scholarly journals Multi-Instance Inertial Navigation System for Radar Terrain Imaging

2020 ◽  
Vol 12 (21) ◽  
pp. 3639
Author(s):  
Michal Labowski ◽  
Piotr Kaniewski
Keyword(s):  
Navigation System ◽  
Inertial Navigation System ◽  
Inertial Navigation ◽  
Navigation Systems ◽  
Time Duration ◽  
Navigation Data ◽  
Positioning Errors ◽  
Measurement Session ◽  
Single Aperture ◽  
Gps System

Navigation systems used for the motion correction (MOCO) of radar terrain images have several limitations, including the maximum duration of the measurement session, the time duration of the synthetic aperture, and only focusing on minimizing long-term positioning errors of the radar host. To overcome these limitations, a novel, multi-instance inertial navigation system (MINS) has been proposed by the authors. In this approach, the classic inertial navigation system (INS), which works from the beginning to the end of the measurement session, was replaced by short INS instances. The initialization of each INS instance is performed using an INS/GPS system and is triggered by exceeding the positioning error of the currently operating instance. According to this procedure, both INS instances operate simultaneously. The parallel work of the instances is performed until the image line can be calculated using navigation data originating only from the new instance. The described mechanism aims to perform instance switching in a manner that does not disturb the initial phases of echo signals processed in a single aperture. The obtained results indicate that the proposed method improves the imaging quality compared to the methods using the classic INS or the INS/GPS system.

An Improved and Efficient Algorithm for SINS/GPS/Doppler Integrated Navigation Systems

2012 ◽  
Vol 245 ◽  
pp. 323-329 ◽  
Author(s):  
Muhammad Ushaq ◽  
Jian Cheng Fang
Keyword(s):  
Kalman Filter ◽  
Navigation System ◽  
Inertial Navigation System ◽  
Inertial Sensor ◽  
Inertial Navigation ◽  
Measurement Unit ◽  
Navigation Systems ◽  
Integrated Navigation ◽  
Efficient Manner ◽  
Position Errors

Inertial navigation systems exhibit position errors that tend to grow with time in an unbounded mode. This degradation is due, in part, to errors in the initialization of the inertial measurement unit and inertial sensor imperfections such as accelerometer biases and gyroscope drifts. Mitigation to this growth and bounding the errors is to update the inertial navigation system periodically with external position (and/or velocity, attitude) fixes. The synergistic effect is obtained through external measurements updating the inertial navigation system using Kalman filter algorithm. It is a natural requirement that the inertial data and data from the external aids be combined in an optimal and efficient manner. In this paper an efficient method for integration of Strapdown Inertia Navigation System (SINS), Global Positioning System (GPS) and Doppler radar is presented using a centralized linear Kalman filter by treating vector measurements with uncorrelated errors as scalars. Two main advantages have been obtained with this improved scheme. First is the reduced computation time as the number of arithmetic computation required for processing a vector as successive scalar measurements is significantly less than the corresponding number of operations for vector measurement processing. Second advantage is the improved numerical accuracy as avoiding matrix inversion in the implementation of covariance equations improves the robustness of the covariance computations against round off errors.

Initial Alignment of a Moving Inertial Navigation System

1960 ◽  
Vol 13 (3) ◽  
pp. 301-315
Author(s):  
Richard B. Seeley ◽  
Roy Dale Cole
Keyword(s):  
Navigation System ◽  
Inertial Navigation System ◽  
Local Level ◽  
Inertial Navigation ◽  
Navigation Systems ◽  
Velocity Measurements ◽  
Initial Alignment ◽  
Inertial Navigation Systems ◽  
Error Sources ◽  
China Lake

This paper describes and discusses some of the techniques by which a moving inertial platform may be aligned by using external velocity measurements and also presents some of the major problems and error sources affecting such alignment. It is based upon the results of a 3-year study, of inertial and doppler-inertial navigation at the Naval Ordnance Test Station, China Lake, California, and, in general, applies to inertial navigation systems which erect to either the local level or the mass-attraction vertical. Although rudimentary derivations are made of the alignment techniques, the paper is largely nonmathematical for ease of reading. Emphasis is placed upon the major errors affecting the alignment. This paper describes and discusses some of the techniques by which a moving inertial platform may be aligned by using external velocity measurements and also presents some of the major problems and error sources affecting such alignment. It is based upon the results of a 3-year study, of inertial and doppler-inertial navigation at the Naval Ordnance Test Station, China Lake, California, and, in general, applies to inertial navigation systems which erect to either the local level or the mass-attraction vertical. Although rudimentary derivations are made of the alignment techniques, the paper is largely nonmathematical for ease of reading. Emphasis is placed upon the major errors affecting the alignment.

