Analysis of the impact of heat losses on an unstable model rocket-engine combustor using Large-Eddy Simulation

Author(s):  
Romain Garby ◽  
Laurent Selle ◽  
Thierry Poinsot
Author(s):  
S. Puggelli ◽  
T. Lancien ◽  
K. Prieur ◽  
D. Durox ◽  
S. Candel ◽  
...  

Abstract The process of ignition in aero-engines raises many practical issues that need to be faced during the design process. Recent experiments and simulations have provided detailed insights on ignition in single-injector configurations and on the light-round sequence in annular combustors. It was shown that Large Eddy Simulation (LES) was able to reliably reproduce the physical phenomena involved in the ignition of both perfectly premixed and liquid spray flames. The present study aims at further extending the knowledge on flame propagation during the ignition of annular multiple injector combustors by focusing the attention on the effects of heat losses, which have not been accounted for in numerical calculations before. This problem is examined by developing Large Eddy Simulations of the light-round process with a fixed temperature at the solid boundaries. Calculations are carried out for a laboratory-scale annular system. Results are compared in terms of flame shape and light-round duration with available experiments and with an adiabatic LES serving as a reference. Wall heat losses lead to a significant reduction in the flame propagation velocity as observed experimentally. However, the LES underestimates this effect and leads to a globally shorter light-round. To better understand this discrepancy, the study focuses then on the analysis of the near wall region where the velocity and temperature boundary layers must be carefully described. An a-priori analysis underlines the shortcomings associated to the chosen wall law by considering a more advanced wall model that fully accounts for variable thermophysical properties and for the unsteadiness of the boundary layer.


Author(s):  
Yunfei Wang ◽  
Huanlong Chen ◽  
Huaping Liu ◽  
Yanping Song ◽  
Fu Chen

An in-house large eddy simulation (LES) code based on three-dimensional compressible N-S equations is used to research the impact of incoming wakes on unsteady evolution characteristic in a low-pressure turbine (LPT) cascade. The Mach number is 0.4 and Reynolds number is 0.6 × 105 (based on the axial chord and outlet velocity). The reduced frequency of incoming wakes is Fred = 0 (without wakes), 0.37 and 0.74. A detailed analysis of Reynolds stresses and turbulent kinetic energy inside the boundary layer has been carried out. Particular consideration is devoted to the transport process of incoming wakes and the intermittent property of the unsteady boundary layer. With the increase of reduced frequency, the inhibiting effect of wakes on boundary layer separation gradually enhances. The separation at the rear part of the suction side is weakened and the separation point moves downstream. However, incoming wakes lead to an increase in dissipation and aerodynamic losses in the main flow area. Excessive reduced frequency ( Fred = 0.74) causes the main flow area to become one of the main source areas of loss. An optimal reduced frequency exists to minimize the aerodynamic loss of the linear cascade.


2010 ◽  
Vol 652 ◽  
pp. 5-44 ◽  
Author(s):  
S. DUPONT ◽  
F. GOSSELIN ◽  
C. PY ◽  
E. DE LANGRE ◽  
P. HEMON ◽  
...  

In order to investigate the possibility of modelling plant motion at the landscape scale, an equation for crop plant motion, forced by an instantaneous velocity field, is introduced in a large-eddy simulation (LES) airflow model, previously validated over homogeneous and heterogeneous canopies. The canopy is simply represented as a poroelastic continuous medium, which is similar in its discrete form to an infinite row of identical oscillating stems. Only one linear mode of plant vibration is considered. Two-way coupling between plant motion and the wind flow is insured through the drag force term. The coupled model is validated on the basis of a comparison with measured movements of an alfalfa crop canopy. It is also compared with the outputs of a linear stability analysis. The model is shown to reproduce the well-known phenomenon of ‘honami’ which is typical of wave-like crop motions on windy days. The wavelength of the main coherent waving patches, extracted using a bi-orthogonal decomposition (BOD) of the crop velocity fields, is in agreement with that deduced from video recordings. The main spatial and temporal characteristics of these waving patches exhibit the same variation with mean wind velocity as that observed with the measurements. However they differ from the coherent eddy structures of the wind flow at canopy top, so that coherent waving patches cannot be seen as direct signatures of coherent eddy structures. Finally, it is shown that the impact of crop motion on the wind dynamics is negligible for current wind speed values. No lock-in mechanism of coherent eddy structures on plant motion is observed, in contradiction with the linear stability analysis. This discrepancy may be attributed to the presence of a nonlinear saturation mechanism in LES.


