scholarly journals EVALUATION OF GENOME SIMILARITIES USING INDEPENDENT COMPONENTS

2020 ◽  
Vol 38 (1) ◽  
pp. 92
Author(s):  
Thelma SÁFADI ◽  
Leila Maria FERREIRA
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Independent Component Analysis ◽  
Clustering Analysis ◽  
Gc Content ◽  
Sliding Window ◽  
Independent Component ◽  
Independent Components ◽  
Linkage Method ◽  
Mixing Matrix ◽  
Complete Linkage Method

We propose the use of independent component analysis to find similarities of genomes. Considering different numbers of independent components, the complete linkage method was used to identify groups based on the estimated coefficients of the mixing matrix. The sequences analyzed correspond to the strains of the Mycobacterium tuberculosis genome, ten sequences were analyzed, obtained from the National Center for Biotechnology Information (NCBI, 2017). The GC-content of each sequence was evaluated using a sliding window of 10,000 bases. The clustering analysis using the independent components of the analyzed sequences was essential to verify the dissimilarity of the sequences.

scholarly journals Robust Independent Component Analysis Based on Two Scatter Matrices

2016 ◽  
Vol 37 (1) ◽  
Author(s):  
Klaus Nordhausen ◽  
Hannu Oja ◽  
Esa Ollila
Keyword(s):  
Independent Component Analysis ◽  
Covariance Matrix ◽  
Simulation Study ◽  
Component Analysis ◽  
Independent Component ◽  
Scatter Matrix ◽  
Independent Components

Oja, Sirkiä, and Eriksson (2006) and Ollila, Oja, and Koivunen (2007) showed that, under general assumptions, any two scatter matrices with the so called independent components property can be used to estimate the unmixing matrix for the independent component analysis (ICA). The method is a generalization of Cardoso’s (Cardoso, 1989) FOBI estimate which uses the regular covariance matrix and a scatter matrix based on fourth moments. Different choices of the two scatter matrices are compared in a simulation study. Based on the study, we recommend always the use of two robust scatter matrices. For possible asymmetric independent components, symmetrized versions of the scatter matrix estimates should be used.

Independent component analysis for reservoir geomorphology and unsupervised seismic facies classification in the Taranaki Basin, New Zealand

2019 ◽  
Vol 7 (3) ◽  
pp. SE19-SE42 ◽  
Author(s):  
David Lubo-Robles ◽  
Kurt J. Marfurt
Keyword(s):  
New Zealand ◽  
Independent Component Analysis ◽  
Order Statistics ◽  
Input Data ◽  
Component Analysis ◽  
Independent Component ◽  
Seismic Facies ◽  
Blue Color ◽  
Independent Components ◽  
Facies Classification

During the past two decades, the number of volumetric seismic attributes has increased to the point at which interpreters are overwhelmed and cannot analyze all of the information that is available. Principal component analysis (PCA) is one of the best-known multivariate analysis techniques that decompose the input data into second-order statistics by maximizing the variance, thus obtaining mathematically uncorrelated components. Unfortunately, projecting the information in the multiple input data volumes onto an orthogonal basis often mixes rather than separates geologic features of interest. To address this issue, we have implemented and evaluated a relatively new unsupervised multiattribute analysis technique called independent component analysis (ICA), which is based on higher order statistics. We evaluate our algorithm to study the internal architecture of turbiditic channel complexes present in the Moki A sands Formation, Taranaki Basin, New Zealand. We input 12 spectral magnitude components ranging from 25 to 80 Hz into the ICA algorithm and we plot 3 of the resulting independent components against a red-green-blue color scheme to generate a single volume in which the colored independent components correspond to different seismic facies. The results obtained using ICA proved to be superior to those obtained using PCA. Specifically, ICA provides improved resolution and separates geologic features from noise. Moreover, with ICA, we can geologically analyze the different seismic facies and relate them to sand- and mud-prone seismic facies associated with axial and off-axis deposition and cut-and-fill architectures.

scholarly journals Statistical Process Monitoring with Biogeography-Based Optimization Independent Component Analysis

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Xiangshun Li ◽  
Di Wei ◽  
Cheng Lei ◽  
Zhiang Li ◽  
Wenlin Wang
Keyword(s):  
Fault Detection ◽  
Independent Component Analysis ◽  
Process Monitoring ◽  
Iteration Method ◽  
Newton Iteration ◽  
Independent Component ◽  
Statistical Process ◽  
Independent Components ◽  
Newton Iteration Method ◽  
Statistical Process Monitoring

