scholarly journals Aerodynamics and Modal Analysis for the Combined Vane type Vertical Axis Wind Turbine

2018 ◽  
Vol 7 (4.38) ◽  
pp. 1395 ◽  
Author(s):  
Kadhim H. Suffer ◽  
Yassr Y. Kahtan ◽  
Zuradzman M. Razlan
Keyword(s):  
Wind Turbine ◽  
Modal Analysis ◽  
Natural Frequencies ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Mode Shapes ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Starting Torque

The present global energy economy suggests the use of renewable sources such as solar, wind, and biomass to produce the required power. The vertical axis wind turbine is one of wind power applications. Usually, when the vertical axis wind turbine blades are designed from the airfoil, the starting torque problem begins. The main objective of this research is to numerically simulate the combination of movable vanes of a flat plate with the airfoil in a single blade configuration to solve the starting torque problem. CFD analysis in ANSYS-FLUENT and structural analysis in ANSYS of combined blade vertical axis wind turbine rotor has been undertaken. The first simulation is carried out to investigations the aerodynamic characteristic of the turbine by using the finite volume method. While the second simulation is carried out with finite element method for the modal analysis to find the natural frequencies and the mode shape in order to avoid extreme vibration and turbine failure, the natural frequencies, and their corresponding mode shapes are studied and the results were presented with damping and without damping for four selected cases. The predicted results show that the static pressure drop across the blade increase in the active blade side because of the vanes are fully closed and decrease in the negative side because of the all the vanes are fully open. The combined blade helps to increase turbine rotation and so, thus, the power of the turbine increases. While the modal results show that until the 5th natural frequency the effect of damping can be neglected. The predicted results show agreement with those reported in the literature for VAWT with different blade designs.   

Simulation on Performances of Vertical Axis Wind Turbine

2010 ◽  
Author(s):  
Chien-Chang Chen ◽  
Cheng-Hsiung Kuo
Keyword(s):  
Wind Turbine ◽  
Pitch Angle ◽  
Vertical Axis ◽  
Flow Structures ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Moment Coefficient ◽  
Pressure Distributions ◽  
The Moment ◽  
Starting Torque

This study employs the commercialized computational fluid dynamics software (Ansys/Fluent), with the user’s defined technique, to simulate the unsteady flow structures around the small-size vertical axis wind turbines (VAWT) with three straight blades. This study addresses the effects of the collective variations of the pitch angle (within ± 10°) on the performance of the VAWT system. The results of the transient (acceleration) stage will be employed to evaluate the self-starting ability. While the vertical axis wind turbine (VAWT) reaches a steady rotating stage, the detailed flow structures, the vorticity fields, the pressure distributions around, and the forces on the airfoils at various azimuthal positions will be addressed. For the blades with a negative pitch angle (θ = −10°), has the peak value of the moment coefficient within one revolution is the largest which will provide the largest starting torque to drive the VAWT system more easily. However, in this case, the moment coefficients are negative within some part of the period. This cancels part of the positive moment within one revolution, thus the efficiency is reduced at this pitch angle. For the case with positive pitch angle (θ = 10°), the area under the moment coefficient curve is the smallest and the time elapse of large moment coefficient is relatively short. Thus the efficiency and the starting torque are the lowest among thee pitch angles.

scholarly journals CFD ANALYSIS OF THE AIR FLOW AROUND THE BLADES OF THE VERTICAL AXIS WIND TURBINE

2017 ◽  
Vol 3 (1) ◽  
pp. 1-7
Author(s):  
Muhammed Musab Gavgali ◽  
Zbigniew Czyż ◽  
Jacek Czarnigowski
Keyword(s):  
Wind Turbine ◽  
Three Dimensional ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Rotor Blades ◽  
Cfd Analysis ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Bladed Rotor ◽  
The Individual