Problem of the Vertical Deflection in High-Precision Inertial Navigation

2020 ◽  
Vol 28 (4) ◽  
pp. 3-15
Author(s):  
V.G. Peshekhonov ◽  
◽  
Keyword(s):  
Systematic Error ◽  
High Precision ◽  
Navigation System ◽  
Inertial Navigation System ◽  
Inertial Navigation ◽  
Reference Ellipsoid ◽  
Navigation Systems ◽  
Vertical Deflection ◽  
Inertial Navigation Systems ◽  
Output Data

The paper addresses the systematic error of an inertial navigation system, caused by the discrepancy between the plumb line and the normal to the reference ellipsoid surface. The methods of this discrepancy estimation, and their use for correcting the output data of inertial navigation systems are studied.

An Accuracy Evaluation of a Civil Inertial Navigation System

1967 ◽  
Vol 20 (4) ◽  
pp. 449-463
Author(s):  
P. R. J. Reynolds
Keyword(s):  
Navigation System ◽  
Inertial Navigation System ◽  
Inertial Navigation ◽  
Federal Aviation Administration ◽  
Civil Aviation ◽  
Accuracy Evaluation ◽  
Navigation Systems ◽  
Evaluation Programme ◽  
Primary Object ◽  
Normal Manner

This paper covers the performance of the Sperry SGN-10 Inertial Navigation System as demonstrated by the operation of dual systems installed in a standard operational configuration aboard four jet aircraft of Pan American World Airways incidental to a preoperational engineering evaluation programme conducted for the Federal Aviation Administration during the latter part of 1966. The primary object of this evaluation programme was to determine the system's capability of meeting the following requirements of the F.A.A.'s Advisory Circular covering the use of inertial navigation systems in U.S.- registered civil aircraft, namely:(1) Maintain a position accuracy within 20 n.m. in the across-track dimension and 25 n.m. in the along-track dimension for 95 per cent of the time on flights up to and including ten hours duration.(2) Automatically accomplish initial platform alignment in a normal manner in latitudes up to and including the highest normally used in civil aviation.(3) Perform all its designed navigational functions in a normal manner at all latitudes, inclusive of polar and equatorial overflights.

Enhanced Accuracy Navigation Solutions Realized through SINS/GPS Integrated Navigation System

2013 ◽  
Vol 332 ◽  
pp. 79-85
Author(s):  
Outamazirt Fariz ◽  
Muhammad Ushaq ◽  
Yan Lin ◽  
Fu Li
Keyword(s):  
Kalman Filter ◽  
Navigation System ◽  
Inertial Navigation System ◽  
Inertial Sensor ◽  
Inertial Navigation ◽  
Measurement Unit ◽  
Navigation Systems ◽  
Integrated Navigation ◽  
Position Errors ◽  
Strapdown Inertial Navigation

Strapdown Inertial Navigation Systems (SINS) displays position errors which grow with time in an unbounded manner. This degradation is due to the errors in the initialization of the inertial measurement unit, and inertial sensor imperfections such as accelerometer biases and gyroscope drifts. Improvement to this unbounded growth in errors can be made by updating the inertial navigation system solutions periodically with external position fixes, velocity fixes, attitude fixes or any combination of these fixes. The increased accuracy is obtained through external measurements updating inertial navigation system using Kalman filter algorithm. It is the basic requirement that the inertial data and data from the external aids be combined in an optimal and efficient manner. In this paper an efficient method for integration of Strapdown Inertial Navigation System (SINS), Global Positioning System (GPS) is presented using a centralized linear Kalman filter.

The Design of Vehicle Integrated Navigation System Based on FPGA

2012 ◽  
Vol 442 ◽  
pp. 441-445
Author(s):  
Yong Sen Wei
Keyword(s):  
Navigation System ◽  
Inertial Navigation System ◽  
Inertial Navigation ◽  
Gps Data ◽  
Integrated Navigation ◽  
Good Balance ◽  
Integrated Navigation System ◽  
Navigation Data ◽  
Navigation Algorithms ◽  
The Cost

