DYNA-LOY 41L43

Alloy Digest ◽  
1978 ◽  
Vol 27 (1) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Chemical Composition ◽  
Physical Properties ◽  
Surface Treatment ◽  
Surface Finish ◽  
Heat Treating ◽  
Good Surface ◽  
Wide Range ◽  
Good Surface Finish

Abstract DYNA-LOY 41L43 is a cold-drawn alloy steel developed for those applications that require excellent machinability along with a hardness range of Rockwell C 33 to 55. Its chemical composition permits maximum machinability and good surface finish for the tensile strength range 150,000 to 280,000 psi. It is recommended for a wide range of uses such as gears, bushings and fasteners. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-341. Producer or source: Western Cold Drawn Steel, A Division of Stanadyne.

DYNA-LOY 41L49

Alloy Digest ◽  
1978 ◽  
Vol 27 (2) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Chemical Composition ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Heat Treating ◽  
Good Surface ◽  
Good Surface Finish

Abstract DYNA-LOY 41L49 is a cold-drawn alloy steel recommended for those applications that require a hardness range of Rockwell C 43 to 56 and excellent machinability. Its chemical composition permits maximum machinability and good surface finish for the tensile strength range 175,000 to 300,000 psi. Its many uses include shafts, pipe reamers and special bolts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-342. Producer or source: Western Cold Drawn Steel, A Division of Stanadyne.

CENTRI-CAST GRAY IRON 55

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Gray Iron ◽  
Centrifugally Cast ◽  
Wide Range ◽  
Nominal Tensile Strength ◽  
Cast Gray Iron

Abstract CENTRI-CAST GRAY IRON 55 is a centrifugally cast gray iron with a nominal tensile strength of 55,000 psi. It is produced in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Typical applications are seals, bushings, farm machinery, casings and general machinery uses. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-48. Producer or source: Federal Bronze Products Inc..

BRUSH ALLOY 190

Alloy Digest ◽  
1968 ◽  
Vol 17 (12) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Copper Strip ◽  
Beryllium Copper ◽  
Heat Treated

Abstract Brush Alloy 190 is a mill-heat treated beryllium copper strip with a tensile strength up to 190,000 psi. It eliminates the need of customer heat-treating by providing high properties combined with exceptional formability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-194. Producer or source: Brush Beryllium Company.

SAE 1345

Alloy Digest ◽  
1987 ◽  
Vol 36 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Hand Tools ◽  
Manganese Alloy ◽  
Steel Mills ◽  
Wide Range

Abstract SAE 1345 is a through-hardening, manganese alloy steel with intermediate hardenability. It is most commonly used where good strength is needed but low-to-medium toughness is sufficient. Its wide range of uses in tools and machinery includes hand tools, gears, shafts, bolts and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-425. Producer or source: Alloy steel mills and foundries.

SAE 8642

Alloy Digest ◽  
1981 ◽  
Vol 30 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Strength ◽  
Heat Treating ◽  
Steel Mills ◽  
Wide Range ◽  
Strength And Toughness

Abstract SAE 8642 is a triple-alloy steel that can be hardened by austenitizing and quenching in oil. This steel has moderate hardenability with relative high strength and toughness, especially in the quenched-and-tempered condition. It is used in a wide range of components, parts and tools; examples are bolts, shafts, gears, wrenches, axles and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-382. Producer or source: Alloy steel mills and foundries.

UNS G50461

Alloy Digest ◽  
1985 ◽  
Vol 34 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Good Ductility ◽  
Steel Mills ◽  
Wide Range

Abstract UNS NO. G50461 is a low-chromium alloy steel with boron added to increase its hardenability. This steel has medium hardenability and strength with good ductility. It is used in a wide range of machinery and tool applications where its properties meet the requirements. Another grade (UNS No. H50461) has similar properties but slightly wider ranges in percentages of carbon, manganese and chromium; this is known as the H-grade (Hardenability grade). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-408. Producer or source: Alloy steel mills and foundries.

CENTRI-CAST GRAY IRON 45

Alloy Digest ◽  
1980 ◽  
Vol 29 (6) ◽  
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Machine Tools ◽  
Heat Treating ◽  
Gray Iron ◽  
Wide Range ◽  
Nominal Tensile Strength ◽  
Cast Gray Iron

Abstract CENTRI-CAST GRAY IRON 45 has a nominal tensile strength of 45,000 psi. It is gray iron cast centrifugally in the form of tubing which has a wide range of uses for applications where freedom form pattern cost is an important consideration and where size and shape are of paramount importance. Its many applications include automotive equipment, farm machinery, bushings and machine tools. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-50. Producer or source: Federal Bronze Products Inc..

BRUSH ALLOY 25

Alloy Digest ◽  
1978 ◽  
Vol 27 (6) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Deep Drawing ◽  
Base Alloy ◽  
Heat Treating ◽  
Copper Base ◽  
Copper Base Alloy ◽  
Hardened Condition

Abstract BRUSH Alloy 25 attains the highest strength and hardness of any copper-base alloy. In the age-hardened condition, its tensile strength can exceed 200,000 psi and its Rockwell C hardness can reach 45. Its many applications include springs, deep-drawing parts, current-carrying springs connectors. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-356. Producer or source: Brush Wellman Inc..

HYLITE 20

Alloy Digest ◽  
1966 ◽  
Vol 15 (4) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Titanium Aluminum ◽  
Service Conditions

Abstract HYLITE 20 is a titanium-aluminum-tin alloy with properties of medium tensile strength, good weldability and non-embrittlement under service conditions. It is recommended for aircraft and missile components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-47. Producer or source: Jessop-Saville Ltd, Brightside Works.

AISI 5147

Alloy Digest ◽  
1977 ◽  
Vol 26 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Transportation Equipment ◽  
Steel Mills ◽  
Wide Range

Abstract AISI 5147 is a low-chromium (nominally 1% chromium), intermediate-hardenability alloy steel for medium-duty applications. It is normally hardened by quenching in oil. It has a wide range of applications for transportation equipment, farm implements, tools and industrial machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-334. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document