scholarly journals Modeling and Modal Analysis of Sliding Yaw Bearing in the Wind Turbine

2012 ◽  
Author(s):  
Yanping Liu ◽  
Lilong Shang ◽  
Yi Yu
Keyword(s):  
Wind Turbine ◽  
Modal Analysis ◽  
Yaw Bearing

Finite Element Analysis of Large-Size Yaw Bearings with Supporting Structure in Wind Turbine

2014 ◽  
Vol 672-674 ◽  
pp. 1550-1553
Author(s):  
Zhen Guo Shang ◽  
Zhong Chao Ma ◽  
Zhen Sheng Sun
Keyword(s):  
Finite Element ◽  
Wind Turbine ◽  
Point Contact ◽  
Element Model ◽  
Contact Forces ◽  
Element Analysis ◽  
Supporting Structure ◽  
Rolling Elements ◽  
Yaw Bearing ◽  
Compression Springs

A procedure for obtaining the load distribution in a four point contact wind turbine yaw bearing considering the effect of the structure’s elasticity is presented. The inhomogeneous stiffness of the supporting structures creates a variation in the results obtained with a rigid model. A finite element model substituting the rolling elements with nonlinear compression springs has been built to evaluate the effect of the supporting structure elasticity on the contact forces between the rolling elements and the raceways.

Monitoring Changes in the Soil and Foundation Characteristics of an Offshore Wind Turbine Using Automated Operational Modal Analysis

2013 ◽  
Vol 569-570 ◽  
pp. 652-659 ◽  
Author(s):  
Gert de Sitter ◽  
Wout Weitjens ◽  
Mahmoud El-Kafafy ◽  
Christof Devriendt
Keyword(s):  
Wind Turbine ◽  
Modal Analysis ◽  
Continuous Monitoring ◽  
Low Frequency ◽  
Operational Modal Analysis ◽  
Human Interaction ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Support Structure ◽  
Lower Natural Frequency

This paper will show the first results of a long term monitoring campaign on an offshore wind turbine in the Belgian North Sea. It will focus on the vibration levels and resonant frequencies of the fundamental modes of the support structure. These parameters will be crucial to minimize O&M costs and to extend the lifetime of offshore wind turbine structures. For monopile foundations for example, scouring and reduction in foundation integrity over time are especially problematic because they reduce the fundamental structural resonance of the support structure, aligning that resonance frequency more closely to the lower frequencies. Since both the broadband wave energy and the rotating frequency of the turbine are contained in this low frequency band, the lower natural frequency can create resonant behavior increasing fatigue damage. Continuous monitoring of the effect of scour on the dynamics of the wind turbine will help to optimize the maintenance activities on the scour protection system. To allow a proper continuous monitoring during operation, reliable state-of-the-art operational modal analysis techniques should be used and these are presented in this paper. The methods are also automated, so that no human-interaction is required and the system can track the natural frequencies and damping ratios in a reliable manner.

scholarly journals Modal analysis of an iced offshore composite wind turbine blade

2021 ◽  
pp. 0309524X2110116
Author(s):  
Oumnia Lagdani ◽  
Mostapha Tarfaoui ◽  
Mourad Nachtane ◽  
Mourad Trihi ◽  
Houda Laaouidi
Keyword(s):  
Wind Turbine ◽  
Modal Analysis ◽  
Turbine Blade ◽  
Natural Frequencies ◽  
Wind Turbine Blade ◽  
Resonance Phenomenon ◽  
Mode Shapes ◽  
The Finite Element Method ◽  
Numerical Work ◽  
Composite Blades

In the far north, low temperatures and atmospheric icing are a major danger for the safe operation of wind turbines. It can cause several problems in fatigue loads, the balance of the rotor and aerodynamics. With the aim of improving the rigidity of the wind turbine blade, composite materials are currently being used. A numerical work aims to evaluate the effect of ice on composite blades and to determine the most adequate material under icing conditions. Different ice thicknesses are considered in the lower part of the blade. In this paper, modal analysis is performed to obtain the natural frequencies and corresponding mode shapes of the structure. This analysis is elaborated using the finite element method (FEM) computer program through ABAQUS software. The results have laid that the natural frequencies of the blade varied according to the material and thickness of ice and that there is no resonance phenomenon.

scholarly journals Aerodynamics and Modal Analysis for the Combined Vane type Vertical Axis Wind Turbine

2018 ◽  
Vol 7 (4.38) ◽  
pp. 1395 ◽  
Author(s):  
Kadhim H. Suffer ◽  
Yassr Y. Kahtan ◽  
Zuradzman M. Razlan
Keyword(s):  
Wind Turbine ◽  
Modal Analysis ◽  
Natural Frequencies ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Mode Shapes ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Starting Torque

The present global energy economy suggests the use of renewable sources such as solar, wind, and biomass to produce the required power. The vertical axis wind turbine is one of wind power applications. Usually, when the vertical axis wind turbine blades are designed from the airfoil, the starting torque problem begins. The main objective of this research is to numerically simulate the combination of movable vanes of a flat plate with the airfoil in a single blade configuration to solve the starting torque problem. CFD analysis in ANSYS-FLUENT and structural analysis in ANSYS of combined blade vertical axis wind turbine rotor has been undertaken. The first simulation is carried out to investigations the aerodynamic characteristic of the turbine by using the finite volume method. While the second simulation is carried out with finite element method for the modal analysis to find the natural frequencies and the mode shape in order to avoid extreme vibration and turbine failure, the natural frequencies, and their corresponding mode shapes are studied and the results were presented with damping and without damping for four selected cases. The predicted results show that the static pressure drop across the blade increase in the active blade side because of the vanes are fully closed and decrease in the negative side because of the all the vanes are fully open. The combined blade helps to increase turbine rotation and so, thus, the power of the turbine increases. While the modal results show that until the 5th natural frequency the effect of damping can be neglected. The predicted results show agreement with those reported in the literature for VAWT with different blade designs.   

Sign in / Sign up

Export Citation Format

Share Document