scholarly journals Spectrophotometric Determination of Sulfamethoxazole Based on Charge-Transfer Complexation with Sodium Nitroprusside

2017 ◽  
Vol 30 (3) ◽  
pp. 102
Author(s):  
Tariq Y. Mahmoud ◽  
Sarmad B. Dikran ◽  
Alaa K. Mohammed

   A simple, accurate and precise spectrophotometric method has been developed for the analysis of sulfamethoxazole (SMZ) in pure form and pharmaceutical preparation. The method involves a direct charge transfer complexation of sulfamethoxazole (SMZ) with sodium nitroprusside (SNP) in alkaline medium and the presence of hydroxyl amine hydrochloride. Variables affecting the formation of the formed orange colored complex were optimized following two approaches univariate and central composite experimental design (CCD) multivariate. Under optimum recommended conditions, the formed complex exhibits λmax at 512 nm and the method conforms Beer's law for SMZ concentration in the range of 5.0-150.0 (µg.mL-1) with molar absorptivity 1.139×103 L.mol-1.cm-1, and r = 0.9997. Analysis of SMZ pharmaceutical dosages shows a good agreement with the real amounts.

2010 ◽  
Vol 7 (4) ◽  
pp. 1507-1513 ◽  
Author(s):  
V. Annapurna ◽  
G. Jyothi ◽  
V. Nagalakshmi ◽  
B. B. V. Sailaja

Simple, accurate and reproducible UV spectrophotometric methods were established for the assay of pyrilamine maleate (PYRA) based on the formation of oxidative coupling and precipitation, charge transfer complexation products. Method A includes the oxidative coupling reaction of PYRA with 3-methyl-2-benzathiazolinone hydrazone (MBTH) in presence of Ce(IV). The formation of oxidative coupling product with 4-amino phenazone (4-AP) in presence of K3Fe(CN)6is incorporated in method B. Precipitation/charge transfer complex formation of the PYRA with tannic acid (TA)/Metol-Cr(VI) in method C were proposed. The optical characteristics such as Beers law limits, molar absorptivity and Sandell’s sensitivity for the methods (A-C) are given. Regression analysis using the method of least squares was made to evaluate the slope (b), intercept (a) and correlation coefficient (r) and standard error of estimation (Se) for each system. Determination of pyrilamine in bulk form and in pharmaceutical formulations were also incorporated.


2012 ◽  
Vol 2012 ◽  
pp. 1-10
Author(s):  
Kudige N. Prashanth ◽  
Basavaiah Kanakapura ◽  
Madihalli S. Raghu ◽  
Kanakapura B. Vinay

Studies were carried out to use the charge-transfer reactions of sumatriptan (SMT), extracted from neutralized sumatriptan succinate (STS), as n-electron donor with the π-acceptor, 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and σ-acceptor, and iodine (I2). The formation of the colored complexes was utilized for the development of simple, rapid, and accurate spectrophotometric methods for the determination of SMT in pure form as well as in its tablets. The quantification of colored products was made spectrophotometrically at 585 nm for the CT complex formed between SMT and DDQ (DDQ method) and at 375 nm for the CT complex formed between SMT and I2 (I2 method). Beer’s law is obeyed over the concentration ranges of 4.0–56.0 μg mL−1 and 2.0–28.0 for DDQ and I2, respectively, with correlation coefficients () of 0.9997 and 0.9998. The analytical parameters such as apparent molar absorptivity, Sandell’s sensitivities, and limits of detection (LOD) and quantification (LOQ) are also reported for both methods. The described methods were successfully applied to the determination of SMT in tablets. No interference was observed from the common excipients present in tablets. The reaction stoichiometry in both methods was evaluated by Job’s method of continuous variations and was found to be 1 : 1 (donor : acceptor).


2011 ◽  
Vol 17 (4) ◽  
pp. 469-476 ◽  
Author(s):  
Madathil Cijo ◽  
Kanakapura Basavaiah ◽  
Sameer Abdulrahman ◽  
K.B. Vinay

Two simple, accurate, precise, inexpensive, selective and sensitive spectrophotometric methods are described for the determination of repaglinide (RPG) in bulk drug and its tablets. The methods were based on the charge- transfer complex reaction between RPG in acetonitrile with p-chloranilic acid (CAA) or 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) in dioxane and subsequent formation of intensely colored radical anions of the reagents which were measured at 520 nm (CAA) or 590 nm (DDQ). Several experimental variables affecting the complex formation, stability of the colored species and sensitivity of the reaction were optimized. Under the optimized conditions, Beer?s law was obeyed over the concentration ranges of 20-400 and 5-80 ?g ml-1 RPG for CAA and DDQ methods, respectively, and the corresponding correlation coefficients were 0.9995 and 0.9998. The apparent molar absorptivity values were 1.02x103 and 4.60x103 for CAA and DDQ methods respectively, with corresponding Sandell sensitivity values of 0.4438 and 0.0984 ?g cm-2. Limits of detection (LOD) were calculated to be 7.07 and 2.42 ?g ml-1 and the limits of quantification (LOQ) were 21.43 and 7.33 ?g ml-1 RPG, for CAA method and DDQ method, respectively. Validation results demonstrated that the inter day and intra day accuracy were up to 97.56%. The precision determined did not exceed 2.5% of RSD. The methods were successfully used for the determination of RPG in tablet form and the results were in good agreement with the label claims as shown by the recoveries which were in the range of 99.22- 102.8% with standard deviation values < 2%. The accuracy of the method was confirmed by recovery studies via standardaddition procedure with excellent recovery 98.24-104.0 ? 1.08-3.35.


