scholarly journals Investigation of Experimental and Statistical (Respond Surface Method and Grey Relational Analysis) of Surface Roughness, Vibration and Enerrgy consumption Values of Titanium Alloy During Machining

2021 ◽  
Vol 0 (0) ◽  
pp. 0-0
Author(s):  
Harun Akkus
Keyword(s):  
Surface Roughness ◽  
Titanium Alloy ◽  
Grey Relational Analysis ◽  
Relational Analysis ◽  
Consumption Values ◽  
Surface Method ◽  
Grey Relational

Performance analysis of process parameters on machining α–β titanium alloy in electrochemical micromachining process

2016 ◽  
Vol 232 (9) ◽  
pp. 1577-1589 ◽  
Author(s):  
T Geethapriyan ◽  
K Kalaichelvan ◽  
T Muthuramalingam ◽  
A Rajadurai
Keyword(s):  
Surface Roughness ◽  
Titanium Alloy ◽  
Grey Relational Analysis ◽  
Material Removal ◽  
Electrolyte Concentration ◽  
Removal Rate ◽  
Electrochemical Micromachining ◽  
Relational Analysis ◽  
Micro Tool ◽  
Grey Relational

Due to inherent properties of Ti-6Al-4V alloy, it is being used in the application of fuel injector nozzle for diesel engine, aerospace and marine industries. Since the electrochemical micromachining process involves the no heat-affected zone, no tool wear, stress- and burr-free process compared to other micromachining processes, it is widely used in the manufacturing field to fabricate complex shape and die. Hence, it is highly important to compute the optimum input parameters for enhancing the machining characteristics in such machining process. In this study, an attempt has been made to find the influence of the process parameters and optimize the parameters on machining α–β titanium alloy using Taguchi-grey relational analysis. Since applied voltage, micro-tool feed rate, electrolyte concentration and duty cycle have vital role in the process, these parameters have been chosen as the input parameters to evaluate the performance measures such as material removal rate, surface roughness and overcut in this study. From the experimental results, it has been found that micro-tool feed rate has more influence due to its importance in maintaining inter electrode gap to avoid micro-spark generation. It has also been found that lower electrolyte concentration with lower duty cycle produces lower surface roughness with better circularity on machining α–β titanium alloy. The optimum combination has been found using Taguchi-grey relational analysis and verified from confirmation test. It has also been inferred that the multi-response characteristics such as material removal rate, surface roughness and overcut can be effectively improved through the grey relational analysis.

scholarly journals Analysis and optimization of laser drilling process during machining of AISI 303 material using grey relational analysis approach

2021 ◽  
Vol 3 (3) ◽  
Author(s):  
V. Chengal Reddy ◽  
Thota Keerthi ◽  
T. Nishkala ◽  
G. Maruthi Prasad Yadav
Keyword(s):  
Surface Roughness ◽  
Process Parameters ◽  
Grey Relational Analysis ◽  
Pulse Frequency ◽  
Laser Drilling ◽  
Simultaneous Optimization ◽  
Fibre Laser ◽  
Drilling Process ◽  
Relational Analysis ◽  
Grey Relational

AbstractSurface roughness and heat-affected zone (HAZ) are the important features which influence the performance of the laser-drilled products. Understanding the influence of laser process parameters on these responses and identifying the cutting conditions for simultaneous optimization of these responses are a primary requirement in order to improve the laser drilling performance. Nevertheless, no such contribution has been made in the literature during laser drilling of AISI 303 material. The aim of the present work is to optimize the surface roughness (Ra) and HAZ in fibre laser drilling of AISI 303 material using Taguchi-based grey relational analysis (GRA). From the GRA methodology, the recommended optimum combination of process parameters is flushing pressure at 30 Pa, laser power at 2000 W and pulse frequency at 1500 Hz for simultaneous optimization of Ra and HAZ, respectively. From analysis of variance, the pulse frequency is identified as the most influenced process parameters on laser drilling process performance.

Multi-Response Optimization of Wire-EDM Process Parameters of Titanium Alloy Using Taguchi Method and Grey Relational Analysis

2015 ◽  
Vol 772 ◽  
pp. 245-249
Author(s):  
A. Ramamurthy ◽  
R. Sivaramakrishnan ◽  
S. Venugopal ◽  
T. Muthuramalingam
Keyword(s):  
Titanium Alloy ◽  
Process Parameters ◽  
Grey Relational Analysis ◽  
Wire Edm ◽  
Relational Analysis ◽  
Response Optimization ◽  
Grey Relational ◽  
Pulse On Time ◽  
Pulse Off Time ◽  
Edm Process

It is very important and complexity to find the optimum values of wire EDM process parameters and contribution of each parameter to attain the better performance characteristics. In this study, an attempt has been made to optimize those parameters while machining the titanium alloy. Since the process involves more one than one response parameter, it is essential to carry out the multi-response optimization methodology .The experiments have been conducted with different levels of input factors such as pulse on time,pulse off time and wire tension based on Taguchi L9 orthogonal table.Wire EDM optimal process parameter has been identified using grey relational analysis and significant parameter has been determined by analysis of variance. Experimental results have indicated that the multi-response characteristic such as material removal rate and surface roughness can be improved effectively through grey relational analysis.

scholarly journals Multi-objective Optimization of Titanium Alloy through Orthogonal Array and Grey Relational Analysis in WEDM

