BATCH DOUGH VISCOSITY INFLUENCE ON FLOW-PRESSURE CHARACTERISTICS OF THE KNEADING MACHINE

2019 ◽  
Author(s):  
В.С. РУБАН ◽  
В.И. АЛЕШИН ◽  
Д.С. БЕЗУГЛЫЙ
Keyword(s):  
Batch Process ◽  
System Of Equations ◽  
Systems Of Equations ◽  
The Finite Element Method ◽  
Dimensional Model ◽  
Symmetric Form ◽  
Pressure Function ◽  
One Dimensional ◽  
Flow Pressure ◽  
Transport Problems

Рассмотрены уравнения баланса и концентрационных потоков, базирующихся на моделях, позволяющих анализировать одноименные модели реологии течения в канале шнека блока замеса тестомесильной машины. Анализ процесса транспортировки и замеса на основе одномерной модели выявил необходимость использования сигмоидальной функции коэффициента напоропроводности от давления. Переход от одномерных задач к многомерным задачам переноса связан с преобразованием систем уравнений к симметричному виду. Полученные системы уравнений после использования теоремы Грина могут быть решены методом конечных элементов. The balance equation and concentration flows based on the models which make it possible to analyze the eponymous models of flow rheology in the block screw channel in a dough mixing machine has been considered. The analysis of the transportation and batch process based on one-dimensional model proved the necessity to apply sigmoidal coefficient of pressure function. The transition from one-dimensional problems to multidimensional transport problems is associated with the transformation of systems of equations to a symmetric form. The resulting system of equations after using Green’s theorem can be solved by the finite element method.

scholarly journals Dissociation and recombination in the electrolyte flow model

2021 ◽  
Vol 2090 (1) ◽  
pp. 012076
Author(s):  
A Shobukhov ◽  
H Koibuchi
Keyword(s):  
Flow Model ◽  
Numerical Solutions ◽  
Stable Equilibrium ◽  
Steady State Solution ◽  
System Of Equations ◽  
Constant Flow ◽  
Dimensional Model ◽  
Electrolyte Flow ◽  
One Dimensional ◽  
Dilute Aqueous Solution

Abstract We propose a one-dimensional model for the dilute aqueous solution of NaCl which is treated as an incompressible fluid placed in the external electric field. This model is based on the Poisson-Nernst-Planck system of equations, which also contains the constant flow velocity as a parameter and considers the dissociation and the recombination of ions. We study the steady-state solution analytically and prove that it is a stable equilibrium. Analyzing the numerical solutions, we demonstrate the importance of dissociation and recombination for the physical meaningfulness of the model.

A control-oriented modular one-dimensional model for wall-flow diesel particulate filters

2017 ◽  
Vol 19 (3) ◽  
pp. 329-346 ◽  
Author(s):  
Soroosh Hassanpour ◽  
John McPhee
Keyword(s):  
Differential Equations ◽  
Dimensional Model ◽  
Orthogonal Collocation ◽  
Diesel Particulate ◽  
One Dimensional ◽  
Diesel Particulate Filters ◽  
Particulate Filters ◽  
Wall Flow ◽  
Flow Pressure ◽  
Regeneration Processes

A comprehensive modular one-dimensional physics-based mathematical model is developed for non-isothermal compressible flow, pressure drop, and filtration and regeneration processes in wall-flow diesel particulate filters. Employing a modified orthogonal collocation method and symbolic computation in Maple™, the governing partial differential equations are reduced to a control-oriented model governed by ordinary differential equations which can be solved in real time. Numerical examples are provided to indicate the accuracy and computational efficiency of the developed model and to study the different behaviors of wall-flow diesel particulate filters.

Transient Response in a One-Dimensional Model of Thermoelastic Contact

1996 ◽  
Vol 63 (3) ◽  
pp. 575-581 ◽  
Author(s):  
Z. S. Olesiak ◽  
Yu. A. Pyryev
Keyword(s):  
Boundary Conditions ◽  
Nonlinear Problem ◽  
Transient Response ◽  
Computational Simulation ◽  
Linear Equations ◽  
Numerical Results ◽  
System Of Equations ◽  
Dimensional Model ◽  
One Dimensional ◽  
Method Of Solution

We consider two layers of different materials with the initial gap between them in the field of temperature with imperfect boundary conditions in Barber’s sense. The model we discuss is that of two contacting rods (Barber and Zhang, 1988) which in the case of a single rod was devised and discussed by Dundurs and Comninou (1976, 1979). In this paper we try to make a step further in the investigation of the essentially nonlinear problem. Though we consider a system of the linear equations of thermoelasticity the nonlinearity is induced by the boundary conditions dependent on the solution. We present an algorithm for solving the system of equations based on Laplace’s transform technique. The method of solution can be used also in the dynamical problems with inertial terms taken into account. The numerical results have been obtained by a kind of computational simulation.

