Cuboidal quad-port UWB-MIMO antenna with WLAN rejection using spiral EBG structures

2021 ◽  
pp. 1-8
Author(s):  
Sumon Modak ◽  
Taimoor Khan
Keyword(s):  
Close Agreement ◽  
Ground Plane ◽  
Antenna System ◽  
Ultra Wideband ◽  
Electromagnetic Bandgap ◽  
Mimo Antenna ◽  
Simulated Performance ◽  
Notched Band ◽  
Multiple Input ◽  
Band Characteristic

Abstract This study presents a novel configuration of a cuboidal quad-port ultra-wideband multiple-input and multiple-output antenna with WLAN rejection characteristics. The designed antenna consists of four F-shaped elements backed by a partial ground plane. A 50 Ω microstrip line is used to feed the proposed structure. The geometry of the suggested antenna exhibits an overall size of 23 × 23 × 19 mm3, and the antenna produces an operational bandwidth of 7.6 GHz (3.1–10.7 GHz). The notched band characteristic at 5.4 GHz is accomplished by loading a pair of spiral electromagnetic bandgap structures over the ground plane. Besides this, other diversity features such as envelope correlation coefficient, and diversity gain are also evaluated. Furthermore, the proposed antenna system provides an isolation of −15 dB without using any decoupling structure. Therefore, to validate the reported design, a prototype is fabricated and characterized. The overall simulated performance is observed in very close agreement with it's measured counterpart.

scholarly journals Design of Band-Notched MIMO Antenna for UWB Applications

2021 ◽  
pp. 1-7
Author(s):  
Ahmed Shaker ◽  
◽  
Ayman Haggag
Keyword(s):  
Return Loss ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Total Size ◽  
Mimo Antenna ◽  
Notched Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications

A compact ultra-wideband (UWB) Multiple-Input-Multiple-Output (MIMO) antenna with a notched band is presented. The proposed design consists of four unipolar UWB radiators, and these monopole radiators are placed perpendicular to each other to exploit polarization diversity, where the four-element ultra-wideband (UWB) Multiple-Input-Multiple-Output (MIMO) antenna is presented. The total size of the antenna is 60x60 mm2. The operating frequency of the antenna is 3.1–11 GHz with a return loss of less than 10 dB, except at the notched band of 4.9– 5.9 GHz. This antenna consists of an isosceles trapezoidal plate with a circular notch cut and two transitional steps as well as a partial ground plane. For UWB bandwidth enhancement techniques: use of a partial ground plane, and modify the gap between the radioactive element and ground plane technique, using steps to control the resistance stability and a notch cut technique. The notch cut from the radiator is too used to reduce the size of the plane antenna. The measured -10 dB return loss bandwidth for the designed antenna is about 116.3% (8.7 GHz). The MIMO antenna does not require any additional structure to improve insulation. The proposed antenna supplies an acceptable radiation pattern and relatively flat gain over the entire frequency band.

A Compact Printed UWB MIMO Antenna with Electronically Reconfigurable WLAN Band-Notched Characteristics

2021 ◽  
pp. 2250045
Author(s):  
Hicham Medkour ◽  
Soufian lakrit ◽  
Sudipta Das ◽  
B. T. P. Madhav ◽  
K. VasuBabu
Keyword(s):  
Ground Plane ◽  
Antenna System ◽  
Ultra Wideband ◽  
Performance Parameters ◽  
Pin Diodes ◽  
Mimo Antenna ◽  
Notch Band ◽  
Notched Band ◽  
Negative Effect ◽  
Uwb Applications

In this research paper, a simple design of an ultra-wideband (UWB) multi-input multi-output (MIMO) antenna with low envelope correlation coefficient (ECC), high isolation, enhanced gain, radiation efficiency and reconfigurable band notching functionality is proposed. Two symmetrical slots are carefully integrated into the partial ground plane of the conventional monopole to provide a notched band at 5.8[Formula: see text]GHz for the WLAN system. This notching method is simple and does not endure negative effect performance or any design complexity. The notched band is then controlled using PIN diodes. A complete biasing circuit is integrated on the same partial ground plane to bias the PIN diodes in forward and reverse directions. To reduce the complexity of the design that may be increased due to the reconfiguration circuit, isolation enhancement is accomplished by orthogonal placement of the elements rather than using any additional decoupling structures. A prototype of the MIMO UWB structure is fabricated and its performance parameters are experimentally tested. The captivating agreement between simulation and measurement demonstrates that the proposed antenna system is a good candidate for UWB applications with an operating band extending from 3 to 11[Formula: see text]GHz, notch-band reconfiguration freedom, and isolation of more than 20[Formula: see text]dB.

scholarly journals Realizing UWB Antenna Array with Dual and Wide Rejection Bands Using Metamaterial and Electromagnetic Bandgaps Techniques

