scholarly journals Assessment of Waste Generation Rate in Teaching Hospitals of Metropolitan City of Pakistan

2020 ◽  
Vol 6 (9) ◽  
pp. 1809-1821
Author(s):  
Samita Arub ◽  
Sajid Rashid Ahmad ◽  
Sana Ashraf ◽  
Zahra Majid ◽  
Sadia Rahat ◽  
...  
Keyword(s):  
Waste Management ◽  
Hospital Staff ◽  
Generation Rate ◽  
Teaching Hospitals ◽  
Waste Generation ◽  
Waste Collection ◽  
Waste Segregation ◽  
Infectious Waste ◽  
Waste Generation Rate ◽  
Collection Practices

Hospital waste management is of vital significance owing to its contagious and hazardous nature as it can produce detrimental effects for both humans and the environment. This work aimed to examine types of waste with respect to waste generation rate in multiple teaching hospitals of metropolitan Lahore. A structured questionnaire survey, site visits, interviews and meetings were conducted in seventeen teaching hospitals. The results have shown that total hospitals average waste, infectious, non-infectious and waste generation rate in Lahore teaching hospitals were 38978 kg/day, 10789 kg/day, 28189 kg/day and 3.7 kg/bed/day, respectively. It is concluded that maximum waste generated in Mayo hospital, Jinnah hospital, Services hospital and Lahore general hospital was 16%, 12%, 12% and 10%, respectively, as per maximum patient’s visits. Positive liner correlation was between number of beds (P=0.917), number of accidents and emergency patients (P=0.75), infectious waste (P=0.998) and (P=1) with total waste. A straight line of linear regression was between (0.9966) infectious waste and (0.9995) general waste with average waste. Although, waste collection practices in these teaching hospitals were observed satisfactory but required training of doctors, nurses and hospital paramedical staff regarding infectious and general waste segregation. It is suggested that hospital staff, waste management and waste collection workers and respective waste management companies should be well trained and aware regarding infectious and non-infectious waste segregation, handling and disposing off procedures.

scholarly journals Face Mask Consumption and Medical Waste Generation During the COVID-19 Pandemic in Iran: Challenges and Problems

2021 ◽  
Vol 7 (3) ◽  
Author(s):  
Hooshyar Hossini ◽  
Sheida Atashkar ◽  
Tooraj Massahi
Keyword(s):  
Waste Management ◽  
Solid Waste ◽  
Consumption Rate ◽  
Face Mask ◽  
Medical Waste ◽  
Generation Rate ◽  
Current Status ◽  
Waste Generation ◽  
Continuous Increase ◽  
Waste Generation Rate

Background: The outbreak of COVID-19 has caused a devastating pandemic scenario in the world. The mortality rate has increased and new socio-economic challenges are emerging. Millions of gloves, gowns, face masks, and face shields are used daily to prevent airborne transmission and facilitate the treatment of COVID-19. Mismanagement of these wastes can lead to increased concerns due to their contamination potential. A comprehensive plan to improve the management of medical wastes in every country requires awareness of the current status of solid waste. As a result, the study aimed to calculate and estimate the consumption rate of face masks and medical waste generation rate during the COVID-19 pandemic in Iran. Also, the performance of different departments of medical waste management and future challenges are discussed. Methods: The daily consumption of face masks and medical waste generation were calculated based on the population data, the percentage of the urban population, face mask acceptance rate, the number of face masks needed per person per day, total COVID-19 confirmed cases, and medical waste generation rate (kg/bed/day). Results: The consumption of face masks in Iran is estimated at 46576000 pieces per day. Also, the three provinces of Tehran (9,560,000 pieces), Khorasan Razavi (3,825,600 pieces), and Isfahan (3,523,200 pieces) have the highest consumption rate of masks, respectively. Increasing the number of confirmed COVID-19 cases has increased the medical waste generation rate. Until April 3, 2021, more than 1,920,394 cases of COVID-19 have been confirmed in Iran, and calculations show that the medical waste generation rate in Iran is about 7,585.56 tons per day. Conclusions: COVID-19 is a highly infectious and problematic disease. The continuous increase in the number of confirmed COVID-19 cases has increased face mask consumption rate and medical waste generation rate, and as a result, new challenges have emerged in the field of solid waste management. These emerging challenges in managing solid waste during the COVID-19 pandemic necessitate the development of appropriate waste management policies and strategies.