2010 ◽  
Vol 10 (10) ◽  
pp. 24345-24370
Author(s):  
V. Anabor ◽  
U. Rizza ◽  
G. A. Degrazia ◽  
E. de Lima Nascimento

Abstract. An isolated and stationary microburst is simulated using a 3-D time-dependent, high resolution Large-Eddy Simulation (LES) model. The microburst downdraft is initiated by specifying a simplified cooling source at the top of the domain near 2 km. The modelled time scale for this damaging wind (30 m/s) is of order of few min with a spatial scale enclosing a region with 500 m radius around the impact point. These features are comparable with results obtained from full-cloud models. The simulated flow shows the principal features observed by Doppler radar and others observational full-scale downburst events. In particular are observed the expansion of the primary and secondary cores, the presence of the ring vortex at the leading edge of the cool outflow, and finally an accelerating outburst of surface winds. This result evidences the capability of LES to reproduce complexes phenomena like a Microburst and indicates the potential of LES for utilization in atmospheric phenomena situated below the storm scale and above the microscale, which generally involves high velocities in a short time scale.


2011 ◽  
Vol 679 ◽  
pp. 156-193 ◽  
Author(s):  
EZGI S. TAŞKINOĞLU ◽  
JOSETTE BELLAN

For flows at supercritical pressure, p, the large-eddy simulation (LES) equations consist of the differential conservation equations coupled with a real-gas equation of state, and the equations utilize transport properties depending on the thermodynamic variables. Compared to previous LES models, the differential equations contain not only the subgrid-scale (SGS) fluxes but also new SGS terms, each denoted as a ‘correction’. These additional terms, typically assumed null for atmospheric pressure flows, stem from filtering the differential governing equations and represent differences, other than contributed by the convection terms, between a filtered term and the same term computed as a function of the filtered flow field. In particular, the energy equation contains a heat-flux correction (q-correction) which is the difference between the filtered divergence of the molecular heat flux and the divergence of the molecular heat flux computed as a function of the filtered flow field. We revisit here a previous a priori study where we only had partial success in modelling the q-correction term and show that success can be achieved using a different modelling approach. This a priori analysis, based on a temporal mixing-layer direct numerical simulation database, shows that the focus in modelling the q-correction should be on reconstructing the primitive variable gradients rather than their coefficients, and proposes the approximate deconvolution model (ADM) as an effective means of flow field reconstruction for LES molecular heat-flux calculation. Furthermore, an a posteriori study is conducted for temporal mixing layers initially containing oxygen (O) in the lower stream and hydrogen (H) or helium (He) in the upper stream to examine the benefit of the new model. Results show that for any LES including SGS-flux models (constant-coefficient gradient or scale-similarity models; dynamic-coefficient Smagorinsky/Yoshizawa or mixed Smagorinsky/Yoshizawa/gradient models), the inclusion of the q-correction in LES leads to the theoretical maximum reduction of the SGS molecular heat-flux difference; the remaining error in modelling this new subgrid term is thus irreducible. The impact of the q-correction model first on the molecular heat flux and then on the mean, fluctuations, second-order correlations and spatial distribution of dependent variables is also demonstrated. Discussions on the utilization of the models in general LES are presented.


2019 ◽  
Vol 142 (1) ◽  
Author(s):  
S. Puggelli ◽  
T. Lancien ◽  
K. Prieur ◽  
D. Durox ◽  
S. Candel ◽  
...  

Abstract The process of ignition in aero-engines raises many practical issues that need to be faced during the design process. Recent experiments and simulations have provided detailed insights into ignition in single-injector configurations and on the light-round sequence in annular combustors. It was shown that large eddy simulation (LES) was able to reliably reproduce the physical phenomena involved in the ignition of both perfectly premixed and liquid spray flames. This study aims at further extending the knowledge on flame propagation during the ignition of annular multiple injector combustors by focusing the attention on the effects of heat losses, which have not been accounted for in numerical calculations before. This problem is examined by developing LESs of the light-round process with a fixed temperature at the solid boundaries. Calculations are carried out for a laboratory-scale annular system. Results are compared in terms of flame shape and light-round duration with available experiments and with an adiabatic LES serving as a reference. Wall heat losses lead to a significant reduction in the flame propagation velocity as observed experimentally. However, the LES underestimates this effect and leads to a globally shorter light-round. To better understand this discrepancy, the study focuses then on the analysis of the near wall region. An a priori analysis underlines the shortcomings associated with the chosen wall law by considering a more advanced wall model that fully accounts for variable thermophysical properties and for the unsteadiness of the boundary layer.


2014 ◽  
Vol 152 (2) ◽  
pp. 189-211 ◽  
Author(s):  
J. M. Edwards ◽  
S. Basu ◽  
F. C. Bosveld ◽  
A. A. M. Holtslag

Sign in / Sign up

Export Citation Format

Share Document