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 269
Author(s):  
Ayman A. Althuwayb ◽  
Mohammad Alibakhshikenari ◽  
Bal S. Virdee ◽  
Pancham Shukla ◽  
Ernesto Limiti
Keyword(s):  
Antenna Array ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Dual Band ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
Uwb Antenna ◽  
Average Gain ◽  
Left Handed ◽  
Notched Band

This research article describes a technique for realizing wideband dual notched functionality in an ultra-wideband (UWB) antenna array based on metamaterial and electromagnetic bandgap (EBG) techniques. For comparison purposes, a reference antenna array was initially designed comprising hexagonal patches that are interconnected to each other. The array was fabricated on standard FR-4 substrate with thickness of 0.8 mm. The reference antenna exhibited an average gain of 1.5 dBi across 5.25–10.1 GHz. To improve the array’s impedance bandwidth for application in UWB systems metamaterial (MTM) characteristics were applied it. This involved embedding hexagonal slots in patch and shorting the patch to the ground-plane with metallic via. This essentially transformed the antenna to a composite right/left-handed structure that behaved like series left-handed capacitance and shunt left-handed inductance. The proposed MTM antenna array now operated over a much wider frequency range (2–12 GHz) with average gain of 5 dBi. Notched band functionality was incorporated in the proposed array to eliminate unwanted interference signals from other wireless communications systems that coexist inside the UWB spectrum. This was achieved by introducing electromagnetic bandgap in the array by etching circular slots on the ground-plane that are aligned underneath each patch and interconnecting microstrip-line in the array. The proposed techniques had no effect on the dimensions of the antenna array (20 mm × 20 mm × 0.87 mm). The results presented confirm dual-band rejection at the wireless local area network (WLAN) band (5.15–5.825 GHz) and X-band satellite downlink communication band (7.10–7.76 GHz). Compared to other dual notched band designs previously published the footprint of the proposed technique is smaller and its rejection notches completely cover the bandwidth of interfering signals.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

scholarly journals Quad-Port Multiservice Diversity Antenna for Automotive Applications

Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8238
Author(s):  
Lekha Kannappan ◽  
Sandeep Kumar Palaniswamy ◽  
Lulu Wang ◽  
Malathi Kanagasabai ◽  
Sachin Kumar ◽  
...  
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Intelligent Transport System ◽  
Automotive Applications ◽  
Mimo Antenna ◽  
Intelligent Transport ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Toll Collection

A quad-element multiple-input-multiple-output (MIMO) antenna with ultra-wideband (UWB) performance is presented in this paper. The MIMO antenna consists of four orthogonally arranged microstrip line-fed hexagonal monopole radiators and a modified ground plane. In addition, E-shaped and G-shaped stubs are added to the radiator to achieve additional resonances at 1.5 GHz and 2.45 GHz. The reliability of the antenna in the automotive environment is investigated, with housing effects taken into account. The housing effects show that the antenna performs consistently even in the presence of a large metal object. The proposed MIMO antenna has potential for various automotive applications, including vehicle-to-vehicle (V2V), vehicle-to-infrastructure (V2I), vehicle-to-everything (V2X), intelligent transport system (ITS), automatic vehicle identifier, and RFID-based electronic toll collection.

A miniaturized UWB-MIMO antenna with quadruple band-notched characteristics

2018 ◽  
Vol 10 (8) ◽  
pp. 948-955 ◽  
Author(s):  
Ling Wu ◽  
Yingqing Xia ◽  
Xia Cao ◽  
Zhengtao Xu
Keyword(s):  
Frequency Band ◽  
Satellite Communication ◽  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications

AbstractA simple multiple-input-multiple-output (MIMO) antenna with quad-band-notched characteristics for ultra-wideband (UWB) system is proposed and tested in the article. Based on two similar radiators, the UWB-MIMO system only occupies 22 mm × 28 mm. By etching an inverted L-like meander slot, two inverted L-shaped slots, and adding a C-shaped stub beside the feeding line, four notched bands are realized (3.25–3.6, 5.05–5.48, 5.6–6, and 7.8–8.4 GHz) to suppress interference from WiMAX, lower WLAN, upper WLAN, and uplink of X-band satellite communication system. With a T-like stub extruding from the ground plane, port isolation is effectively improved. The results show that the antenna covers 3.1–10.6 GHz UWB frequency band except four rejected bands and has high isolation of better than −20 dB over most of the frequency band. Moreover, envelope correlation coefficient and good radiation patterns also prove that the introduced antenna is suitable for UWB applications.

scholarly journals Compact Design of 2 × 2 MIMO Antenna with Super-Wide Bandwidth for Millimeters Wavelength Systems

Symmetry ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 233
Author(s):  
Haitham Alsaif ◽  
Mohamed A. H. Eleiwa
Keyword(s):  
Radiation Pattern ◽  
Radio Frequency Identification ◽  
Computer Aided Design ◽  
Ground Plane ◽  
Antenna System ◽  
Ultra Wideband ◽  
Tangent Loss ◽  
Total System ◽  
Wide Bandwidth ◽  
Mimo Antenna

