scholarly journals Petrophysical Evaluation of Mauddud Formation in Selected Wells from Ratawi Oil Field, Southern Iraq

2021 ◽  
pp. 2956-2969
Author(s):  
Humam Q. Hameed ◽  
Afrah H. Saleh
Keyword(s):  
Water Saturation ◽  
High Water ◽  
Effective Porosity ◽  
Oil Field ◽  
Well Logs ◽  
Reservoir Properties ◽  
Oil Saturation ◽  
Shale Volume ◽  
Southern Iraq ◽  
Petrophysical Evaluation

    The objective of this paper is determining the petrophysical properties of the Mauddud Formation (Albian-Early Turonian) in Ratawi Oil Field depending on the well logs data by using interactive petrophysical software IP (V4.5). We evaluated parameters of available logs that control the reservoir properties of the formation, including shale volume, effective porosity, and water saturation. Mauddud Formation is divided into five units, which are distinguished by various reservoir characteristics. These units are A, B, C, D, and E. Through analyzing results of the computer processed interpretation (CPI) of available wells, we observed that the main reservoir units are B and D, being distinguished by elevated values of effective porosity (10%-32%) and oil saturation (95%-30%) with low shale content (6%-30%). Whereas, units A, C, and E were characterized by low or non-reservoir properties, due to high water saturation and low values of effective porosity caused by increased volume shale.

scholarly journals An Integrated Microfacies and Well Logs-Based Reservoir Characterization of Yamama Formation, Southern Iraq

2021 ◽  
pp. 3570-3586
Author(s):  
Mohanad M. Al-Ghuribawi ◽  
Rasha F. Faisal
Keyword(s):  
Reservoir Characterization ◽  
Water Saturation ◽  
Effective Porosity ◽  
Well Logs ◽  
Petrophysical Properties ◽  
Reservoir Properties ◽  
Thin Sections ◽  
Porosity And Permeability ◽  
South Of Iraq ◽  
Southern Iraq

     The Yamama Formation includes important carbonates reservoir that belongs to the Lower Cretaceous sequence in Southern Iraq. This study covers two oil fields (Sindbad and Siba) that are distributed Southeastern Basrah Governorate, South of Iraq. Yamama reservoir units were determined based on the study of cores, well logs, and petrographic examination of thin sections that required a detailed integration of geological data and petrophysical properties. These parameters were integrated in order to divide the Yamama Formation into six reservoir units (YA0, YA1, YA2, YB1, YB2 and YC), located between five cap rock units. The best facies association and petrophysical properties were found in the shoal environment, where the most common porosity types were the primary (interparticle) and secondary (moldic and vugs) . The main diagenetic process that occurred in YA0, YA2, and YB1 is cementation, which led to the filling of pore spaces by cement and subsequently decreased the reservoir quality (porosity and permeability). Based on the results of the final digital  computer interpretation and processing (CPI) performed by using the Techlog software, the units YA1 and YB2 have the best reservoir properties. The unit YB2 is characterized by a good effective porosity average, low water saturation, good permeability, and large thickness that distinguish it from other reservoir units.

scholarly journals Hartha Formation divisions Based on Well Logs Analysis in Majnoon Oil Field, Southern Iraq

2020 ◽  
pp. 1362-1369
Author(s):  
Gheed Chaseb ◽  
Thamer A. Mahdi
Keyword(s):  
Water Saturation ◽  
Effective Porosity ◽  
Oil Field ◽  
Well Logs ◽  
Petrophysical Properties ◽  
Reservoir Properties ◽  
Thin Sections ◽  
Facies Associations ◽  
Log Interpretation ◽  
Well Logs Interpretation

This study aims to evaluate reservoir characteristics of Hartha Formation in Majnoon oil field based on well logs data for three wells (Mj-1, Mj-3 and Mj-11). Log interpretation was carried out by using a full set of logs to calculate main petrophysical properties such as effective porosity and water saturation, as well as to find the volume of shale. The evaluation of the formation included computer processes interpretation (CPI) using Interactive Petrophysics (IP) software.  Based on the results of CPI, Hartha Formation is divided into five reservoir units (A1, A2, A3, B1, B2), deposited in a ramp setting. Facies associations is added to well logs interpretation of Hartha Formation, and was inferred by a microfacies analysis of thin sections from core and cutting samples. The CPI shows that the A2 is the main oil- bearing unit, which is characterized by good reservoir properties, as indicated by high effective porosity, low water saturation, and low shale volume. Less important units include A1 and A3, because they have low petrophysical properties compared to the unit A2.