The paper presents the results of calculations of flow around the vertical axis wind turbine. Three-dimensional calculations were performed using ANSYS Fluent. They were made at steady-state conditions for a wind speed of 3 m/s for 4 angular settings of the three-bladed rotor. The purpose of the calculations was to determine the values of the aerodynamic forces acting on the individual blades and to present the pressure contours on the surface of turbine rotor blades. The calculations were made for 4 rotor angular settings

Numerical Studies on the Effect of Cambered Airfoil Blades on Self-Starting of Vertical Axis Wind Turbine Part 1: NACA 0012 and NACA 4415

2015 ◽  
Vol 787 ◽  
pp. 250-254 ◽  
Author(s):  
T. Micha Premkumar ◽  
Sivamani Seralathan ◽  
T. Mohan ◽  
N.N.P. Saran Reddy
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Wind Turbine Blades ◽  
Static Pressure Distribution ◽  
Numerical Studies ◽  
Airfoil Blades ◽  
Torque Values ◽  
Naca 0012

This is Part-1 of the two-part paper in considering the effect of cambered airfoil blades on self-starting of vertical axis wind turbine. Part 1 reports the numerical studies on self-starting of vertical axis wind turbine with comparative studies involving NACA 0012 and cambered airfoil NACA 4415. Part 2 of the paper deals with numerical studies of NACA 0018 and cambered air foil NACA 63415. Darrieus type VAWT is attracting many researchers attention for its inherent advantages and its diversified applications. However, a disadvantage is when the rotor is stationary, no net rotational forces arises, even at high-wind speed. The principal advantage of the vertical axis format is their ability to accept wind from any direction without yawing mechanism. However, self-starting capability is the major drawbacks. Moreover, literatures based on computational analysis involving the cambered airfoil are few only. The objective of this present study is to select the suitable airfoil blades on self-starting of VAWT at low-Reynolds number. The numerical studies are carried out to identify self-starting capability of the airfoil using CFD analysis by studying the flow field over the vertical axis wind turbine blades. The commercial CFD code, ANSYS CFX 13.0© was used for the present studies. Initially, the flow over NACA 0012 was simulated and analyzed for different angles of attacks and similarly carried out for NACA 4415. The contours of static pressure distribution and velocity as well as the force and torque were obtained. Even though the lift force for cambered airfoil NACA 4415 is higher, based on the torque values of the above blade profiles, asymmetrical airfoil NACA 0012 is found to be appropriate for self-starring of VAWT.

scholarly journals Modal analysis of an iced offshore composite wind turbine blade

2021 ◽  
pp. 0309524X2110116
Author(s):  
Oumnia Lagdani ◽  
Mostapha Tarfaoui ◽  
Mourad Nachtane ◽  
Mourad Trihi ◽  
Houda Laaouidi
Keyword(s):  
Wind Turbine ◽  
Modal Analysis ◽  
Turbine Blade ◽  
Natural Frequencies ◽  
Wind Turbine Blade ◽  
Resonance Phenomenon ◽  
Mode Shapes ◽  
The Finite Element Method ◽  
Numerical Work ◽  
Composite Blades

In the far north, low temperatures and atmospheric icing are a major danger for the safe operation of wind turbines. It can cause several problems in fatigue loads, the balance of the rotor and aerodynamics. With the aim of improving the rigidity of the wind turbine blade, composite materials are currently being used. A numerical work aims to evaluate the effect of ice on composite blades and to determine the most adequate material under icing conditions. Different ice thicknesses are considered in the lower part of the blade. In this paper, modal analysis is performed to obtain the natural frequencies and corresponding mode shapes of the structure. This analysis is elaborated using the finite element method (FEM) computer program through ABAQUS software. The results have laid that the natural frequencies of the blade varied according to the material and thickness of ice and that there is no resonance phenomenon.

scholarly journals Effect of Pitch Parameters on Aerodynamic Forces of a Straight-Bladed Vertical Axis Wind Turbine with Inclined Pitch Axes