A novel compact planar 2 × 2 antenna system with super-wide bandwidth is presented in this paper. The MIMO antenna has four square-shaped patches with two slots in each that are interconnected with each other using four strip lines printed on a substrate of Rogers Duroid RT 5880 with relative permittivity of εr = 2.2 and tangent loss of δ = 0.0009. The proposed antenna system has a partial ground plane with two enhancement fractured slots. The design is characterized by a super-wide impedance starting from 15.2 to 62 GHz (a bandwidth of 46.8 GHz) and compact total system size of 11.2 × 15.25 mm2 with a thickness of 0.12 mm. The proposed MIMO design has omnidirectional radiation pattern for far field and the achieved peak gain reaches 13.5 dBi. The presented planar antenna which relies on computer aided design, has been designed and simulated using an industrial standard simulation code. Its performance results showed that the MIMO design is characterized by super wide bandwidth, omnidirectional radiation pattern, and high-power gain with miniaturized physical size; thus, it is suitable for radio-frequency identification (RFID) systems, fifth-generation applications, ultra-wideband systems, and others.

Compact Dualband Mimo Antenna for Wireless Communication

2021 ◽  
Author(s):  
Vijetha Tummala ◽  
D Ramakrishna ◽  
R Karthik
Keyword(s):  
Mutual Coupling ◽  
Ground Plane ◽  
Circular Ring ◽  
Antenna System ◽  
Dual Band ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Multiple Input ◽  
Constant E ◽  
Communications System

Abstract A compact dual band two element planar multiple input and multiple output (MIMO) antenna system is designed for Wireless applications. The Proposed design consists of two printed F shape slot radiators which are arranged symmetrically on the upper layer of the substrate. A patch with I shaped strip on the ground plane helps in reducing the mutual coupling between radiators and A circular ring slot is placed in ground plane to improve the bandwidth of antenna. The proposed module is designed on Fr-4 substrate whose dielectric constant (ɛr) is 4.4. The results show that the MIMO antenna has a resonance frequency at 2.2GHz, which is suitable for Wireless communications system applications and comes with a mutual coupling(s12) less than − 15 dB and the envelop correlation coefficient (ECC) did not exceed 0.02 in the entire operating band of the MIMO antenna part.

Dual-band-notched antenna for UWB MIMO applications

2015 ◽  
Vol 9 (2) ◽  
pp. 381-386 ◽  
Author(s):  
Zamir Wani ◽  
Dinesh Kumar
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Split Ring Resonator ◽  
Antenna System ◽  
Ultra Wideband ◽  
Dual Band ◽  
Compact Antenna ◽  
Complementary Split Ring Resonator ◽  
Multiple Input ◽  
Input Multiple Output

In this report, a compact antenna system with dual-band-notched characteristics is proposed for ultra-wideband (UWB) multiple-input multiple-output (MIMO) applications. Two antenna elements are placed side by side and fed with matched microstrip lines on a substrate with an area of 35 × 30 mm2. Notched characteristics at WiMAX (3.4–3.6 GHz) and WLAN (5.725–5.825 GHz) have been achieved using complementary split ring resonator (SRR) slots etched in both the antenna elements. Electromagnetic isolation between the two elements close to each other is achieved using a ground T-stub and slots etched in the ground plane. Antenna system has been tested and measured results are close to the desired ones. Measured isolation >20 dB is obtained in most of the UWB bands. The proposed antenna system meets the requirements well for MIMO applications.

scholarly journals Design of Quad-Port Ultra-Wideband Multiple-Input-Multiple-Output Antenna with Wide Axial-Ratio Bandwidth

Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 1174 ◽  
Author(s):  
Pawan Kumar ◽  
Shabana Urooj ◽  
Areej Malibari
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Axial Ratio ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Good Agreement

This article presents a compact, planar, quad-port ultra-wideband (UWB) multiple-input–multiple-output (MIMO) antenna with wide axial ratio bandwidth (ARBW). The proposed MIMO design consists of four identical square-shaped antenna elements, where each element is made up of a circular slotted ground plane and feed by a 50 Ω microstrip line. The circular polarization is achieved using a protruding hexagonal stub from the ground plane. The four elements of the MIMO antenna are placed orthogonally to each other to obtain high inter-element isolation. FR-4 dielectric substrate of size 45 × 45 × 1.6 mm3 is used for the antenna prototype, and a good agreement is noticed among the simulated and experimental results. The proposed MIMO antenna shows 3-dB ARBW of 52% (3.8–6.5 GHz) and impedance bandwidth (S11 ≤ −10 dB) of 144% (2.2–13.5 GHz).

Sign in / Sign up

Export Citation Format

Share Document