scholarly journals Reservoir units of Mishrif Formation in Majnoon Oil field, Southern Iraq

2019 ◽  
pp. 2656-2663
Author(s):  
Layla khudhur Abbas ◽  
Thamar Abdullah Mahdi
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
High Volume ◽  
Effective Porosity ◽  
Oil Field ◽  
Reservoir Properties ◽  
Marine Facies ◽  
Wireline Logs ◽  
Low Volume ◽  
Southern Iraq

The reservoir units of Mishrif Formation in Majnoon oil field were studied by using available wireline logs (gamma ray, porosity and resistivity) and facies that derived from core and cutting samples for three wells including Mj-1, Mj-15, and Mj-20. The reservoir properties were determined and interpreted by using IP software. The results showed that unit D have the best reservoir properties due to high effective porosity, low water saturation and very low volume of shale. Furthermore, a large part of this unit was deposited in shoal environment. The other reservoir units are then graded in reservoir properties including units B, A, F & E respectively, except unit C, which is considered as a cap unit, because it consists of restricted marine facies so that; it has high volume of shale and water saturation and very low effective porosity.

scholarly journals Petrophysical Properties of Nahr Umar Formation in Nasiriya Oil Field

2020 ◽  
Vol 21 (3) ◽  
pp. 9-18
Author(s):  
Ahmed Abdulwahhab Suhail ◽  
Mohammed H. Hafiz ◽  
Fadhil S. Kadhim
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Oil Field ◽  
Well Logs ◽  
High Porosity ◽  
Reservoir Properties ◽  
Petrophysical Parameters ◽  
Resistivity Logs ◽  
Lithology Prediction ◽  
Porosity And Permeability

   Petrophysical characterization is the most important stage in reservoir management. The main purpose of this study is to evaluate reservoir properties and lithological identification of Nahr Umar Formation in Nasiriya oil field. The available well logs are (sonic, density, neutron, gamma-ray, SP, and resistivity logs). The petrophysical parameters such as the volume of clay, porosity, permeability, water saturation, were computed and interpreted using IP4.4 software. The lithology prediction of Nahr Umar formation was carried out by sonic -density cross plot technique. Nahr Umar Formation was divided into five units based on well logs interpretation and petrophysical Analysis: Nu-1 to Nu-5. The formation lithology is mainly composed of sandstone interlaminated with shale according to the interpretation of density, sonic, and gamma-ray logs. Interpretation of formation lithology and petrophysical parameters shows that Nu-1 is characterized by low shale content with high porosity and low water saturation whereas Nu-2 and Nu-4 consist mainly of high laminated shale with low porosity and permeability. Nu-3 is high porosity and water saturation and Nu-5 consists mainly of limestone layer that represents the water zone.

scholarly journals Shale volume and permeability of the Miocene unconsolidated turbidite sands of Bonga oil field, Niger delta, Nigeria

2017 ◽  
Vol 5 (1) ◽  
pp. 37 ◽  
Author(s):  
Inyang Namdie ◽  
Idara Akpabio ◽  
Agbasi Okechukwu .E.
Keyword(s):  
Niger Delta ◽  
Gamma Ray ◽  
Water Saturation ◽  
Strong Dependence ◽  
Water Injection ◽  
Oil Field ◽  
Reservoir Properties ◽  
Injection Wells ◽  
Log Data ◽  
Shale Volume

Bonga oil field is located 120km (75mi) southeast of the Niger Delta, Nigeria. It is a subsea type development located about 3500ft water depth and has produced over 330 mmstb of hydrocarbon till date with over 16 oil producing and water injection wells. The producing formation is the Middle to Late Miocene unconsolidated turbidite sandstones with lateral and vertical homogeneities in reservoir properties. This work, analysis the petrophysical properties of the reservoir units for the purpose of modeling the effect of shale content on permeability in the reservoir. Turbidite sandstones are identified by gamma-ray log signatures as intervals with 26-50 API, while sonic, neutron, resistivity, caliper and other log data are applied to estimate volume of shale ranging between 0.972 v/v for shale intervals and 0.0549 v/v for turbidite sands, water saturation of 0.34 v/v average in most sand intervals, porosity range from 0.010 for shale intervals to 0.49 v/v for clean sands and permeability values for the send interval 11.46 to2634mD, for intervals between 7100 to 9100 ft., Data were analyzed using the Interactive Petrophysical software that splits the whole curve into sand and shale zones and estimates among other petrophysical parameters the shale contents of the prospective zones. While Seismic data revealed reservoir thickness ranging from 25ft to over 140ft well log data within the five wells have identified sands of similar thickness and estimated average permeability of700mD. Within the sand units across the five wells, cross plots of estimated porosity, volume of shale and permeability values reveal strong dependence of permeability on shale volume and a general decrease in permeability in intervals with shale volume. It is concluded that sand units with high shale contents that are from0.500 to0.900v/v will not provide good quality reservoir in the field.

