La2O3 Doped Y2O3 Stabilized ZrO2 TBC Prepared by EB-PVD

2006 ◽  
Vol 317-318 ◽  
pp. 501-504 ◽  
Author(s):  
Mineaki Matsumoto ◽  
Norio Yamaguchi ◽  
Hideaki Matsubara
Keyword(s):  
Thermal Conductivity ◽  
High Temperature ◽  
High Resistance ◽  
Thermal Transport ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Microstructural Observation ◽  
Low Thermal Conductivity ◽  
Ysz Coating

Effect of La2O3 addition on thermal conductivity and high temperature stability of YSZ coating produced by EB-PVD was investigated. La2O3 was selected as an additive because it had a significant effect on suppressing densification of YSZ. The developed coating showed extremely low thermal conductivity as well as high resistance to sintering. Microstructural observation revealed that the coating had fine feather-like subcolumns and nanopores, which contributed to limit thermal transport. These nanostructures were thought to be formed by suppressing densification during deposition.

Manufacturing parameters influencing fire resistance of geopolymers: A review

2016 ◽  
Vol 233 (4) ◽  
pp. 721-733
Author(s):  
Ikmal Hakem Aziz ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Heah Cheng Yong ◽  
Liew Yun Ming ◽  
Kamarudin Hussin ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
High Temperature ◽  
Thermal Behavior ◽  
High Temperatures ◽  
Fire Resistance ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Technological Parameters ◽  
Manufacturing Parameters

Geopolymers exhibit various unique properties and characteristics, including high compressive strength, high temperature stability, and low thermal conductivity. As a relatively new and perspective material, the behavior of geopolymers subjected to high temperatures is being intensively studied nowadays. This review summarizes the recent achievements in the development of geopolymer-based fire resistance materials. Technological parameters, which influence thermal behavior of geopolymer-based materials, are also discussed. Besides that, recent applications of geopolymers according to their composition are presented.

scholarly journals Thermal Conductivity and Sintering Behavior of Sm2Zr2O7 Ceramics with Y3+ Substitution for Different Lattices

2021 ◽  
Author(s):  
Zhaolu Xue ◽  
Xin Wang ◽  
Mengchuan Shi ◽  
Haiyuan Yu ◽  
Xin Zhang ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
High Temperature ◽  
Solid Phase ◽  
Temperature Stability ◽  
Crystal Phase ◽  
Sintering Behavior ◽  
Thermal Barrier ◽  
High Temperature Stability ◽  
Promising Candidate ◽  
Sintering Method

Abstract Sm2Zr2O7 is one of the most promising candidate materials for ultra-high temperature thermal barrier coatings. In this paper, a series of (Sm1-x1Yx1)2(Zr1-x2Yx2)2O7-x2 ceramics with different lattice sites replaced by Y3+ ions were successfully prepared by the high-temperature solid-phase sintering method. The effect of Y3+ doping on microstructure, phase composition, thermal conductivity and sintering behavior of modified Sm2Zr2O7 ceramics were investigated, respectively. The results showed that (Sm1-x1Yx1)2(Zr1-x2Yx2)2O7-x2 were composed of a single pyrochlore crystal phase within 20% Y3+ ions doping concentration. Compared with pure Sm2Zr2O7, the fracture toughness of each (Sm1-x1Yx1)2(Zr1-x2Yx2)2O7-x2 ceramic was significantly reduced. In terms of reducing the thermal conductivity of Sm2Zr2O7, the substitution of Y3+ ion for Zr4+ was more obvious than the substitution of Y3+ for Sm3+. Thermal conductivity of Sm2(Zr0.9Y0.1)2O6.9 was 1.315 W·m-1·K-1 at 1200 °C, which was the lowest among the studied ceramics.. Sm2(Zr0.9Y0.1)2O6.9 ceramic exhibited a lower grain growth rate at 1400 °C, and still remained a single pyrochlore crystal phase after sintering for 100 h, indicating that Sm2(Zr0.9Y0.1)2O6.9 had good high-temperature stability at 1400 °C.

UNS N06455

Alloy Digest ◽  
1989 ◽  
Vol 38 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Stress Corrosion Cracking ◽  
Temperature Stability ◽  
Heat Treating ◽  
High Ductility ◽  
High Temperature Stability ◽  
Nickel Chromium ◽  
Long Time ◽  
Resistance To Stress

Abstract UNS NO6455 is a nickel-chromium-molybdenum alloy with outstanding high-temperature stability as shown by high ductility and corrosion resistance even after long-time aging in the range 1200-1900 F. The alloy also has excellent resistance to stress-corrosion cracking and to oxidizing atmospheres up to 1900 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-367. Producer or source: Nickel and nickel alloy producers.

UNS R54620

Alloy Digest ◽  
1987 ◽  
Vol 36 (7) ◽  
Keyword(s):  
Titanium Alloy ◽  
High Temperature ◽  
Time Use ◽  
Temperature Stability ◽  
High Strength ◽  
Heat Treating ◽  
High Temperature Stability ◽  
Beta Titanium Alloy ◽  
Beta Titanium ◽  
Long Time

Abstract UNS No. R54620 is an alpha-beta titanium alloy. It has an excellent combination of tensile strength, creep strength, toughness and high-temperature stability that makes it suitable for service to 1050 F. It is recommended for use where high strength is required. It has outstanding advantages for long-time use at temperatures to 800 F. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-86. Producer or source: Titanium alloy mills.

Sign in / Sign up

Export Citation Format

Share Document