A GPS/inertial navigation system design scheme is introduced. Combination of DSP and FPGA is used on the navigation board, and micro inertial navigation measuring element --ADIS16405 is used to sample required navigation data. DSP mainly implements navigation calculating based on navigation data, and realizes different navigation algorithms; FPGA in the system plays centeral control role, and not only samples IMU and GPS data, but also synchronize IMU and GPS in the real time, and preprocess and packet the navigation data. This paper also introduces the design of the software on FPGA. Practice proves that the scheme is feasible, and achieves the good balance between the cost, reliability and efficiency.

scholarly journals Analysis and Verification of Rotation Modulation Effects on Inertial Navigation System based on MEMS Sensors

2013 ◽  
Vol 66 (5) ◽  
pp. 751-772 ◽  
Author(s):  
Xueyun Wang ◽  
Jie Wu ◽  
Tao Xu ◽  
Wei Wang
Keyword(s):  
Navigation System ◽  
Inertial Navigation System ◽  
Inertial Sensors ◽  
Inertial Navigation ◽  
Cost Effective ◽  
Navigation Systems ◽  
Inertial Navigation Systems ◽  
Mems Sensors ◽  
Micro Electro Mechanical Systems ◽  
Position Accuracy

Inertial Navigation Systems (INS) were large, heavy and expensive until the development of cost-effective inertial sensors constructed with Micro-electro-mechanical systems (MEMS). However, the large errors and poor error repeatability of MEMS sensors make them inadequate for application in many situations even with frequent calibration. To solve this problem, a systematic error auto-compensation method, Rotation Modulation (RM) is introduced and detailed. RM does no damage to autonomy, which is one of the most important characteristics of an INS. In this paper, the RM effects on navigation performance are analysed and different forms of rotation schemes are discussed. A MEMS-based INS with the RM technique applied is developed and specific calibrations related to rotation are investigated. Experiments on the developed system are conducted and results verify that RM can significantly improve navigation performance of MEMS-based INS. The attitude accuracy is improved by a factor of 5, and velocity/position accuracy by a factor of 10.

Integration of Navigation Data

1995 ◽  
Vol 48 (1) ◽  
pp. 114-135 ◽  
Author(s):  
A. Svensson ◽  
J. Holst
Keyword(s):  
Measurement System ◽  
Navigation System ◽  
Measurement Errors ◽  
Inertial Navigation System ◽  
Inertial Navigation ◽  
Measuring Instruments ◽  
Extended Kalman Filtering ◽  
Satellite Navigation System ◽  
Navigation Data ◽  
System A

This article treats integration of navigation data from a variety of sensors in a submarine using extended Kalman filtering in order to improve the accuracy of position, velocity and heading estimates. The problem has been restricted to planar motion. The measurement system consists of an inertial navigation system, a gyro compass, a passive log, an active log and a satellite navigation system. These subsystems are briefly described and models for the measurement errors are given.Four different extended Kalman filters have been tested by computer simulations. The simulations distinctly show that the passive subsystems alone are insufficient to improve the estimate of the position obtained from the inertial navigation system. A log measuring the velocity relative to the ground or a position determining system are needed. The improvement depends on the accuracy of the measuring instruments, the extent of time the instrument can be used and which filter is being used. The most complex filter, which contains fourteen states, eight to describe the motion of the submarine and six to describe the measurement system, including a model of the inertial navigation system, works very well.

scholarly journals A Novel Information Fusion Method for Redundant Rotational Inertial Navigation Systems Based on Reduced-Order Kalman Filter

2018 ◽  
Vol 160 ◽  
pp. 07005
Author(s):  
Lin Wang ◽  
Wenqi Wu ◽  
Guo Wei ◽  
Jinlong Li ◽  
Ruihang Yu
Keyword(s):  
Kalman Filter ◽  
Information Fusion ◽  
Navigation System ◽  
Inertial Navigation System ◽  
High Reliability ◽  
Inertial Navigation ◽  
Position Error ◽  
Navigation Systems ◽  
Inertial Navigation Systems ◽  
Reduced Order

The redundant rotational inertial navigation systems can satisfy not only the high-accuracy but also the high-reliability demands of underwater vehicle on navigation system. However, different systems are usually independent, and lack of information fusion. A reduced-order Kalman filter is designed to fuse the navigation information output of redundant rotational navigation systems which usually include a dual-axis rotational inertial navigation system being master system and a single-axis rotational inertial navigation system being hot-backup system. The azimuth gyro drift of single-axis rotational inertial navigation system can be estimated by the designed filter, whereby the position error caused by that can be compensated with the aid of designed position error prediction model. As a result, the improved performance of single-axis rotational inertial navigation system can guarantee the position accuracy in the case of dual-axis system failure. Semi-physical simulation and experiment verify the effectiveness of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document