scholarly journals Synergetic Concept of Algorithms Autonomous Inertial Navigation Systems

2012 ◽  
Vol 19 (2) ◽  
pp. 185-197
Author(s):  
Sergey Yakushin

Abstract Errors of INS output parameters lead to a positive feedback effect of errors and eventually to an even more dramatic increase in system errors. To reduce the impact of this problem on the error output parameters of INS, in this paper, we propose and study a new concept of constructing algorithms for autonomous INS, which is called as synergetic concept. In the paper the synergetic concept of inertial system’s algorithm is presented and investigated by implementing its into strapdown inertial navigation system (SDINS).

1960 ◽  
Vol 13 (3) ◽  
pp. 301-315
Author(s):  
Richard B. Seeley ◽  
Roy Dale Cole

This paper describes and discusses some of the techniques by which a moving inertial platform may be aligned by using external velocity measurements and also presents some of the major problems and error sources affecting such alignment. It is based upon the results of a 3-year study, of inertial and doppler-inertial navigation at the Naval Ordnance Test Station, China Lake, California, and, in general, applies to inertial navigation systems which erect to either the local level or the mass-attraction vertical. Although rudimentary derivations are made of the alignment techniques, the paper is largely nonmathematical for ease of reading. Emphasis is placed upon the major errors affecting the alignment. This paper describes and discusses some of the techniques by which a moving inertial platform may be aligned by using external velocity measurements and also presents some of the major problems and error sources affecting such alignment. It is based upon the results of a 3-year study, of inertial and doppler-inertial navigation at the Naval Ordnance Test Station, China Lake, California, and, in general, applies to inertial navigation systems which erect to either the local level or the mass-attraction vertical. Although rudimentary derivations are made of the alignment techniques, the paper is largely nonmathematical for ease of reading. Emphasis is placed upon the major errors affecting the alignment.


2020 ◽  
Vol 28 (4) ◽  
pp. 3-15
Author(s):  
V.G. Peshekhonov ◽  
◽  

The paper addresses the systematic error of an inertial navigation system, caused by the discrepancy between the plumb line and the normal to the reference ellipsoid surface. The methods of this discrepancy estimation, and their use for correcting the output data of inertial navigation systems are studied.


2013 ◽  
Vol 66 (5) ◽  
pp. 751-772 ◽  
Author(s):  
Xueyun Wang ◽  
Jie Wu ◽  
Tao Xu ◽  
Wei Wang

Inertial Navigation Systems (INS) were large, heavy and expensive until the development of cost-effective inertial sensors constructed with Micro-electro-mechanical systems (MEMS). However, the large errors and poor error repeatability of MEMS sensors make them inadequate for application in many situations even with frequent calibration. To solve this problem, a systematic error auto-compensation method, Rotation Modulation (RM) is introduced and detailed. RM does no damage to autonomy, which is one of the most important characteristics of an INS. In this paper, the RM effects on navigation performance are analysed and different forms of rotation schemes are discussed. A MEMS-based INS with the RM technique applied is developed and specific calibrations related to rotation are investigated. Experiments on the developed system are conducted and results verify that RM can significantly improve navigation performance of MEMS-based INS. The attitude accuracy is improved by a factor of 5, and velocity/position accuracy by a factor of 10.


2018 ◽  
Vol 160 ◽  
pp. 07005
Author(s):  
Lin Wang ◽  
Wenqi Wu ◽  
Guo Wei ◽  
Jinlong Li ◽  
Ruihang Yu

The redundant rotational inertial navigation systems can satisfy not only the high-accuracy but also the high-reliability demands of underwater vehicle on navigation system. However, different systems are usually independent, and lack of information fusion. A reduced-order Kalman filter is designed to fuse the navigation information output of redundant rotational navigation systems which usually include a dual-axis rotational inertial navigation system being master system and a single-axis rotational inertial navigation system being hot-backup system. The azimuth gyro drift of single-axis rotational inertial navigation system can be estimated by the designed filter, whereby the position error caused by that can be compensated with the aid of designed position error prediction model. As a result, the improved performance of single-axis rotational inertial navigation system can guarantee the position accuracy in the case of dual-axis system failure. Semi-physical simulation and experiment verify the effectiveness of the proposed method.


