Correction: Mitigating Wake Turbulence Risk During Final Approach Via Plate Lines

Author(s):  
Frank N. Holzäpfel ◽  
Anton Stephan ◽  
Grigory Rotshteyn ◽  
Stephan Körner ◽  
Norman Wildmann ◽  
...  
AIAA Journal ◽  
2021 ◽  
pp. 1-16
Author(s):  
Frank Holzäpfel ◽  
Anton Stephan ◽  
Grigory Rotshteyn ◽  
Stephan Körner ◽  
Norman Wildmann ◽  
...  

2020 ◽  
Author(s):  
Frank N. Holzäpfel ◽  
Anton Stephan ◽  
Grigory Rotshteyn ◽  
Stephan Körner ◽  
Norman Wildmann ◽  
...  

Author(s):  
Zihan Peng ◽  
Junfeng Zhang ◽  
Tong Xiang ◽  
Bin Wang ◽  
Haipeng Guo

Air traffic administration requires evidence when promoting new technology or a new concept of operation. Therefore, when decision support tools are applied, it is necessary to analyze the costs and benefits quantitatively. This paper focuses on the evaluation of Key Performance Indicators (KPIs) correlated with the improvement of arrival operations after the implementation of the Arrival Management (AMAN) system and Wake Turbulence Re-categorization in China (RECAT-CN). Firstly, we give an overview of the implementation of the AMAN system and RECAT in China. Secondly, the KPIs related to the arrival operation are established according to the characteristics of AMAN and RECAT-CN, based on the existing KPI systems in the field of Air Traffic Management (ATM). The proposed KPIs are: airport acceptance rate; final approach interval; flight time within the terminal area (TMA); and taxi-in time. Thirdly, arrival operation within the TMA around Guangzhou International Airport is used as an example to carry out the quantitative analysis. The region and time range were defined for the performance comparison, and external factors were also examined. Finally, using descriptive and inferential statistics, the proposed KPIs’ comparison results are presented and visualized. Such results indicate a significant improvement in arrival operation with the AMAN system and RECAT-CN at Guangzhou International Airport.


Author(s):  
Van B. Nakagawara ◽  
Ronald W. Montgomery ◽  
Archie E. Dillard ◽  
Leon N. McLin ◽  
C. William Connor

2005 ◽  
Vol 1 (5) ◽  
pp. 501-517 ◽  
Author(s):  
A. Varnavas ◽  
L. Lassiani ◽  
V. Valenta ◽  
A. Ciogli ◽  
F. Gasparrini ◽  
...  

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2203
Author(s):  
Antal Hiba ◽  
Attila Gáti ◽  
Augustin Manecy

Precise navigation is often performed by sensor fusion of different sensors. Among these sensors, optical sensors use image features to obtain the position and attitude of the camera. Runway relative navigation during final approach is a special case where robust and continuous detection of the runway is required. This paper presents a robust threshold marker detection method for monocular cameras and introduces an on-board real-time implementation with flight test results. Results with narrow and wide field-of-view optics are compared. The image processing approach is also evaluated on image data captured by a different on-board system. The pure optical approach of this paper increases sensor redundancy because it does not require input from an inertial sensor as most of the robust runway detectors.


Aerospace ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 29
Author(s):  
Stanley Förster ◽  
Michael Schultz ◽  
Hartmut Fricke

The air traffic is mainly divided into en-route flight segments, arrival and departure segments inside the terminal maneuvering area, and ground operations at the airport. To support utilizing available capacity more efficiently, in our contribution we focus on the prediction of arrival procedures, in particular, the time-to-fly from the turn onto the final approach course to the threshold. The predictions are then used to determine advice for the controller regarding time-to-lose or time-to-gain for optimizing the separation within a sequence of aircraft. Most prediction methods developed so far provide only a point estimate for the time-to-fly. Complementary, we see the need to further account for the uncertain nature of aircraft movement based on a probabilistic prediction approach. This becomes very important in cases where the air traffic system is operated at its limits to prevent safety-critical incidents, e.g., separation infringements due to very tight separation. Our approach is based on the Quantile Regression Forest technique that can provide a measure of uncertainty of the prediction not only in form of a prediction interval but also by generating a probability distribution over the dependent variable. While the data preparation, model training, and tuning steps are identical to classic Random Forest methods, in the prediction phase, Quantile Regression Forests provide a quantile function to express the uncertainty of the prediction. After developing the model, we further investigate the interpretation of the results and provide a way for deriving advice to the controller from it. With this contribution, there is now a tool available that allows a more sophisticated prediction of time-to-fly, depending on the specific needs of the use case and which helps to separate arriving aircraft more efficiently.


Sign in / Sign up

Export Citation Format

Share Document