Compact Wideband MIMO Antenna System for 5G Metal Frame Mobile Phones

Author(s):  
Daiwei Huang ◽  
Zhengwei Du
2019 ◽  
Vol 18 (8) ◽  
pp. 1586-1590 ◽  
Author(s):  
Daiwei Huang ◽  
Zhengwei Du ◽  
Yan Wang

Author(s):  
Tommy Hult ◽  
Abbas Mohammed

Several studies have been conducted on the effects of radiation on the human body. This has been especially important in the case of radiation from hand held mobile phones. The amount of radiation emitted from most mobile phones is very small, but given the close proximity of the phone to the head it might be possible for the radiation to cause harm. The suggested approach involves the use of adaptive active control algorithms and a full space-time processing system setup (i.e. multiple antennas at both the transmitter and receiver side or MIMO), with the objective of reducing the possibly harmful electromagnetic radiation emitted by hand held mobile phones. Simulation results show the possibility of using the adaptive control algorithms and MIMO antenna system to attenuate the electromagnetic field power density.


IEEE Access ◽  
2021 ◽  
pp. 1-1
Author(s):  
Phalguni Mathur ◽  
Robin Augustine ◽  
M. Gopikrishna ◽  
Sujith Raman

2015 ◽  
Vol 60 ◽  
pp. 47-56 ◽  
Author(s):  
Lingsheng Yang ◽  
Hongling Xu ◽  
Jianping Fang ◽  
Tao Li

Author(s):  
Sumon Modak ◽  
Taimoor Khan

Abstract This study presents a novel configuration of a cuboidal quad-port ultra-wideband multiple-input and multiple-output antenna with WLAN rejection characteristics. The designed antenna consists of four F-shaped elements backed by a partial ground plane. A 50 Ω microstrip line is used to feed the proposed structure. The geometry of the suggested antenna exhibits an overall size of 23 × 23 × 19 mm3, and the antenna produces an operational bandwidth of 7.6 GHz (3.1–10.7 GHz). The notched band characteristic at 5.4 GHz is accomplished by loading a pair of spiral electromagnetic bandgap structures over the ground plane. Besides this, other diversity features such as envelope correlation coefficient, and diversity gain are also evaluated. Furthermore, the proposed antenna system provides an isolation of −15 dB without using any decoupling structure. Therefore, to validate the reported design, a prototype is fabricated and characterized. The overall simulated performance is observed in very close agreement with it's measured counterpart.


2021 ◽  
Vol 11 (5) ◽  
pp. 2382
Author(s):  
Rongguo Song ◽  
Xiaoxiao Chen ◽  
Shaoqiu Jiang ◽  
Zelong Hu ◽  
Tianye Liu ◽  
...  

With the development of 5G, Internet of Things, and smart home technologies, miniaturized and compact multi-antenna systems and multiple-input multiple-output (MIMO) antenna arrays have attracted increasing attention. Reducing the coupling between antenna elements is essential to improving the performance of such MIMO antenna system. In this work, we proposed a graphene-assembled, as an alternative material rather than metal, film-based MIMO antenna array with high isolation for 5G application. The isolation of the antenna element is improved by a graphene assembly film (GAF) frequency selective surface and isolation strip. It is shown that the GAF antenna element operated at 3.5 GHz has the realized gain of 2.87 dBi. The addition of the decoupling structure improves the isolation of the MIMO antenna array to more than 10 dB and corrects the antenna radiation pattern and operating frequency. The isolation between antenna elements with an interval of 0.4λ is above 25 dB. All experimental results show that the GAF antenna and decoupling structure are efficient devices for 5G mobile communication.


Author(s):  
Hassan Tariq Chattha ◽  
Muhammad Kamran Ishfaq ◽  
Bilal A. Khawaja ◽  
Abubakar Sharif ◽  
Nathirulla Sheriff
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document