2021 ◽  
Vol 11 (3) ◽  
pp. 1033
Author(s):  
Jia Guo ◽  
Timing Qu ◽  
Liping Lei
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Speed Ratio ◽  
Incline Angle ◽  
Asymmetric Distribution ◽  
Vertical Axis Wind Turbine ◽  
Power Performance ◽  
Aerodynamic Forces ◽  
Ansys Fluent ◽  
Pitch Regulation

Pitch regulation plays a significant role in improving power performance and achieving output control in wind turbines. The present study focuses on a novel, pitch-regulated vertical axis wind turbine (VAWT) with inclined pitch axes. The effect of two pitch parameters (the fold angle and the incline angle) on the instantaneous aerodynamic forces and overall performance of a straight-bladed VAWT under a tip-speed ratio of 4 is investigated using an actuator line model, achieved in ANSYS Fluent software and validated by previous experimental results. The results demonstrate that the fold angle has an apparent influence on the angles of attack and forces of the blades, as well as the power output of the wind turbine. It is helpful to further study the dynamic pitch regulation and adaptable passive pitch regulation of VAWTs. Incline angles away from 90° lead to the asymmetric distribution of aerodynamic forces along the blade span, which results in an expected reduction of loads on the main shaft and the tower of VAWTs.

scholarly journals Numerical Simulation of Aerodynamic Performance of Off-grid Small Vertical Axis Wind Turbine

2018 ◽  
Vol 53 ◽  
pp. 02004
Author(s):  
Qiuyun Mo ◽  
Jiabei Yin ◽  
Lin Chen ◽  
Weihao Liu ◽  
Li Jiang ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Velocity Fields ◽  
Compact Model ◽  
Vertical Axis Wind Turbine ◽  
Wind Turbine Blades ◽  
Rotation Domain ◽  
Rng Turbulence Model

In this paper, a 2D off-grid small compact model of vertical axis wind turbine was established. The sliding grid technology, the RNG turbulence model and the Coupld algorithm was applied to simulate the unsteady value of the model's aerodynamic performance. Through the analysis on the flow field at difference moments, the rules about velocity fields, vortices distributions and the wind turbine's total torque were obtained. The results show that: the speed around wind turbine blades have obvious gradient, and the velocity distribution at different times show large differences in the computional domain. In the rotating domain vorticity is large. With away from the rotation domain, vorticity reduced quickly. In the process of rotating for vertical axis wind turbine, the wind turbine's total torque showed alternating positive and negative changes.

Hybrid Polymer Additive Manufacturing of a Darrieus Type Vertical Axis Wind Turbine Design to Improve Power Generation Efficiency

2016 ◽  
Author(s):  
Sourabh Deshpande ◽  
Nithin Rao ◽  
Nitin Pradhan ◽  
John L. Irwin
Keyword(s):  
Power Generation ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Blade Design ◽  
Vertical Axis Wind Turbine ◽  
Wind Turbine Blades ◽  
3D Printed

