Transient free convection heat and mass transfer of Casson nanofluid over a vertical porous plate subjected to magnetic field and thermal radiation

2020 ◽  
Vol 3 (4) ◽  
pp. 35-54 ◽  
Author(s):  
M. G. Sobamowo ◽  

In this present study, the transient magnetohydrodynamics free convection heat and mass transfer of Casson nanofluid past an isothermal vertical flat plate embedded in a porous media under the influence of thermal radiation is studied. The governing systems of nonlinear partial differential equations of the flow, heat and mass transfer processes are solved using implicit finite difference scheme of Crank-Nicolson type. The numerical solutions are used to carry out parametric studies. The temperature as well as the concentration of the fluid increase as the Casson fluid and radiation parameters as well as Prandtl and Schmidt numbers increase. The increase in the Grashof number, radiation, buoyancy ratio and flow medium porosity parameters causes the velocity of the fluid to increase. However, the Casson fluid parameter, buoyancy ratio parameter, the Hartmann (magnetic field parameter), Schmidt and Prandtl numbers decrease as the velocity of the flow increases. The time to reach the steady state concentration, the transient velocity, Nusselt number and the local skin-friction decrease as the buoyancy ratio parameter and Schmidt number increase. Also, the steady-state temperature and velocity decrease as the buoyancy ratio parameter and Schmidt number increase. Also, the local skin friction, Nusselt and Sherwood numbers decrease as the Schmidt number increases. However, the local Nusselt number increases as the buoyancy ratio parameter increases. It was established that near the leading edge of the plate), the local Nusselt number is not affected by both buoyancy ratio parameter and Schmidt number. It could be stated that the present study will enhance the understanding of transient free convection flow problems under the influence of thermal radiation and mass transfer as applied in various engineering processes.

CFD letters ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 64-75
Author(s):  
Shahanaz Parvin ◽  
Siti Suzilliana Putri Mohamed Isa ◽  
Norihan Md. Arifin ◽  
Fadzilah Md Ali

1970 ◽  
Vol 1 (1) ◽  
pp. 18-25 ◽  
Author(s):  
Md Abdul Maleque ◽  
Md Shariful Alam

An analysis of free convection and mass transfer unsteady magnetohydrodynamic flow of an electrically conducting viscous incompressible fluid past an infinite vertical porous plate is presented by taking into account the Dufour and Soret effects. With a goal to attain similarity solutions of the problem posed, similarity equations are derived by introducing a time dependent length scale. The non-linear similarity equations, which are locally similar, are solved numerically using shooting method. Dimensionless velocity, temperature and concentration profiles are displayed graphically for different values of the parameters entering into the problem. Finally, the corresponding local skin-friction, local Nusselt number and local Sherwood number, which are of physical interest are tabulated. Keywords: Magnetodydrodynamic, Free convection, Mass transfer, Dufour and Soret effects.   doi: 10.3329/jname.v1i1.2035 Journal of Naval Architecture and Marine Engineering 1(2004) 18-25


2020 ◽  
Vol 14 (2) ◽  
pp. 150-167
Author(s):  
Obalalu Adebowale Martins ◽  
Kazeem Issa ◽  
Abdulrazaq Abdulraheem ◽  
Ajala Olusegun Adebayo ◽  
Adeosun Adeshina Taofeeq ◽  
...  

In this work, the influence of entropy generation analysis for an electrically conducting Casson fluid flow with convective boundary conditions has been numerically studied. The governing equations are analyzed numerically using weighted residual methods. Subsequently, the residuals were minimized using two different approaches of weighted residual method namely collocation weighted residual method (CWRM) and Galerkin weighted residual method (GWRM) and computed numerically using MATHEMATICAL software. The impacts of governing parameters on Casson flow velocity, temperature profile, local skin friction, and Nusselt number were analysed. The obtained solutions were used to determine the heat transfer irreversibility and bejan number of the model. The results of the computation show that the effect of thermophysical properties such as thermal radiation parameter, suction/injection parameter, magnetic field parameter, radiation parameter, and Eckert number has a significant influence on Skin friction coefficient (Cf) and local Nusselt number (Nu) when compared to the Newtonian fluid. The findings from this study are relevant to advances in viscoelasticity and enhanced oil recovery.


2011 ◽  
Vol 15 (suppl. 2) ◽  
pp. 291-305 ◽  
Author(s):  
Vallampati Prasad ◽  
Buddakkagari Vasu ◽  
Bég Anwar ◽  
Rana Parshad

A numerical solution for the free convective, unsteady, laminar convective heat and mass transfer in a viscoelastic fluid along a semi-infinite vertical plate is presented. The Walters-B liquid model is employed to simulate medical creams and other rheological liquids encountered in biotechnology and chemical engineering. This rheological model introduces supplementary terms into the momentum conservation equation. The dimensionless unsteady, coupled and non-linear partial differential conservation equations for the boundary layer regime are solved by an efficient, accurate and unconditionally stable finite difference scheme of the Crank-Nicolson type. The velocity, temperature and concentration fields have been studied for the effect of Prandtl number (Pr), viscoelasticity parameter (G), Schmidt number (Sc), Buoyancy ration parameter (N). The local skin-friction, Nusselt number and Sherwood number are also presented and analyzed graphically. It is observed that, when the viscoelasticity parameter (G) increases, the velocity increases close to the plate surface. An increase in Schmidt number is observed to significantly decrease both velocity and concentration.


Author(s):  
S. Molli ◽  
K. Naikoti

In this paper, unsteady electrically conducting, incompressible, heat and mass transfer Magnetohydrodynamic free convective fluid flow with Cu-nanoparticles over a vertical plate embedded in a porous medium and variable boundary conditions are considered. The governing PDE's have been converted to non-dimensional equations then solved by FET for velocity, temperature and concentration profiles with the influence of buoyancy force due to heat and mass transfer, Prandtl and Schmidt number , time, magnetic and chemical reaction parameter in case of pure fluid and Cu-water nanofluid. The Cu-water nanofluid velocity is low than pure fluid, these are presented through graphical form . Also presented the local Skin-friction coefficient, rate of heat and mass transfer and code of validation through tabular forms.


Sign in / Sign up

Export Citation Format

Share Document