scholarly journals Sequential Extraction Results and Mineralogy of Mine Waste and Stream Sediments Associated With Metal Mines in Vermont, Maine, and New Zealand

Author(s):  
N.M. Piatak ◽  
R.R. Seal ◽  
R.F. Sanzolone ◽  
P.J. Lamothe ◽  
Z.A. Brown ◽  
...  
2016 ◽  
Vol 17 (4) ◽  
pp. 1092-1100 ◽  
Author(s):  
Zacharias Steinmetz ◽  
Kilian G. J. Kenngott ◽  
Mohamed Azeroual ◽  
Ralf B. Schäfer ◽  
Gabriele E. Schaumann

2004 ◽  
Vol 68 (1) ◽  
pp. 15-30 ◽  
Author(s):  
F. Frau ◽  
C. Ardau

AbstractMineralogical-chemical techniques (XRD, SEM/EDX, WDXRF) and a sequential selective extraction procedure were applied to mine-waste materials and stream sediments from the Baccu Locci stream catchment (Sardinia, Italy) affected by serious As contamination as a consequence of past mining. Results indicate that solid-state speciation of As is mainly dominated by the presence of Fe(III) hydroxides (arsenical ferrihydrites with various Fe/As molar ratios) occurring as coatings of silicate grains, in which As is contained as sorbed or co-precipitated species. Scorodite (FeAsO4·2H2O) is common too, whereas arsenopyrite is generally subordinate but, owing to its relatively rapid oxidation, environmentally significant. Moreover, some unidentified arsenates of Ca-Fe or K-Fe were also detected. Arsenic contained in these phases is slowly, but continuously, released in relatively small amounts through three main mechanisms: (1) oxidation of residual arsenopyrite to scorodite; (2) decomposition of scorodite into a hydroxide or oxide of Fe(III); (3) desorption/release from Fe(III) hydroxides. Decomposition of the unidentified arsenates is also probable, e.g. Ca-Fe arsenate → calcite + Fe(III) hydroxide + As release. The flotation tailings are widely scattered and distributed in the middle–lower Baccu Locci stream catchment, and represent the most dangerous As-generating contamination source in the study area.


Minerals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 403 ◽  
Author(s):  
Shinji Matsumoto ◽  
Hirotaka Ishimatsu ◽  
Hideki Shimada ◽  
Takashi Sasaoka ◽  
Ginting Kusuma

Characterization of mine waste rocks and prediction of acid mine drainage (AMD) play an important role in preventing AMD. Although high-tech analytical methods have been highlighted for mineral characterization and quantification, simple testing methods are still practical ways to perform in a field laboratory in mines. Thus, this study applied some simple testing methods to the characterization of mine wastes and AMD prediction in addition to a leaching test and the sequential extraction test with HCl, HF, and HNO3, which have not been applied for these purposes, focusing on the form of sulfur and the neutralization effects of carbonates. The results of the Acid Buffering Characteristic Curve test supported the changing trend of the pH attributing carbonates only during the first 10 leaching cycles in the leaching test. The change in the Net Acid Generating (NAG) pH in the sequential NAG test reflected the solubility of sulfur in the rocks, providing information on the form of sulfur in the rocks and the acid-producing potential over time. Consequently, the sequential NAG test and sequential extraction with the acids in combination with the current standards tests (Acid Base Accounting and NAG tests) provided important information for preventing AMD.


Sign in / Sign up

Export Citation Format

Share Document