High Precision Position Control of Telescope Servo Systems Based on Active Disturbance Rejection Controller

Author(s):  
Xin Li ◽  
Wenlin Zhou ◽  
Jun Luo ◽  
Junzhang Qian ◽  
Wenli Ma
Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6124
Author(s):  
Lixin Wang ◽  
Dingxuan Zhao ◽  
Fucai Liu ◽  
Qian Liu ◽  
Zhuxin Zhang

In this paper, an integrated control strategy of position synchronization control for dual-electro-hydraulic actuators with unknown dead-zones is proposed. The unified control scheme consists of two parts: One is adaptive dead-zone inverse controllers of each hydraulic actuator to offset the unknown dead-zones. The other is the linear active disturbance rejection controller (LADRC) for position synchronization error. First, the model of the electro-hydraulic proportional position control system (EPPS) was identified by the forgetting factor recursive least square (FFRLS) algorithm. Next, the model reference dead-zone inverse adaptive controller (MRDIAC) was developed to compensate for the delay of actuator response caused by unknown proportional valve dead-zones. Meanwhile, the validity of the adaptive law was proven by the Lyapunov theory. Therefore, the position control accuracy of each hydraulic actuator is guaranteed. Besides, to improve the precision of position synchronization control of dual-hydraulic actuators, a simple and elegant synchronous error-based LADRC was adopted, which applies the total disturbances design concept to eliminate and compensate for motion coupling rather than cross-coupling technology. The performance of the proposed control solution was investigated through extensive comparative experiments based on a hydraulic test platform. The experimental results successfully demonstrate the effectiveness and practicality of the proposed method.


Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Wenxiao Guo ◽  
Yanbin Zhao ◽  
Ruiqin Li ◽  
Haigang Ding ◽  
Jianwei Zhang

The valve-controlled cylinder position servo system has the advantages of large output force and large power. As characteristics of nonlinearity and uncertainty exist in the hydraulic servo system, it is difficult for the traditional PID control to meet the requirements of high precision and control. The active disturbance rejection control (ADRC) considers the uncertainty of the system and external disturbances as the total disturbance. In this paper, the valve-controlled cylinder servo system is designed based on ADRC, its working principle is described, and its mathematical model and cosimulation model based on MATLAB-AMESim are established. In the case of constant load, variable load, and long pipeline, the comparative simulation of ADRC and PID is carried out. The simulation results show that the ADRC can effectively suppress the disturbance of the internal parameter changes and external load changes of the hydraulic system and has strong robustness and high control accuracy. This study provides a reference for the application of ADRC in electrohydraulic servo systems.


Sign in / Sign up

Export Citation Format

Share Document