CENTRI-CAST GRAY IRON 55

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Gray Iron ◽  
Centrifugally Cast ◽  
Wide Range ◽  
Nominal Tensile Strength ◽  
Cast Gray Iron

Abstract CENTRI-CAST GRAY IRON 55 is a centrifugally cast gray iron with a nominal tensile strength of 55,000 psi. It is produced in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Typical applications are seals, bushings, farm machinery, casings and general machinery uses. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-48. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 30

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Gray Iron ◽  
Centrifugally Cast ◽  
Wide Range ◽  
Nominal Tensile Strength ◽  
Cast Gray Iron

Abstract CENTRI-CAST GRAY IRON 30 is a centrifugally cast gray iron with a nominal tensile strength of 30,000 psi. It is produced in the form of tubing which has a wide range of uses for applications where freedom from pattern cost is an important consideration and where size and shape are of paramount importance. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-46. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 50

Alloy Digest ◽  
1981 ◽  
Vol 30 (8) ◽  
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Machine Tools ◽  
Heat Treating ◽  
Gray Iron ◽  
Centrifugally Cast ◽  
Wide Range ◽  
Nominal Tensile Strength ◽  
Cast Gray Iron

Abstract CENTRI-CAST GRAY IRON 50 is a centrifugally cast gray iron with a nominal tensile strength of 50,000 psi. It is cast in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Among its many applications are farm machinery, seals, bushings, machine tools and general machinery uses. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-51. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 40

Alloy Digest ◽  
1977 ◽  
Vol 26 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Machine Tools ◽  
Heat Treating ◽  
Gray Iron ◽  
Centrifugally Cast ◽  
Wide Range ◽  
Nominal Tensile Strength ◽  
Cast Gray Iron

Abstract CENTRI-CAST GRAY IRON 40 is a centrifugally cast gray iron with a nominal tensile strength of 40,000 psi. It is produced in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Typical applications are automotive equipment, compressors, machine tools and general machinery applications. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-44. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 45

Alloy Digest ◽  
1980 ◽  
Vol 29 (6) ◽  
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Machine Tools ◽  
Heat Treating ◽  
Gray Iron ◽  
Wide Range ◽  
Nominal Tensile Strength ◽  
Cast Gray Iron

Abstract CENTRI-CAST GRAY IRON 45 has a nominal tensile strength of 45,000 psi. It is gray iron cast centrifugally in the form of tubing which has a wide range of uses for applications where freedom form pattern cost is an important consideration and where size and shape are of paramount importance. Its many applications include automotive equipment, farm machinery, bushings and machine tools. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-50. Producer or source: Federal Bronze Products Inc..

DYNA-LOY 41L43

Alloy Digest ◽  
1978 ◽  
Vol 27 (1) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Chemical Composition ◽  
Physical Properties ◽  
Surface Treatment ◽  
Surface Finish ◽  
Heat Treating ◽  
Good Surface ◽  
Wide Range ◽  
Good Surface Finish

Abstract DYNA-LOY 41L43 is a cold-drawn alloy steel developed for those applications that require excellent machinability along with a hardness range of Rockwell C 33 to 55. Its chemical composition permits maximum machinability and good surface finish for the tensile strength range 150,000 to 280,000 psi. It is recommended for a wide range of uses such as gears, bushings and fasteners. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-341. Producer or source: Western Cold Drawn Steel, A Division of Stanadyne.

UHB S7

Alloy Digest ◽  
1979 ◽  
Vol 28 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Shock ◽  
Heat Treating ◽  
High Hardenability ◽  
Wide Range

Abstract UHB-S7 is a tool steel characterized by its high hardenability and excellent impact properties. At Rockwell C 59 it has a compressive strength of over 600,000 psi, a tensile strength of 340,000 psi, and a Charpy (no notch, smooth) impact value of more that 140 foot-pounds. It is suitable for a wide range of tool and die work for both hot-shock and cold-shock applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-350. Producer or source: Uddeholm Aktiebolag.

CARPENTER 15Cr-5Ni

Alloy Digest ◽  
1978 ◽  
Vol 27 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Delta Ferrite ◽  
Excellent Corrosion Resistance ◽  
Wide Range

Abstract CARPENTER 15Cr-5Ni offers high strength and excellent corrosion resistance. Similar to Carpenter Custom 630 (17Cr-4Ni) in composition and properties, Carpenter 15Cr-5Ni is chemically balanced to eliminate all but trace amounts of delta ferrite, thus providing superior transverse toughness and ductility plus a higher degree of forgeability. Its wide range of uses include valve parts, engine parts and aircraft components; it is especially useful where high transverse strength and toughness are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-346. Producer or source: Carpenter.

WIELAND-Z30

Alloy Digest ◽  
2005 ◽  
Vol 54 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Strength ◽  
Metalworking Industry

Abstract Wieland-Z30 has good hot and cold working properties and good strength. The alloy is easily machined and used often in the metalworking industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-735. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

MEEHANITE GF-20

Alloy Digest ◽  
1973 ◽  
Vol 22 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast

Abstract MEEHANITE GF-20 is a gray cast iron designed principally for high machinability and is used where strength is not an important factor. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-39. Producer or source: Meehanite Metal Corporation.

CHASE 14310

Alloy Digest ◽  
1977 ◽  
Vol 26 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Thermal Softening ◽  
High Conductivity ◽  
Wide Range

Abstract CHASE 14310 is a high-conductivity copper with excellent resistance to thermal softening. It is a deoxidized, electronic grade of copper with excellent formability, weldability and plateability. It is available in strip form and has a wide range of applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-341. Producer or source: Chase Brass & Copper Company Inc..

Sign in / Sign up

Export Citation Format

Share Document