Evaluation of industrial wastes management practices: Case study of the Savojbolagh industrial zone, Iran

2019 ◽  
Vol 38 (1) ◽  
pp. 44-58
Author(s):  
Mahdi Farzadkia ◽  
Sahand Jorfi ◽  
Mashaallah Nikzad ◽  
Shahram Nazari
Keyword(s):  
Waste Management ◽  
Industrial Waste ◽  
Management Practices ◽  
Generation Rate ◽  
Physical Analysis ◽  
Waste Generation ◽  
Industrial Zone ◽  
Per Capita ◽  
Waste Generation Rate ◽  
Waste Management Practices

The main objective of this research was to investigate the waste characteristics and management activities in the Savojbolagh industrial zone, Iran, in order to rank the active industries from environmental perspectives using an innovative index. First, the industrial categories with over 50 employees were identified and classified according to their production process. Then, 54 industries were selected and all industrial processes, the types and quantities of products, per capita industrial waste generation, physical analysis and management activities in terms of minimisation, storage, processing, recycling and disposal were evaluated. The required data were obtained through questioners, interviews and field observations. A scoring system was prepared for evaluation of environmental status of waste management practices. Results indicated that the total industrial waste generation rate was 67,258 kg d-1, in which 4528 belonged to hazardous waste. Furthermore, the per capita waste generation rate was 5.51 kg d-1. Plastic, paper and cardboard and metals constituted the most fractions of wastes, respectively. Food and beverage, metallic and chemical/plastic industries were the biggest waste generators. Metallic industries with total score of 502.5 and non-metalic-mineral industries with the total score of 114 were categorised as the best and worst industries in terms of waste management practices.

scholarly journals A Study on Small Clinics Waste Management Practice, Rules, Staff Knowledge, and Motivating Factor in a Rapidly Urbanizing Area

2019 ◽  
Vol 16 (20) ◽  
pp. 4044
Author(s):  
Bilal Ahmed Khan ◽  
Aves Ahmed Khan ◽  
Haris Ahmed ◽  
Shazia Shaheen Shaikh ◽  
Zhaiming Peng ◽  
...  
Keyword(s):  
Factor Analysis ◽  
Waste Management ◽  
Hazardous Waste ◽  
Management Practice ◽  
Generation Rate ◽  
Waste Generation ◽  
Level Of Knowledge ◽  
Waste Generation Rate ◽  
Motivating Factor ◽  
Waste Management Practice

Thousands of small clinics in Pakistan are generating dispersed medical waste, unlike large hospitals, small clinic waste management is often ignored. This study was conducted on 135 small clinics in Hyderabad, Pakistan, with the aim to determine small clinics’ waste management practices in contrast to rules, level of knowledge, the environmental impact of disposal methods, and motivating factor analysis to understand the current situation from multiple perspectives. Overall, the waste generation rate was calculated to be 2.01 kg/clinic/day and the hazardous waste generation rate was 0.89 kg/clinic/day, whereas the general waste generation rate was 1.12 kg/clinic/day. The hazardous waste generation rate percentage is found to be higher than those found in large hospitals by 20%. The waste management practice among surveyed clinics was deplorable; none of the clinics were completely following hospital waste management rules of 2005 and thus the absence of proper segregation, storage, transportation, and disposal was commonly encountered during the study. Clinic staff possessed low level of knowledge and awareness, and acquired no training about waste management practice and rules, moreover, frequent employee turnover was noticed too. Additionally, two hypotheses were checked for creditability of motivating factors with an exploratory factor analysis to check their contribution to motivating clinic staff to practice sound healthcare waste management. Out of 10 indicators, nine were found in support of the hypotheses. Hence, it was discovered that active government involvement and financial support in providing training and inspecting small clinics could help in improving the condition. The findings of the present study can play a vital role in documenting evidence, and for policymakers and governments to plan solid waste management of small clinics and other healthcare facilities.

