Development and optimization of a hypersonic civil aircraft propulsion plant with regenerator system

2019 ◽  
Author(s):  
Pedro M. Goncalves ◽  
Ali C. Ispir ◽  
Bayindir H. Saracoglu
Keyword(s):  
Civil Aircraft ◽  
Regenerator System ◽  
Aircraft Propulsion

Propellers for Military and Civil Aircraft

1956 ◽  
Vol 60 (548) ◽  
pp. 515-522
Author(s):  
L. G. Fairhurst
Keyword(s):  
List Type ◽  
Type Number ◽  
Civil Aircraft ◽  
The Future ◽  
Construction Operation ◽  
Aircraft Propulsion

The main purpose of this paper is to outline the position which the propeller holds in current aircraft propulsion, its construction, operation and its future. The paper has been arranged in four parts, as follows:–1.Present and future types of aircraft foreseen with propellers.2.Engines for turbo-prop power units.3.The Propeller.4.The Future.In the present military field propellers are used for the following types of aircraft:—Heavy transport and Army reconnaissance, for example the Beverley and Pioneer, Submarine reconnaissance, Naval Strike Fighters and R.A.F. Trainers as exemplified by the Gannet, Wyvern and Provost.

Effect of Hot Probe Temperature on Ignition of Alcohol-to-Jet (ATJ) Fuel Spray under Aircraft Propulsion System Conditions

2021 ◽  
Author(s):  
Je Ir Ryu ◽  
Austen Motily ◽  
Tonghun Lee ◽  
Riccardo Scarcelli ◽  
Sibendu Som ◽  
...  
Keyword(s):  
Propulsion System ◽  
Fuel Spray ◽  
Hot Probe ◽  
Aircraft Propulsion System ◽  
Aircraft Propulsion

COMPUTATIONAL AND EXPERIMENTAL STUDIES OF A LOW-EMISSION BURNER FOR A PERSPECTIVE TURBOJET ENGINE WITH THE COMPRESSION RATIO EXCEEDING 40

2020 ◽  
Author(s):  
M. A. Danilov ◽  
◽  
M. V. Drobysh ◽  
A. N. Dubovitsky ◽  
F. G. Markov ◽  
...  
Keyword(s):  
Compression Ratio ◽  
Experimental Studies ◽  
The Other ◽  
Aircraft Engines ◽  
Engine Efficiency ◽  
Other Hand ◽  
Turbojet Engine ◽  
Low Emission ◽  
Civil Aircraft ◽  
The One

Restrictions of emissions for civil aircraft engines, on the one hand, and the need in increasing the engine efficiency, on the other hand, cause difficulties during development of low-emission combustors for such engines.

Metrological aspects of pre-flight anti-icing procedures for civil aircraft

2019 ◽  
pp. 22-26
Author(s):  
А. Богоявленский ◽  
A. Bogoyavlenskiy
Keyword(s):  
Negative Impact ◽  
Landing Gear ◽  
Flight Performance ◽  
Spray Nozzle ◽  
Subsequent Formation ◽  
Inlet Guide Vanes ◽  
Civil Aircraft ◽  
Engine Compressor ◽  
Temperature And Pressure ◽  
Instrumental Control

Snow-ice deposits formed on the outer surfaces of aircrafts on the ground during parking can have a negative impact during take-off due to the deterioration of aerodynamic and flight performance, a significant and even critical decrease in lift, increased drag, blocking controls, difficulty or blocking of landing gear retraction, damage to the blades of inlet guide vanes and/or the blades of an engine compressor. To exclude the influence of snow and ice deposits, anti-icing treatment is performed, including their removal and/or protection from subsequent formation. For this purpose, special anti-icing machines (deicers), equipped with such means of instrumental control as counters of anti-icing fluid pumps, measuring scales of anti-icing fluid tanks, thermometers and pressure gauges for temperature and pressure measuring at the outlet of a spray nozzle, are used. The article deals with the metrological aspects of civil aircrafts anti-icing prior to flight.

scholarly journals Design of a Variable-Stiffness Compliant Skin for a Morphing Leading Edge

2021 ◽  
Vol 11 (7) ◽  
pp. 3165
Author(s):  
Zhigang Wang ◽  
Yu Yang
Keyword(s):  
Composite Laminate ◽  
Large Scale ◽  
Design Method ◽  
Leading Edge ◽  
Variable Stiffness ◽  
Manufacturing Constraints ◽  
Aircraft Wing ◽  
Noise Abatement ◽  
Civil Aircraft ◽  
Final Profile

A seamless and smooth morphing leading edge has remarkable potential for noise abatement and drag reduction of civil aircraft. Variable-stiffness compliant skin based on tailored composite laminate is a concept with great potential for morphing leading edge, but the currently proposed methods have difficulty in taking the manufacturing constraints or layup sequence into account during the optimization process. This paper proposes an innovative two-step design method for a variable-stiffness compliant skin of a morphing leading edge, which includes layup optimization and layup adjustment. The combination of these two steps can not only improve the deformation accuracy of the final profile of the compliant skin but also easily and effectively determine the layup sequence of the composite layup. With the design framework, an optimization model is created for a variable-stiffness compliant skin, and an adjustment method for its layups is presented. Finally, the deformed profiles between the directly optimized layups and the adjusted ones are compared to verify its morphing ability and accuracy. The final results demonstrate that the obtained deforming ability and accuracy are suitable for a large-scale aircraft wing.

scholarly journals Design of a 500 kW partially superconducting flux modulation machine for aircraft propulsion

2021 ◽  
Vol 1975 (1) ◽  
pp. 012033
Author(s):  
R Dorget ◽  
S Ayat ◽  
R Biaujaud ◽  
J Tanchon ◽  
J Lacapere ◽  
...  
Keyword(s):  
Flux Modulation ◽  
Aircraft Propulsion
Sign in / Sign up

Export Citation Format

Share Document