Independent Component Analysis (ICA), a type of typical data-driven fault detection techniques, has been widely applied for monitoring industrial processes. FastICA is a classical algorithm of ICA, which extracts independent components by using the Newton iteration method. However, the choice of the initial iterative point of Newton iteration method is difficult; sometimes, selection of different initial iterative points tends to show completely different effects for fault detection. So far, there is still no good strategy to get an ideal initial iterative point for ICA. To solve this problem, a modified ICA algorithm based on biogeography-based optimization (BBO) called BBO-ICA is proposed for the purpose of multivariate statistical process monitoring. The Newton iteration method is replaced with BBO here for extracting independent components. BBO is a novel and effective optimization method to search extremes or maximums. Comparing with the traditional intelligent optimization algorithm of particle swarm optimization (PSO) and so on, BBO behaves with stronger capability and accuracy of searching for solution space. Moreover, numerical simulations are finished with the platform of DAMADICS. Results demonstrate the practicability and effectiveness of BBO-ICA. The proposed BBO-ICA shows better performance of process monitoring than FastICA and PSO-ICA for DAMADICS.

Statistical Independence and Independent Component Analysis

2014 ◽  
Vol 553 ◽  
pp. 564-569
Author(s):  
Yaseen Unnisa ◽  
Danh Tran ◽  
Fu Chun Huang
Keyword(s):  
Independent Component Analysis ◽  
Component Analysis ◽  
Independent Component ◽  
Statistical Testing ◽  
P Value ◽  
Statistical Independence ◽  
Mixing Matrix ◽  
Recent Method ◽  
Novel Method ◽  
Source Signals

Independent Component Analysis (ICA) is a recent method of blind source separation, it has been employed in medical image processing and structural damge detection. It can extract source signals and the unmixing matrix of the system using mixture signals only. This novel method relies on the assumption that source signals are statistically independent. This paper looks at various measures of statistical independence (SI) employed in ICA, the measures proposed by Bakirov and his associates, and the effects of levels of SI of source signals on the output of ICA. Firstly, two statistical independent signals in the form of uniform random signals and a mixing matrix were used to simulate mixture signals to be anlysed byfastICApackage, secondly noise was added onto the signals to investigate effects of levels of SI on the output of ICA in the form of soure signals, the mixing and unmixing matrix. It was found that for p-value given by Bakirov’s SI statistical testing of the null hypothesis H0is a good indication of the SI between two variables and that for p-value larger than 0.05, fastICA performs satisfactorily.

SIMPLE NEURON MODELS FOR INDEPENDENT COMPONENT ANALYSIS

1996 ◽  
Vol 07 (06) ◽  
pp. 671-687 ◽  
Author(s):  
AAPO HYVÄRINEN ◽  
ERKKI OJA
Keyword(s):  
Independent Component Analysis ◽  
Negative Feedback ◽  
Single Neuron ◽  
Component Analysis ◽  
Point Of View ◽  
Independent Component ◽  
Neuron Models ◽  
Independent Components ◽  
Unit System ◽  
Learning Rules

Recently, several neural algorithms have been introduced for Independent Component Analysis. Here we approach the problem from the point of view of a single neuron. First, simple Hebbian-like learning rules are introduced for estimating one of the independent components from sphered data. Some of the learning rules can be used to estimate an independent component which has a negative kurtosis, and the others estimate a component of positive kurtosis. Next, a two-unit system is introduced to estimate an independent component of any kurtosis. The results are then generalized to estimate independent components from non-sphered (raw) mixtures. To separate several independent components, a system of several neurons with linear negative feedback is used. The convergence of the learning rules is rigorously proven without any unnecessary hypotheses on the distributions of the independent components.