Solid Waste Management in Lae City, Papua New Guinea

2021 ◽  
Vol 47 (2) ◽  
pp. 371-382
Author(s):  
Revanuru Subramanyam
Keyword(s):  
Waste Management ◽  
Solid Waste ◽  
Papua New Guinea ◽  
Solid Waste Management ◽  
New Guinea ◽  
Generation Rate ◽  
Waste Generation ◽  
Per Capita ◽  
Waste Generation Rate ◽  
The City

Lae city is the capital of the Morobe Province in Papua New Guinea. It is the main land transport corridor, the country's main industrial hub and largest cargo port. As a result of the urbanization and industrialization process, more people had migrated to Lae city for better opportunities. These activities contributed to the generation of a considerable amount of solid waste that has become a real concern. The present research aims to understand the existing practices of Solid Waste Management, to estimate per capita waste generation rate and composition of waste, to identify the issues and challenges faced in this regard and suggest methods for improvement. All wastes from the city are discarded at the Second Seventh Landfill (SSL) open dump site, located about 10 to 12 kilometers drive away from the city, causing enormous pollution to the surrounding environment. The per capita waste generation rate witnessed was 0.312 kg per capita per day with a composition of 66% organic waste, 22% recyclable, and 12% non-recyclable materials. It was found that ineffective legislation, lack of law enforcement were the challenges faced by the Lae city council. Rehabilitation of SSL or the construction of a new sanitary land fill should be recommended for effective management.

Management of healthcare waste in circumstances of limited resources: a case study in the hospitals of Nablus city, Palestine

2009 ◽  
Vol 27 (4) ◽  
pp. 305-312 ◽  
Author(s):  
Issam A. Al-Khatib ◽  
Yousef S. Al-Qaroot ◽  
Mohammad S. Ali-Shtayeh
Keyword(s):  
Waste Management ◽  
Waste Treatment ◽  
Mean Value ◽  
Medical Waste ◽  
Generation Rate ◽  
Waste Generation ◽  
Healthcare Facilities ◽  
Healthcare Waste ◽  
Healthcare Waste Management ◽  
Waste Generation Rate

The objectives of this study were the assessment of healthcare waste management and the characterization of healthcare waste material generated in the hospitals in Nablus city, Palestine, and furthermore, to estimate the prevalence of hepatitis B among the cleaning personnel working in these hospitals. The medical waste generation rate in kg per bed per day was between 0.59 and 0.93 kg bed— 1 day—1. The waste generation rate in the healthcare facilities of Nablus city hospitals was similar to some other developing countries; however, the percentage of medical wastes in the total waste stream was comparatively high. The density of medical waste at the four hospitals studied ranged between 144.9 and 188.4 kg m— 3 with a mean value of 166.7 kg m—3. The waste segregation and handling practices were very poor. Other alternatives for waste treatment rather than incineration such as a locally made autoclave integrated with a shredder should be evaluated and implemented. The system of healthcare waste management in Nablus city is in need of immediate improvement and attention. Formulating rules and guidelines for medical waste and developing strategies for overcoming the obstacles related to waste management should be considered as an urgent matter.

scholarly journals COMPARISON OF WASTE GENERATION RATE IN DIFFERENT SIZE OF HOTELS (CASE STUDY OF NORTH CYPRUS)

2020 ◽  
Vol 8 (4) ◽  
pp. 701-722
Author(s):  
Soolmaz AZARMI ◽  
Roozbeh VAZIRI ◽  
Mehmet Necati CİZRELİOĞULLARI
Keyword(s):  
Waste Management ◽  
Management Practices ◽  
Negative Impact ◽  
Management Practice ◽  
Generation Rate ◽  
Waste Generation ◽  
High Season ◽  
Waste Generation Rate ◽  
Waste Management Practices