Utilizing the advantages of additive manufacturing methods, redesigning, building and testing of an existing integral Savonius / Darrieus “Lenz2 Wing” style vertical axis wind turbine is predicted to improve power generation efficiency. The current wind turbine blades and supports made from aluminum plate and sheet are limiting the power generation due to the overall weight. The new design is predicted to increase power generation when compared to the current design due to the lightweight spiral Darrieus shaped hollow blade made possible by 3D printing, along with an internal Savonius blade made from aluminum sheet and traditional manufacturing techniques. The design constraints include 3D printing the turbine blades in a 0.4 × 0.4 × 0.3 m work envelope while using a Stratasys Fortus 400mc and thus the wind turbine blades are split into multiple parts with dovetail joint features, when bonded together result in a 1.2 m tall working prototype. Appropriate allowance in the mating dovetail joints are considered to facilitate the fit and bonding, as well as angle, size and placement of the dovetail to maximize strength. The spiral shape and Darrieus style cross section of the blade that provides the required lift enabling it to rotate from the static condition are oriented laterally for 3D printing to maximize strength. The bonding of the dovetail joints is carried out effectively using an acetone solution dip. The auxiliary components of the wind turbine which include the center support pole, top and bottom support, and center Savonius blades are manufactured using lightweight aluminum. Design features are included in the 3D printed blade parts so that they can be assembled with the aluminum parts in bolted connections. Analysis of the 3D CAD models show that the hybrid aluminum and hollow 3D printed blade construction provides a 50% cost savings over a 3D printed fully solid blade design while minimizing weight and maximizing the strength where necessary. Analysis of the redesign includes a detailed weight comparison, structural strength and the cost of production. Results include linear static finite element analysis for the strength in dovetail joint bonding and the aluminum to 3D printed connections. Additional data reported are the time frame for the design and manufacturing of the system, budget, and an operational analysis of the wind turbine with concern for safety. Results are analyzed to determine the advantages in utilizing a hybrid additive manufacturing and aluminum construction for producing a more efficient vertical axis wind turbine. Techniques used in the production of this type of wind turbine blade are planned to be utilized in similar applications such as a lightweight hovercraft propeller blade design to be tested in future research projects.

Computational Analysis of Airfoil Merging and its Effect on Performance of Lift Based Vertical Axis Wind Turbine

2016 ◽  
Author(s):  
Akshay Basavaraj
Keyword(s):  
Reynolds Number ◽  
Wind Turbine ◽  
Lift Coefficient ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Vertical Axis Wind Turbine ◽  
Low Wind Speed ◽  
Naca 0012 ◽  
Selection Of

In regions of low wind speed, overcoming the starting torque of a Vertical Axis Wind Turbine (VAWT) becomes a challenge aspect. In order to overcome this adversity, careful selection of airfoils for the turbine blades becomes a priority. This paper tries to address the issue utilizing an approach wherein by observing the effect of merging two airfoils. Two airfoils which are of varying camber and thickness are merged and their aerodynamic characteristics are evaluated using the software XFOIL 6.96. For a variation in angle of attack from 0 to 90°, aerodynamic analysis is done in order to observe the behavior of one quarter of the entire VAWT cycle. An objective function is developed so as to observe the maximum possible torque generated by these airfoils at Reynolds number varying from 15,000–120,000. Due to change in the value of CL observed at Low Reynolds Number using commercial CFD softwares, multiple objective functions are utilized to observe the behavior over a range of Reynolds number. An experimental co-relation between the cut-in velocity and the lift-coefficient of the airfoils is developed in order to predict the cut-in velocity of the interpolated airfoils. The airfoils used for this paper are NACA 0012, NACA 0018, FX 66 S196, Clark Y (smooth), PT 40, SD 7032, A 18, SD 7080, SG 6043 and SG 6040.

Modal Analysis of Wind Turbine Blades Based on ANSYS Modeling

2013 ◽  
Vol 790 ◽  
pp. 655-658
Author(s):  
Chi Chen ◽  
Min Wang ◽  
Long Zou
Keyword(s):  
Wind Turbine ◽  
Modal Analysis ◽  
Detailed Analysis ◽  
Dynamic Characteristics ◽  
Natural Vibration ◽  
Turbine Blades ◽  
Mode Shapes ◽  
Wind Turbine Blades ◽  
Horizontal Axis Wind Turbine ◽  
Basic Parameters

The modal analysis is an approximate method to study the dynamic characteristics of the structure, the modal is the natural vibration characteristics of the structure, each modal has a specific natural frequency, damping ratios and mode shapes. This thesis will take 1.2MW horizontal axis wind turbine blade for example, and use parametric language APDL of ANSYS for directly modeling, then set the basic parameters of the material, mesh and discuss modal analysis, lastly conduct a detailed analysis of the results.

Sign in / Sign up

Export Citation Format

Share Document