2013 ◽  
Vol 2013 ◽  
pp. 1-6
Author(s):  
Hemavathi Nagaraju Deepakumari ◽  
Hosakere Doddarevanna Revanasiddappa

The aim of study was to develop and validate two simple, sensitive, and extraction-free spectrophotometric methods for the estimation of risperidone in both pure and pharmaceutical preparations. They are based on the charge transfer complexation reactions between risperidone (RSP) as n-electron donor and p-chloranilic acid (p-CA) in method A and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) in method B as π-acceptors. In method A, RSP reacts with p-CA in methanol to produce a bright pink-colored chromogen measured at 530 nm whereas, in method B, RSP reacts with DDQ in dichloromethane to form orange-colored complex with a maximum absorption at 460 nm. Beer's law was obeyed in the concentration range of 0–25 and 0–50 μg/mL with molar absorptivity of and L/moL/cm for RSP in methods A and B, respectively. The effects of variables such as reagents, time, and stability of the charge transfer complexes were investigated to optimize the procedures. The proposed methods have been successfully applied to the determination of RSP in pharmaceutical formulations. Results indicate that the methods are accurate, precise, and reproducible (relative standard deviation %).


Author(s):  
RUAA MUAYAD MAHMOOD ◽  
HAMSA MUNAM YASSEN ◽  
SAMAR , NAJWA ISSAC ABDULLA AHMED DARWEESH ◽  
NAJWA ISSAC ABDULLA

Simple, rapid and sensitive extractive spectrophotometric method is presented for the determination of glibenclamide (Glb) based on the formation of ion-pair complex between the Glb and anionic dye, methyl orange (MO) at pH 4. The yellow colored complex formed was quantitatively extracted into dichloromethane and measured at 426 nm. The colored product obeyed Beer’s law in the concentration range of (0.5-40) μg.ml-1. The value of molar absorptivity obtained from Beer’s data was found to be 31122 L.mol-1.cm-1, Sandell’s sensitivity value was calculated to be 0.0159 μg.cm-2, while the limits of detection (LOD) and quantification (LOQ) were found to be 0.1086 and 0.3292 μg.ml-1, respectively. The stoichiometry of the complex created between the Glb and MO was 1:1 as determined via Job’s method of continuous variation and mole ratio method. The method was successfully applied for the analysis of pharmaceutical formulation.


2007 ◽  
Vol 4 (2) ◽  
pp. 173-179 ◽  
Author(s):  
K. Basavaiah ◽  
U. R. Anil Kumar

A simple spectrophotometric method is proposed for the determination of zidovudine(ZDV) in bulk drug and in pharmaceutical preparations. The method is based on the oxidation of ZDV by a known excess of oxidant N-bromosuccinimide (NBS), in buffer medium of pH 1.5, followed by the estimation of unreacted amount of oxidant with metol and sulphanilic acid. The reacted oxidant corresponds to the amount ZDV. The purple-red reaction product absorbs maximally at 530 nm and Beer’s law is obeyed over a range 5 to 75 μg mL-1. The apparent molar absorptivity is calculated to be 5.1×103L mol-1cm-1, and the corresponding Sandell sensitivity value is 0.052 μg cm-2. The limit of detection and quantification are found to be 0.90 and 2.72, respectively. Intra-day and inter-day precision and accuracy of the developed methods were evaluated as per the current ICH guidelines. The method was successfully applied to the assay of ZDV in tablet/capsule preparations and the results were statistically compared with those of the reference method by applying the Student’s t-test and F-test. No interference was observed from the common tablet/capsule excipients. The accuracy of the method was further ascertained by performing recovery studies via standard-addition method.


2009 ◽  
Vol 6 (3) ◽  
pp. 570-577
Author(s):  
Baghdad Science Journal

Nitroso-R-salt is proposed as a sensitive spectrophotometric reagent for the determination of paracetamol in aqueous solution. The method is based on the reaction of paracetamol with iron(III) and subsequent reaction with nitroso-R-salt to yield a green colored complex with maximum absorption at 720 nm. Optimization of the experimental conditions was described. The calibration graph was linear in the concentration range of 0.1 – 2.0 ?g mL-1 paracetamol with a molar absorptivity of 6.9 × 104 L mol-1 cm-1. The method was successfully applied to the determination of paracetamol in pharmaceutical preparations without any interference from common excipients. The method has been statistically evaluated with British Pharmacopoeia method and no statistical difference between methods was found at the 95% confidence level.


Sign in / Sign up

Export Citation Format

Share Document