Waste management in hotels has a significant role in reducing the negative impact on the economy and environment. The goal of this study was to discover hotel sector waste (HSW) by quantitative analysis of HSW in different size of hotels. The SPSS software was employed to predict the average HSW generation rate using nationality, type of waste, season, accommodation type, and type of waste management practices as predictors. The results showed that during lean season 2063.4 kg and high season 4160 kg. In the sampled accommodation, also during the lean season, the large hotels waste generation rate was (66.7%), medium hotels (19.4%), and small hotels (13.9%) and in high season HSW generation increase around (45%). From the total amount of waste generated in the sampled accommodation, 36% generated by the kitchen, and in other section, 7% of waste was glass, 8% nylon 4% plastic, 3%bottle, and 5% of wood. Also, 14% of the waste generated was recyclable waste in the sample accommodations. Besides, the result showed that the waste management practice rate in the small hotel is less than another accommodation sample size.                                

scholarly journals Prevalent Practices of Solid Waste Management in the Girls Hostels

2021 ◽  
Author(s):  
Ekta Kapri ◽  
Manju Mehta ◽  
Sudesh Gandhi
Keyword(s):  
Waste Management ◽  
Solid Waste ◽  
Solid Waste Management ◽  
Daily Basis ◽  
Human Beings ◽  
Waste Generation ◽  
Waste Collection ◽  
Waste Generation Rate ◽  
The Individual ◽  
The University

Abstract Waste is generated on daily basis through different activities of human beings, which leads to pollution of the environment, which may have serious implications on the health of the individual. Waste generation is also a big problem in schools and universities. To keep that problem in mind study has been conducted on the campus of CCSHAU, Hisar; with the objective to study the type and volume of waste generated in the girl’s hostels. The study estimated the daily waste generation from girl’s hostels and found waste generation rate was high but the waste collection rate was very low because of the improper ratio between the total number of students and sanitary worker. The waste management system in the university girl’s hostels requires not only an estimation of the solid waste but also an understanding of the students’ habits and behaviour towards managing solid waste.

scholarly journals A Statistical Regression Method for Characterization of Household Solid Waste: A Case Study of Awka Municipality in Nigeria

Recycling ◽  
2019 ◽  
Vol 4 (1) ◽  
pp. 1 ◽  
Author(s):  
Obiora B. Ezeudu ◽  
Chigbogu G. Ozoegwu ◽  
Christian N. Madu
Keyword(s):  
Waste Management ◽  
Solid Waste ◽  
Bulk Density ◽  
Polynomial Regression ◽  
Household Size ◽  
Generation Rate ◽  
Waste Generation ◽  
Volume Rate ◽  
Per Capita ◽  
Waste Generation Rate

This work contributes to waste management from two major perspectives. Firstly, waste generation in a previously not-studied location—Awka municipality—was sampled and characterized. Secondly, the characterization was done with improved accuracy using a new method called zero-intercept first-order polynomial regression. The proposed method arrives at composition values and per capita values through polynomial regression that considers sampled waste generation data and household size as regressors, respectively. There are no constituents when no waste is generated and there is no per capita waste when household size is zero, therefore, zero-intercept was imposed on the proposed linear regression approach. An 820 by 11 data matrix from a ten-day sampling in Awka Municipality was used to illustrate the proposed approach; eighty percent of the data was used for training, while twenty percent was used for testing. The results from the proposed method proved more accurate when compared with traditional averaging techniques. The results established for the study area are equally in consonance with known results for similar Nigerian locations, such as organic (73.2%), plastic (8.0%), and recyclable (20.3%). The calculated specific loose volume, specific compact volume, the loose bulk density, and compact bulk density are 2.0 × 10−3 m3/kg, 9.9 × 10−4 m3/kg, 500.0 kg∙m−3, and 1010.2 kg∙m−3, respectively. The waste generation rate is 416.9 g/capita/day, the organic waste generation rate is 307.1 g/capita/day, the recyclable waste generation rate is 83.0 g/capita/day, paper and textile waste generation rate is 25.2 g/capita/day, loose waste volume rate is 9.02 × 10−1 dm3/capita/day, and compact waste volume rate is 4.51 × 10−1 dm3/capita/day. The solid waste characters were compared among the three income groups of low, middle, and high income earners and the observed trends are literature compliant with city-specific coloration. City-wide estimations were made based on demography, literature, and the established results that would aid waste management planning.

scholarly journals Medical laboratory waste generation rate, management practices, and associated factors in Addis Ababa, Ethiopia

