scholarly journals On the Development of SCILAB Compatible Software for the Analysis and Control of Repetitive Processes

Author(s):  
Łukasz Hładowski ◽  
Błażej Cichy ◽  
Krzysztof Gałkowski ◽  
Eric Rogers

On the Development of SCILAB Compatible Software for the Analysis and Control of Repetitive ProcessesIn this paper further results on the development of a Scilab compatible software package for the analysis and control of repetitive processes is described. The core of the package consists of a simulation tool which enables the user to inspect the response of a given example to an input, design a control law for stability and/or performance, and also simulate the response of a controlled process to a specified reference signal.

Author(s):  
Scott Campbell ◽  
David R. Latulippe

The integration of software packages intochemical engineering courses is widely regarded tobenefit students in two ways. First, the active learningenvironment encourages a deep understanding of thecourse material. Second, it gives students practicalexperience with ‘state of the art’ tools that are used inindustry. However, surveys of chemical engineeringprograms have shown that the use of software packagesinto traditional fluid mechanics courses is quite low (lessthan 10%). Recently, the software package PIPE-FLO(from Engineered Software Inc.) was integrated into thesecond-year fluid mechanics course (ChE 2O04) atMcMaster. The software performs a full hydraulicnetwork analysis for a variety of piping configurationswith numerous piping components such as pumps,compressors, and control valves. The implementation ofPIPE-FLO as a simulation tool is in accordance with therecent initiative by the Canadian EngineeringAccreditation Board (CEAB) to determine directions forprogram improvement. A set of ten self-guided tutorialswere prepared to teach the students how to use the fullprofessional version of PIPE-FLO that was available inthe campus computer labs. Each tutorial was developedto enhance the understanding of the theory learned inclass and included references to the appropriateequations from the course textbook. Feedback from thestudents was overwhelmingly positive and encouragedgreater integration of the software into future offerings ofthe course.


1996 ◽  
Vol 51 (11-12) ◽  
pp. 833-840 ◽  
Author(s):  
P He ◽  
A Radunz ◽  
K. P Bader ◽  
G. H Schmid

Abstract Leaf lipids of Aleurites plants that were cultivated for 5 months in air containing 700 ppm CO2, were compared to those of control plants cultivated at 350 ppm CO2. The content of ether soluble lipids referred to dry matter is the same in CO2-and control plants. The comparison of lipids analyzed as the pigments chlorophyll and carotenoids, phospholipids and glycolipids shows that the ratio of phospholipids and glycolipids is slightly shifted in favor of phospholipids in CO2-plants. Thus, within the group of phospholipids, phosphatidylglycerol and phosphatidylinositol occur in higher concentrations in CO2-plants. Although the differences in the lipid content appear moderate in CO2-and control plants, it is the saturation degree of fatty acids that differs substantially. The fatty acids of CO2-plants contain according to the higher phospholipid content approx. 5% more saturated fatty acids. Stearic acid is three-fold increased. Whereas in the phospholipid fraction saturated fatty acids comprise one half of all fatty acids, the unsaturated fatty acids make up for 80 to 90% in the glycolipid fraction. In CO2-plants not only in the phospholipid fraction but also in the glycolipid fraction saturated fatty acids occur in a higher portion. This means that not only in the cell membrane of CO2-plants but also in the thylakoid membrane the fluidity is decreased. Also in the wax-fraction long-chained carbonic acids with 20 -26 carbon atoms occur. As the portion of these carbonic acids is twice as high in CO2-plants, it is concluded that a stronger formation of the wax layers exists in CO2-plants. By means of Western blotting and by the use of lipid and carotenoid antisera the binding of lipids onto proteins of photosystem II and photosystem I was analyzed. It is seen that besides the major amount of lipids which build up the thylakoid membrane, some lipids are also bound to membrane peptides. Whereas monogalactolipid is bound to the LHCP-complex peptides, to the OEC1 -peptide and the 43 and 47 kDa chlorophyll binding peptides, the anionic lipids sulfoquinovosyldiglyceride and phosphatidylglycerol and digalactolipid are bound to the core peptides of PS II and PS I. β-carotene and the xanthophylls were found to be bound to the core peptides and β-carotene and violaxanthin were also bound to the light-harvesting pigment complex.


2012 ◽  
Vol 490-495 ◽  
pp. 594-597
Author(s):  
Cheng Qun Li ◽  
Liang Gao

This paper introduces a new type of automatic steel bundling machine for bundling process, which includes a pneumatic action process, mainly do some researches on the pneumatic control system. The system chooses PLC as the core control component, puts forward the hardware of control system and control flow. Eventually we have been designed the control program.


2021 ◽  
Vol 11 (23) ◽  
pp. 11319
Author(s):  
Hyun Woo Won

The performance of hybrid electric vehicles (HEVs) greatly depends on the various sub-system components and their architecture, and designers need comprehensive reviews of HEVs before vehicle investigation and manufacturing. Simulations facilitate development of virtual prototypes that make it possible to rapidly see the effects of design modifications, avoiding the need to manufacture multiple expensive physical prototypes. To achieve the required levels of emissions and hardware costs, designers must use control strategies and tools such as computational modeling and optimization. However, most hybrid simulation tools do not share their principles and control logic algorithms in the open literature. With this motivation, the author developed a hybrid simulation tool with a rule-based topology. The major advantage of this tool is enhanced flexibility to choose different control and energy management strategies, enabling the user to explore a wide range of hybrid topologies. The tool provides the user with the ability to modify any sub-system according to one’s own requirements. In addition, the author introduces a simple logic control for a rule-base strategy as an example to show the flexibility of the tool in allowing the adaptation of any logic algorithm by the user. The results match the experimental data quite well. Details regarding modeling principle and control logic are provided for the user’s benefit.


Sign in / Sign up

Export Citation Format

Share Document