2014 ◽  
Vol 15 ◽  
pp. 832-840 ◽  
Author(s):  
J.B. Saedon ◽  
Norkamal Jaafar ◽  
Mohd Azman Yahaya ◽  
NorHayati Saad ◽  
Mohd Shahir Kasim
Keyword(s):  
Titanium Alloy ◽  
Grey Relational Analysis ◽  
Orthogonal Array ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Relational Analysis ◽  
Grey Relational

EXPERIMENTAL INVESTIGATION OF COCONUT OIL WITH NANOBORIC ACID DURING MILLING OF INCONEL 625 USING TAGUCHI-GREY RELATIONAL ANALYSIS

2020 ◽  
pp. 2150008
Author(s):  
T. MOHANRAJ ◽  
P. RAGAV ◽  
E. S. GOKUL ◽  
P. SENTHIL ◽  
K. S. RAGHUL ANANDH
Keyword(s):  
Surface Roughness ◽  
Grey Relational Analysis ◽  
Flank Wear ◽  
Coconut Oil ◽  
Inconel 625 ◽  
Depth Of Cut ◽  
Individual Response ◽  
Relational Analysis ◽  
Grey Relational ◽  
Taguchi’S Design Of Experiments

This study is based on Taguchi’s design of experiments along with grey relational analysis (GRA) to optimize the milling parameters to minimize surface roughness, tool wear, and vibration during machining of Inconel-625 while using coconut oil as cutting fluid (CF). The experiments were conducted based on Taguchi’s L9 orthogonal array (OA). Taguchi’s S/N was used for identifying the optimal cutting parameter for individual response. Analysis of variance (ANOVA) was employed to analyze the outcome of individual parameters on responses. The surface roughness was mostly influenced by feed. Flank wear was influenced by speed and the vibration was mostly influenced by the depth of cut as well as speed. The multi-response optimization was done through GRA. From GRA, the optimal parameters were identified. Further, nanoboric acid of 0.5 and 0.9[Formula: see text]wt.% was mixed with coconut oil to enhance lubricant properties. Coconut oil with 0.5[Formula: see text]wt.% of nanoboric acid minimizes the surface roughness and flank wear by 3.92% and 6.28% and reduces the vibration in the [Formula: see text]-axis by 4.85%. The coconut oil with 0.5[Formula: see text]wt.% of nanoboric acid performs better than coconut oil with 0.9[Formula: see text]wt.% of nano boric acid and base oil.

scholarly journals Quality Performance Evaluation of Thin Walled PLA 3D Printed Parts Using the Taguchi Method and Grey Relational Analysis

2020 ◽  
Vol 4 (2) ◽  
pp. 47 ◽  
Author(s):  
Kyriaki-Evangelia Aslani ◽  
Dimitrios Chaidas ◽  
John Kechagias ◽  
Panagiotis Kyratsis ◽  
Konstantinos Salonitis
Keyword(s):  
Surface Roughness ◽  
Wall Thickness ◽  
Grey Relational Analysis ◽  
Dimensional Accuracy ◽  
Optimization Techniques ◽  
Extraction Temperature ◽  
Quality Performance ◽  
Relational Analysis ◽  
3D Printed ◽  
Grey Relational

This paper investigates the quality performance of FDM 3D printed models with thin walls. The design of experiments method (DOE) was used and nine models of the same size were fabricated in a low-cost 3D printer using polylactic acid (PLA) material. Two limited studied parameters were considered (extraction temperature and wall thickness), each one having three levels. External X and Y dimensions were measured using a micrometer, as well as four surface roughness parameters (Ra, Rz, Rt, Rsm) with a surface tester. Two optimization techniques (the Taguchi approach and Grey relational analysis) were utilized along with statistical analysis to examine how the temperature and wall thickness affect the dimensional accuracy and the surface quality of the parts. The results showed that high extraction temperature and median wall thickness values optimize both dimensional accuracy and surface roughness, while temperature is the most important factor.

scholarly journals Optimum combination of process parameters to optimize Surface Roughness and Chip Thickness during End Milling of Aluminium 6351-T6 Alloy Using Taguchi Grey Relational Analysis

2017 ◽  
Vol 8 (2) ◽  
pp. 287
Author(s):  
Reddy Sreenivasulu
Keyword(s):  
Surface Roughness ◽  
Grey Relational Analysis ◽  
Feed Rate ◽  
End Milling ◽  
Chip Thickness ◽  
Optimum Combination ◽  
Spindle Speed ◽  
Depth Of Cut ◽  
Relational Analysis ◽  
Grey Relational

In any machining operations, quality is the important conflicting objective. In order to give assurance for high productivity, some extent of quality has to be compromised. Similarly productivity will be decreased while the efforts are channelized to enhance quality. In this study,  the experiments were carried out on a CNC vertical machining center (KENT and INDIA Co. Ltd, Taiwan make) to perform 10mm slots on Al 6351-T6 alloy work piece by K10 carbide, four flute end milling cutter as per taguchi design of experiments plan by L9 orthogonal array was choosen to determine experimental trials. Furthermore the spindle speed (rpm), the feed rate (mm/min) and depth of cut (mm) are regulated in these experiments. Surface roughness and chip thickness was measured by a surface analyser of Surf Test-211 series (Mitutoyo) and Digital Micrometer (Mitutoyo) with least count 0.001 mm respectively. Grey relational analysis was employed to minimize surface roughness and chip thickness by setting of optimum combination of machining parameters. Minimum surface roughness and chip thickness obtained with 1000 rpm of spindle speed, 50 mm/min feed rate and 0.7 mm depth of cut respectively. Confirmation experiments showed that Gray relational analysis precisely optimized the drilling parameters in drilling of Al 6351-T6 alloy. 

Sign in / Sign up

Export Citation Format

Share Document