of the EU climate policy on the competitiveness pollution-generating of sectors of the Polish economy. Study of literature and the results of the questionnaire survey, carried out in 2008 in enterprises located in Poland and representing the steel, glass, aluminium and cement industries became a basis for formulating conclusions concerning the consequences of the climate policy already implemented and planned after 2012. The EU climate policy, particularly the common system of emission allowances trade, makes the enterprises face new developmental barriers. The expected increase in production costs will not only slow down the production dynamics, but may also entail lowering the competitiveness of Polish companies compared to companies from outside the EU, to which the greenhouse gasses emission limits do not apply. Adverse consequences for employment and for regional development should also be considered indisputable. If that was accompanied by an emission leakage outside the EU, achieving the global purposes of the climate policy would also become questionable. The businesses surveyed represent industries which are pollution generators by their nature and even ecologically-oriented technological progress is incapable of ensuring considerable emission reductions without general switching of the economy to renewable energy sources.


2012 ◽  
Vol 6 (3) ◽  
pp. 256 ◽  
Author(s):  
S. Bhattacharyya ◽  
S. Cobben ◽  
P. Ribeiro ◽  
W. Kling

Fluids ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 19
Author(s):  
Emmanuele D’Andrea ◽  
Maurizio Arena ◽  
Massimo Viscardi ◽  
Tommaso Coppola

An increasing attention has recently been paid to the effect of the underwater noise field generated by ship activities on the marine environment. Although this problem is widely discussed in international treaties and conventions, it has not yet found a consolidated technical-scientific treatment capable of quantifying the level of underwater noise emissions produced by naval systems. As part of a national research collaboration, a novel code has been developed to predict noise propagation according to the Ray Tracing approach. Such optical geometry-based technique allows for calculating the Transmission Loss (TL) trend in its respective contributions: geometrical loss (due to the distance between the source and receiver), dissipation loss (due to the characteristics of the propagation environment), and reflection loss (due to the surfaces that delimit the field). The simulation requires as input parameters the source info as spatial position, frequency, and sound pressure level (SPL) as well as the sea properties like seabed depth, the speed of sound profile, the layers thickness the water column is divided into, the sea salinity, temperature, and pH. The simulation code provides the SPL spatial distribution useful as a fast industrial tool in the future studies addressed to identify the emission limits for the protection of marine wildlife.


Sign in / Sign up

Export Citation Format

Share Document