scholarly journals The research and development of heat insulation materials with low thermal-conductivity in high temperature

Author(s):  
Yanjun Yu
2006 ◽  
Vol 317-318 ◽  
pp. 501-504 ◽  
Author(s):  
Mineaki Matsumoto ◽  
Norio Yamaguchi ◽  
Hideaki Matsubara

Effect of La2O3 addition on thermal conductivity and high temperature stability of YSZ coating produced by EB-PVD was investigated. La2O3 was selected as an additive because it had a significant effect on suppressing densification of YSZ. The developed coating showed extremely low thermal conductivity as well as high resistance to sintering. Microstructural observation revealed that the coating had fine feather-like subcolumns and nanopores, which contributed to limit thermal transport. These nanostructures were thought to be formed by suppressing densification during deposition.


2017 ◽  
Vol 5 (36) ◽  
pp. 19406-19415 ◽  
Author(s):  
Robin Lefèvre ◽  
David Berthebaud ◽  
Oleg Lebedev ◽  
Olivier Pérez ◽  
Célia Castro ◽  
...  

A new ternary layered compound In2Ge2Te6, belonging to the hexatellurogermanate family has been synthesized from the reaction of appropriate amounts of the pure elements at high temperature in sealed silica tubes.


2019 ◽  
Vol 971 ◽  
pp. 114-118
Author(s):  
Mohammad Hajmohammadian Baghban ◽  
Mohaddeseh Tahanpour Javadabadi

Thermal conductivity is an important material property in the energy design process of the buildings. While cement-based materials are the most consumed materials in construction industry, thermal properties of these materials can play a significant role in energy efficiency of the buildings. Cementitious materials with low thermal conductivity can be desirable for using as a part of heat insulation or for thermal bridge calculations. In this study, hydrophobic aerogel granules were used as aggregate and combination of Portland cement and fly ash was considered as the binder in order to achieve a material with low thermal conductivity. Replacement of 50 vol% hardened cement paste (hcp) by aerogel granules led to about 70% reduction in thermal conductivity of air dried samples (from 0.67 W/mK to 0.20 W/mK). However, this reduction was nearly 50% in moist samples submerged in water for three days (from 0.97 W/mK to 0.50 W/mK) due to replacement of air by water in hcp pores, which can be avoided by using hydrophobic agents. The thermal conductivity can be reduced by increasing water-cement ratio as well as aerogel content. This type of composite can be used as cast concrete or on-site 3D printing of wall elements.


Refractories ◽  
1979 ◽  
Vol 20 (11-12) ◽  
pp. 688-690
Author(s):  
E. Ya. Litovskii ◽  
E. K. Petukhov ◽  
N. A. Puchkelevich ◽  
I. G. Fedina

2020 ◽  
Author(s):  
Zifan Zhao ◽  
Huimin Xiang ◽  
Heng Chen ◽  
Fu-zhi Dai ◽  
Xiaohui Wang ◽  
...  

Abstract The critical requirements for the environmental barrier coating (EBC) materials of silicon-based ceramic matrix composites (CMCs) including good tolerance to harsh environments, thermal expansion match with the interlayer mullite, good high-temperature phase stability and low thermal conductivity. Cuspidine-structured rare-earth aluminates RE4Al2O9 have been considered as candidates of EBCs for their superior mechanical and thermal properties, but the phase transition at high temperatures is a notable drawback of these materials. To suppress the phase transition and improve the phase stability, a novel cuspidine-structured rare-earth aluminate solid solution (Nd0.2Sm0.2Eu0.2Y0.2Yb0.2)4Al2O9 was designed and successfully synthesized inspired by entropy stabilization effect of high entropy ceramics. The as-synthesized (Nd0.2Sm0.2Eu0.2Y0.2Yb0.2)4Al2O9 exhibits close thermal expansion coefficient (6.96×10-6 /K at 300-1473 K) to that of mullite, good phase stability from 300 K to 1473 K, and low thermal conductivity (1.50 W·m-1·K-1 at room temperature). In addition, strong anisotropic thermal expansion has been observed compared to Y4Al2O9 and Yb4Al2O9. The mechanism for low thermal conductivity is attributed to the lattice distortion and mass difference of the constituent atoms while the anisotropic thermal expansion is due to the anisotropic chemical bonding enhanced by the large size rare earth cations.


Sign in / Sign up

Export Citation Format

Share Document