Author(s):  
Sergii Pogorilov ◽  
Valerij Havin

In modern aerospace technology, strapdown inertial navigation systems (SINS) are widely used, using fiber-optic (FOG) or ring laser (CLG) gyroscopes. During the operation of such systems, the sensitivity axes are rotated relative to the basic coordinate system. The resulting angles between the axes of the base coordinate system and the axes of sensitivity of the navigation system (non-orthogonality) are one of the factors leading to an increase in the measurement errors of the device, which affects the measurement accuracy. During operation, the system is affected by vibrations of various nature, the impact of which can contribute to the appearance of non-orthogonality. The purpose of this work is to determine the maximum permissible vibration amplitudes affecting the SINS body according to the permissible values ​​of the deviation of the FOG sensitivity axes for two variants of the SINS layout. An approach to determining the permissible amplitudes of an external harmonic impact on the unit of a strapdown inertial navigation system based on fiber-optic or ring laser gyroscopes is considered. A design scheme, mathematical and finite element models for calculating natural frequencies and forced oscillations of a strapdown inertial navigation system unit have been developed. In various frequency ranges, numerical calculations have determined the boundary values ​​of the amplitudes of the external harmonic impact on the base of specific configurations of the SINS assembly. It has been established that dangerous states take place in the region of the 1st natural frequency of the system, as well as near higher frequencies. Comparison of the results for design options 1 and 2 allows us to conclude that in order to weaken the effect of vibrations on the accuracy of the SINS unit, it is advisable that the lowest natural vibration frequencies for the SINS assembly be as high as possible (more than 1000 Hz). Key words: vibration; fiber optic gyroscope; strapdown inertial navigation system; finite element method; natural frequencies and modes of vibration.


2019 ◽  
Vol 49 (4) ◽  
pp. 491-509
Author(s):  
Andrzej Szelmanowski ◽  
Grzegorz Kowalczyk ◽  
Krzysztof Kubryński ◽  
Piotr Rogala

Abstract The article discusses the characteristics of measuring chains found in the gimbal inertial navigation systems of the IKW-8 type (used on Su-22 aircraft) are presented. The research paper also addresses the method for the identification of measurement chain properties of the gyroscopic KW-1 platform developed at AFIT, including sensors for the parameters of aircraft motion within an inertial space (linear accelerations and angular velocities) and signal processing systems (used to level and gyrocompass the platform). The methodology for the identification of measurement chain properties developed at AFIT found its application as a complementary technology in the process of assessing the technical condition of an IKW-8 inertial navigation system implemented in the conditions of a military unit operating Su-22 aircraft.


Aviation ◽  
2012 ◽  
Vol 16 (2) ◽  
pp. 33-37 ◽  
Author(s):  
Peter Trifonov-Bogdanov ◽  
Anastasia Zhiravetska ◽  
Tatjana Trifonova-Bogdanova ◽  
Vladimir Shestakov

The processes of error development in an inertial navigation system are analysed. With this aim, the standard structures of error development were extracted in the inertial system. Error development was defined in the standard structures. Error development in the inertial navigation system is concluded according to the results obtained in the work.


2012 ◽  
Vol 245 ◽  
pp. 323-329 ◽  
Author(s):  
Muhammad Ushaq ◽  
Jian Cheng Fang

Inertial navigation systems exhibit position errors that tend to grow with time in an unbounded mode. This degradation is due, in part, to errors in the initialization of the inertial measurement unit and inertial sensor imperfections such as accelerometer biases and gyroscope drifts. Mitigation to this growth and bounding the errors is to update the inertial navigation system periodically with external position (and/or velocity, attitude) fixes. The synergistic effect is obtained through external measurements updating the inertial navigation system using Kalman filter algorithm. It is a natural requirement that the inertial data and data from the external aids be combined in an optimal and efficient manner. In this paper an efficient method for integration of Strapdown Inertia Navigation System (SINS), Global Positioning System (GPS) and Doppler radar is presented using a centralized linear Kalman filter by treating vector measurements with uncorrelated errors as scalars. Two main advantages have been obtained with this improved scheme. First is the reduced computation time as the number of arithmetic computation required for processing a vector as successive scalar measurements is significantly less than the corresponding number of operations for vector measurement processing. Second advantage is the improved numerical accuracy as avoiding matrix inversion in the implementation of covariance equations improves the robustness of the covariance computations against round off errors.


2020 ◽  
Vol 12 (21) ◽  
pp. 3639
Author(s):  
Michal Labowski ◽  
Piotr Kaniewski

Navigation systems used for the motion correction (MOCO) of radar terrain images have several limitations, including the maximum duration of the measurement session, the time duration of the synthetic aperture, and only focusing on minimizing long-term positioning errors of the radar host. To overcome these limitations, a novel, multi-instance inertial navigation system (MINS) has been proposed by the authors. In this approach, the classic inertial navigation system (INS), which works from the beginning to the end of the measurement session, was replaced by short INS instances. The initialization of each INS instance is performed using an INS/GPS system and is triggered by exceeding the positioning error of the currently operating instance. According to this procedure, both INS instances operate simultaneously. The parallel work of the instances is performed until the image line can be calculated using navigation data originating only from the new instance. The described mechanism aims to perform instance switching in a manner that does not disturb the initial phases of echo signals processed in a single aperture. The obtained results indicate that the proposed method improves the imaging quality compared to the methods using the classic INS or the INS/GPS system.


Sign in / Sign up

Export Citation Format

Share Document