On the Calculation of Coated Fins

2002 ◽  
Author(s):  
C. Cortes ◽  
L. I. Diez ◽  
A. Campo
Keyword(s):  
Differential Equation ◽  
Heat Conduction ◽  
Formal Model ◽  
The Finite Element Method ◽  
Dimensional Model ◽  
Transfer Enhancement ◽  
One Dimensional ◽  
Conjugate System ◽  
Primary Material ◽  
Surrounding Fluid

Coated fins constitute a new concept in heat transfer enhancement. This type of fin is made from a primary material (the substrate) that usually possesses a low-to-moderate thermal conductivity. To augment the transfer of heat from the primary material to a surrounding fluid, a viable avenue is to coat the substrate with a thin layer of a high conductivity material (the coating). Undoubtedly, the formal model for a two-material fin is complicated because it involves a conjugate system of two heat conduction equations in two space variables. As a simpler alternative, Campo (2001) proposed a simplified quasi one-dimensional model that engages an ordinary differential equation with embedded spatial means of the thermal conductivities of the substrate and the coating. The objective of the present study is to extend the statistically-based ideas for a one material fin to two-material fins of variable thickness. To this end, a system of two heat conduction equations, coupled with the applicable boundary conditions, is solved with the Finite Element Method (FEM). The adequacy of the approximate algebraic route for the estimation of fin efficiencies is tested against the numerically-determined fin efficiencies supplied by the FEM.

Modelling Techniques in Applied Glaciology: Numerical Modelling of Avalanches

1983 ◽  
Vol 4 ◽  
pp. 297-297
Author(s):  
G. Brugnot
Keyword(s):  
Finite Difference Method ◽  
Transverse Velocity ◽  
Longitudinal Velocity ◽  
Momentum Conservation ◽  
Dimensional Model ◽  
One Dimensional ◽  
Modelling Techniques ◽  
Reference Grid ◽  
The One ◽  
Near Future

We consider the paper by Brugnot and Pochat (1981), which describes a one-dimensional model applied to a snow avalanche. The main advance made here is the introduction of the second dimension in the runout zone. Indeed, in the channelled course, we still use the one-dimensional model, but, when the avalanche spreads before stopping, we apply a (x, y) grid on the ground and six equations have to be solved: (1) for the avalanche body, one equation for continuity and two equations for momentum conservation, and (2) at the front, one equation for continuity and two equations for momentum conservation. We suppose the front to be a mobile jump, with longitudinal velocity varying more rapidly than transverse velocity.We solve these equations by a finite difference method. This involves many topological problems, due to the actual position of the front, which is defined by its intersection with the reference grid (SI, YJ). In the near future our two directions of research will be testing the code on actual avalanches and improving it by trying to make it cheaper without impairing its accuracy.

Wavelets in the Solution of Nongray Radiative Heat Transfer Equation

1998 ◽  
Vol 120 (1) ◽  
pp. 133-139 ◽  
Author(s):  
Y. Bayazitoglu ◽  
B. Y. Wang
Keyword(s):  
Transfer Equation ◽  
Solution Method ◽  
Radiative Heat ◽  
Radiative Transfer Equation ◽  
Basis Functions ◽  
Wavelet Basis ◽  
System Of Equations ◽  
Heat Transfer Equation ◽  
One Dimensional ◽  
The One

The wavelet basis functions are introduced into the radiative transfer equation in the frequency domain. The intensity of radiation is expanded in terms of Daubechies’ wrapped-around wavelet functions. It is shown that the wavelet basis approach to modeling nongrayness can be incorporated into any solution method for the equation of transfer. In this paper the resulting system of equations is solved for the one-dimensional radiative equilibrium problem using the P-N approximation.

Sign in / Sign up

Export Citation Format

Share Document