Application of Fault Diagnosis Method Based on cICA to Gearbox

2014 ◽  
Vol 664 ◽  
pp. 148-152
Author(s):  
Shuang Xi Jing ◽  
Song Tao Guo ◽  
Jun Fa Leng ◽  
Xing Yu Zhao
Keyword(s):  
Fault Diagnosis ◽  
Independent Component Analysis ◽  
Signal To Noise Ratio ◽  
Component Analysis ◽  
Independent Component ◽  
Early Application ◽  
Independent Components ◽  
Gear Fault ◽  
Constrained Independent Component Analysis ◽  
Non Gaussian

Constrained independent component analysis (cICA) is a new theory and new method derived from the independent component analysis (ICA).It can extract the desired independent components (ICs) from the data based on some prior information, thus overcoming the uncertainty of the traditional ICA. Early gearbox fault signals is often very weak ,characterized by non-Gaussian,low signal-to-noise ratio (SNR), which make the existing diagnosis methods in the diagnosis of early application restricted. In this paper,cICA algorithm is applied to gear fault diagnosis. Through the case studies verify the feasibility of this method to extract the desired independent components (ICs), indicating the applicability and effectiveness of the method.

scholarly journals Detection of Indeterminacies in Corrected ECG Signals Using Parameterized Multidimensional Independent Component Analysis

2009 ◽  
Vol 10 (2) ◽  
pp. 85-115 ◽  
Author(s):  
M. P. S. Chawla
Keyword(s):  
Independent Component Analysis ◽  
Component Analysis ◽  
Independent Component ◽  
Complex Signals ◽  
Data Set ◽  
Noise Component ◽  
Ecg Signals ◽  
Independent Components ◽  
Statistical Measures ◽  
Ecg Data

Independent component analysis (ICA) is a new technique suitable for separating independent components from electrocardiogram (ECG) complex signals. The basic idea of using multidimensional independent component analysis (MICA) is to find stable higher dimensional source signal subspaces and to decompose each rotation into elementary rotations within all two-dimensional planes spanned by the coordinate axes useful for diagnostic information of heart. In this paper, ability of ICA for parameterization of ECG signals was felt to reduce the amount of redundant ECG data. This work aims at finding an independent subspace analysis (ISA) model for ECG analysis that allows applicability to any random vectors available in an ECG data set. For the common standards for electrocardiography (CSE) based ECG data sets, joint approximate diagonalization of eigen matrices (Jade) algorithm is used to find smaller subspaces. The extracted independent components are further cleaned by statistical measures. In this study, it is also observed that the value of kurtosis coefficients for the independent components, which represents the noise component, can be further reduced using parameterized multidimensional ICA (PMICA) technique. The indeterminacies if available in the ECG data are to be analysed also using modified version of Jade algorithm to PMICA and parameterized standard ICA (PsICA) for comparative studies. The indeterminacies if available in the ECG data are reduced in PMICA better in comparison to the analysis done using PsICA. The simulation results obtained indicate that ICA definitely improves signal–noise ratio (SNR) like the other higher order digital filtering methods like Kalman, Butterworth etc. with minimum reconstruction errors. Here, it is also confirmed that re-parameterization of the standard ICA model results into a ‘component model’ using MICA technique, which is geometric in spirit and free of indeterminacies existing in sICA model.

scholarly journals Characterization of the seismic dynamical state through joint analysis of earthquakes and seismic noise: the example of Ischia Volcanic Island (Italy)

2020 ◽  
Vol 52 ◽  
pp. 19-28
Author(s):  
Paola Cusano ◽  
Simona Petrosino ◽  
Enza De Lauro ◽  
Salvatore De Martino ◽  
Mariarosaria Falanga
Keyword(s):  
Independent Component Analysis ◽  
Seismic Noise ◽  
Component Analysis ◽  
Structural Features ◽  
Independent Component ◽  
Joint Analysis ◽  
Independent Components ◽  
Ischia Island ◽  
Fluid Solid Interaction

Abstract. This work is devoted to the study of both earthquakes and background seismic noise at Ischia Island (Italy) recorded pre and post the Md 4.0 earthquake occurred on 21 August 2017 (18:57 UTC). We compare and characterize noise and earthquakes in terms of Independent Component Analysis, energy and polarization properties. The earthquakes' waveforms and the background noise are decomposed into a few independent components with two main common signals peaked around 1–2 and 3–4 Hz, respectively. A slight increase of the energy of the background seismic noise is observed comparing samples recorded in 2016 and 2017, whereas no variations are detected in 2017 pre and post the main earthquake. The polarization analysis, performed in the frequency bands individuated by Independent Component Analysis and applied to the background seismic noise, indicates a shallow propagation and the azimuthal pattern is mainly controlled by the local structural features. These results suggest that noise and earthquakes are ascribable to a common phenomenon of fluid-solid interaction in the hydrothermal system of Ischia Island.

Sign in / Sign up

Export Citation Format

Share Document