scholarly journals Evaluation of Mishrif Reservoir in Abu Amood Oil Field, Southern Iraq

2021 ◽  
pp. 4758-4768
Author(s):  
Ahmed Hussain ◽  
Medhat E. Nasser ◽  
Ghazi Hassan
Keyword(s):  
Total Porosity ◽  
Effective Porosity ◽  
Oil Field ◽  
Well Logs ◽  
Neutron Density ◽  
High Porosity ◽  
Petrophysical Properties ◽  
Density Method ◽  
Southern Iraq

     The main goal of this study is to evaluate Mishrif Reservoir in Abu Amood oil field, southern Iraq, using the available well logs. The sets of logs were acquired for wells AAm-1, AAm-2, AAm-3, AAm-4, and AAm-5. The evaluation included the identification of the reservoir units and the calculation of their petrophysical properties using the Techlog software. Total porosity was calculated using the neutron-density method and the values were corrected from the volume of shale in order to calculate the effective porosity. Computer processed interpretation (CPI) was accomplished for the five wells. The results show that Mishrif Formation in Abu Amood field consists of three reservoir units with various percentages of hydrocarbons that were concentrated in all of the three units, but in different wells. All of the units have high porosity, especially unit two, although it is saturated with water.

scholarly journals Evaluation of Petrophysical Properties Using Well Logs of Yamama Formation in Abu Amood Oil Field, Southern Iraq

2021 ◽  
Vol 54 (1E) ◽  
pp. 67-77
Author(s):  
Buraq Adnan Al-Baldawi
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Bulk Water ◽  
Carbonate Reservoir ◽  
Oil Field ◽  
Well Logs ◽  
Water Volume ◽  
High Porosity ◽  
Petrophysical Properties ◽  
Reservoir Properties

The petrophysical analysis is very important to understand the factors controlling the reservoir quality and production wells. In the current study, the petrophysical evaluation was accomplished to hydrocarbon assessment based on well log data of four wells of Early Cretaceous carbonate reservoir Yamama Formation in Abu-Amood oil field in the southern part of Iraq. The available well logs such as sonic, density, neutron, gamma ray, SP, and resistivity logs for wells AAm-1, AAm-2, AAm-3, and AAm-5 were used to delineate the reservoir characteristics of the Yamama Formation. Lithologic and mineralogic studies were performed using porosity logs combination cross plots such as density vs. neutron cross plot and M-N mineralogy plot. These cross plots show that the Yamama Formation consists mainly of limestone and the essential mineral components are dominantly calcite with small amounts of dolomite. The petrophysical characteristics such as porosity, water and hydrocarbon saturation and bulk water volume were determined and interpreted using Techlog software to carried out and building the full computer processed interpretation for reservoir properties. Based on the petrophysical properties of studied wells, the Yamama Formation is divided into six units; (YB-1, YB-2, YB-3, YC-1, YC-2 and YC-3) separated by dense non porous units (Barrier beds). The units (YB-1, YB-2, YC-2 and YC-3) represent the most important reservoir units and oil-bearing zones because these reservoir units are characterized by good petrophysical properties due to high porosity and low to moderate water saturation. The other units are not reservoirs and not oil-bearing units due to low porosity and high-water saturation.

scholarly journals Petrophysical Properties of Khasib Formation in East Baghdad Oil Field Southern Area

2020 ◽  
Vol 21 (4) ◽  
pp. 41-48
Author(s):  
Layth Abdulmalik Jameel ◽  
Fadhil S. Kadhim ◽  
Hussein Al-Sudani
Keyword(s):  
Water Saturation ◽  
High Water ◽  
Oil Field ◽  
Neutron Density ◽  
Well Log ◽  
Petrophysical Properties ◽  
Shale Volume ◽  
Southern Area ◽  
Volume Porosity ◽  
Well Log Analysis

