Axisymmetric and Non-Axisymmetric Vibration of Thin Growing Viscoelastic Disc

2020 ◽  
Vol 55 (5) ◽  
pp. 741-759
Author(s):  
M. Y. Shatalov ◽  
S. V. Joubert ◽  
A. J. Peck
2015 ◽  
Vol 20 (4) ◽  
pp. 939-951
Author(s):  
K.K. Żur

Abstract Free vibration analysis of homogeneous and isotropic annular thin plates by using Green’s functions is considered. The formula of the influence function for uniform thin circular and annular plates is presented in closed-form. The limited independent solutions of differential Euler equation were expanded in the Neumann power series based on properties of integral equations. The analytical frequency equations as power series were obtained using the method of successive approximations. The natural axisymmetric frequencies for singularities when the core radius approaches zero are calculated. The results are compared with selected results presented in the literature.


1990 ◽  
Vol 112 (4) ◽  
pp. 432-437 ◽  
Author(s):  
A. V. Singh ◽  
S. Mirza

Natural frequencies and mode shapes are presented for the free axisymmetric vibration of spherical shells with linearly varying thickness along the meridian. Clamped and hinged edges corresponding to opening angles 30, 45, 60 and 90 deg have been considered in this technical brief to cover a wide range from shallow to deep spherical shells. Variations in thickness are seen to have very pronounced effects on the frequencies and mode shapes.


Author(s):  
Roshan Lal ◽  
Rahul Saini

In this article, the effect of Pasternak foundation on free axisymmetric vibration of functionally graded circular plates subjected to mechanical in-plane force and a nonlinear temperature distribution (NTD) along the thickness direction has been investigated on the basis of classical plate theory. The plate material is graded in thickness direction according to a power-law distribution and its mechanical properties are assumed to be temperature-dependent (TD). At first, the equation for thermo-elastic equilibrium and then equation of motion for such a plate model have been derived by Hamilton's principle. Employing generalized differential quadrature rule (GDQR), the numerical values of thermal displacements and frequencies for clamped and simply supported plates vibrating in the first three modes have been computed. Values of in-plane force parameter for which the plate ceases to vibrate have been reported as critical buckling loads. The effect of temperature difference, material graded index, in-plane force, and foundation parameters on the frequencies has been analyzed. The benchmark results for uniform and linear temperature distributions (LTDs) have been computed. A study for plates made with the material having temperature-independent (TI) mechanical properties has also been performed as a special case. Comparison of results with the published work has been presented.


Sign in / Sign up

Export Citation Format

Share Document