2021 ◽  
Author(s):  
Salem Endris ◽  
Zemenu Tamir Tamir ◽  
Abay Sisay
Keyword(s):  
Waste Management ◽  
Management Practices ◽  
Addis Ababa ◽  
Generation Rate ◽  
Medical Laboratory ◽  
Public Healthcare ◽  
Waste Generation ◽  
Biomedical Waste ◽  
Medical Laboratories ◽  
Waste Generation Rate

Background: Biomedical wastes (BMW) generated from medical laboratories are hazardous and can be deleterious to humans and the environment. Highly infectious types of biomedical wastes are commonly generated at an unacceptably high rate from health laboratories of developing countries with a poor management system like Ethiopia. This study was aimed to evaluate the generation rate of biomedical wastes, management practices, and associated factors among public healthcare medical laboratories in Addis Ababa, Ethiopia. Materials and methods: A Health institution-based cross-sectional study was conducted from July 13 to September 25, 2020, in 6 hospital laboratories and 20 health center laboratories in Addis Ababa, Ethiopia. Data on socio-demographic characteristics, knowledge, and practice of biomedical waste management of the health facilities, Biomedical waste generation rate were collected using data collection tools. Data were managed using SPSS version 20 software. Descriptive statistics, Pearson correlation, linear and logistic regression analysis were computed to identify independent predictors of the dependent variable. An Odds ratio with a 95% confidence interval was used to determine the strength of association. Results: The finding revealed that the mean plus or minus SD of the daily generation rate of biomedical wastes was 4.9 plus or minus 3.13 kg/day per medical laboratory. Nineteen (74.3%) medical laboratories had a proper practice of biomedical waste management which is significantly associated with knowledge of professionals on biomedical waste management policies and guidelines, availability of separate financial sources for biomedical waste management, and training level of professionals. Conclusion: The study showed a high generation of biomedical waste from medical laboratories in public healthcare in Addis Ababa, Ethiopia. Near two-thirds of health facilities had a proper practice of waste segregation, collection, storage, and treatment of biomedical wastes generated from their laboratory. However, there was a poor practice of transportation and disposal. Hence, due attention and practicing as per the current national guidelines of biomedical waste management is recommended.

Medical Waste Management: A Case Study on Rajshahi City Corporation in Bangladesh

2015 ◽  
Vol 6 (1) ◽  
pp. 173-178 ◽  
Author(s):  
MZ Alam ◽  
MS Islam ◽  
MR Islam
Keyword(s):  
Waste Management ◽  
Medical Waste ◽  
Generation Rate ◽  
Waste Generation ◽  
Different Types ◽  
Medical Waste Management ◽  
Waste Generation Rate ◽  
Rajshahi City ◽  
Medical Wastes

The management of medical waste (MW) is of great importance due to its impact on human health and environment. The present practices of improper management of generated medical wastes in different Healthcare Establishment (HCEs) in Rajshahi City Corporation (RCC) is playing a contributing role to create vulnerable condition in spreading out the Diarrhea, Hepatitis and various skin related diseases. The objectives of the study are to identify different types of wastes, its generation rate and assess the existing waste management in various HCEs. The study was carried out in 14 different HCEs that generated much portion of MW of total generated MW in RCC. The methodology of this project was descriptive and consisted of the use of field survey and interviews with the relevant authorities and personnel involved in the management of MW. It was found that the surveyed HCEs generate a total of 1495 kg/day of MW; of which about 1328.6 kg/day (88.87%) are non-infectious and about 166.4 kg/day (11.13%) are infectious. The average waste generation rate for surveyed HCEs is 1.54 kg/bed/day or 0.30 kg/patient/day. It was found from the survey that there is no proper and systematic management of medical wastes. The study reveals that lack of awareness; financial support and willingness are responsible for improper management of MW. So the RCC and HCEs authorities should adopt appropriate policy regarding this issue and provide training program on relevant personnel who are engaged in medical waste management.DOI: http://dx.doi.org/10.3329/jesnr.v6i1.22062 J. Environ. Sci. & Natural Resources, 6(1): 173-178 2013

Sign in / Sign up

Export Citation Format

Share Document