Petrophysical properties evaluation from well log analysis has always been crucial for the identification and assessment of hydrocarbon bearing zones. East Baghdad field is located 10 km east of Baghdad city, where the southern area includes the two southern portions of the field, Khasib formation is the main reservoir of East Baghdad oil field. In this paper, well log data of nine wells have been environmentally corrected, where the corrected data used to determine lithology, shale volume, porosity, and water saturation. Lithology identified by two methods; neutron-density and M-N matrix plots, while the shale volume estimated by single shale indicator and dual shale indicator, The porosity is calculated from the three common porosity logs; density log, neutron log, and sonic log, the water saturation is calculated by Indonesian model and Archie equation, and the results of the two methods were compared with the available core data to check the validity of the calculation. The results show that the main lithology in the reservoir is limestone, shale volume ranged between 0.152 to 0.249, porosity between 0.147 to 0.220, and water saturation from 0.627 to 0.966, the high-water saturation indicate that the water quantity is the determining factor of the reservoir units.

scholarly journals Evaluation of shale volume and effective porosity using larionov and archie equations from wire-line logs, Niger delta Nigeria

2019 ◽  
Vol 8 (4) ◽  
pp. 257
Author(s):  
Mfoniso U. Aka ◽  
Johnson Cletus Ibuot ◽  
Francisca N. Okeke
Keyword(s):  
Niger Delta ◽  
Water Saturation ◽  
Effective Porosity ◽  
Well Log ◽  
Reservoir Properties ◽  
Shale Formations ◽  
Shale Volume ◽  
Niger Delta Region ◽  
Rock Formations ◽  
Water Resistivity

<p>In Niger Delta region of Nigeria, reservoirs are mostly loose and unstratified sands to hold fluids. In this paper, three different wells in central Niger Delta were assessed for shale volume and actual porosity. The results of the analysis delineate the presence of sand, sand-shale and shale formations. Hydrocarbon prospecting was found to be strong in sand, moderate in sandshale and shallow in shale respectively. However, existent of shale lessens effective porosity and water saturation of the rock formations. The extent of the formation extends from 1300 to 2500 m. Shale volume and actual porosity values extend from 0.00 to 0.302 dec and 0.047 to 0.302 dec which decrease with increasing depth. Comparably, the water saturation and water resistivity extend from 0.432 to 0.779 dec and 0.106 to 2.918 Ohm respectively. These values of actual porosity are strong in sand, moderate in sand-shale and shallow in shale formations. The results from this assessment proof well log a vital and easier tool in assessing of reservoir properties.</p>

scholarly journals 3D Facies Modeling of Mishrif Reservoir in Halfaya Oil Field

2021 ◽  
pp. 180-191
Author(s):  
Medhat E. Nasser
Keyword(s):  
Water Saturation ◽  
Sedimentary Facies ◽  
High Water ◽  
Oil Field ◽  
Microfacies Analysis ◽  
Facies Modeling ◽  
Reservoir Properties ◽  
Thin Sections ◽  
Sedimentary Environments ◽  
Log Interpretation

     This research deals with the study of the types and distribution of petrographic microfacies and Paleoenvironments of Mishrif Formation in Halfaya oil field, to define specific sedimentary environments. These environments were identified by microscopic examination of 35 thin sections of cutting samples for well HF-9H as well as 150 thin sections of core and cutting samples for well HF-I. Depending on log interpretation of wells HF-1, HF-316, HF-109, IIF-115, and IIF-272, the sedimentary facies were traced vertically through the use of various logs by Petrel 2013 software in addition to previous studies. Microfacies analysis showed the occurrence of six main Paleoenvironments within Mishrif succession, represented by basin, slope, shoal, Rudist biostrome, back shoal, and lagoon. Mishrif Formation was divided into six reservoir units depending on well logs and CPI. These units are separated by low porosity and high-water saturation of barrier beds. The reservoir beds from top to bottom are MA, MB1, MB2, MCI, and MC2. The reservoir units MB1, MB2, and MCI are the most important in the field of interest due to good reservoir properties and being the principle oil-bearing units in Mishrif Formation.

Sign in / Sign up

Export Citation Format

Share Document