CARTECH MP35N

Alloy Digest ◽  
2021 ◽  
Vol 70 (3) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Phase Transformation ◽  
Heat Treating ◽  
Unique Combination ◽  
High Tensile Strength ◽  
Excellent Corrosion Resistance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Hardened Condition

Abstract CarTech MP35N is a wrought Co-Ni-Cr-Mo alloy that possesses a unique combination of ultra-high tensile strength (up to 2070 MPa, or 300 ksi), good ductility and toughness, and excellent corrosion resistance. The unique properties of CarTech MP35N are developed through work hardening, phase transformation, and aging. If the alloy is used in the fully work hardened condition, service temperatures up to 400 °C (750 °F) are suggested. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-134. Producer or source: Carpenter Technology Corporation.

CARPENTER CUSTOM 475

Alloy Digest ◽  
2006 ◽  
Vol 55 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Small Diameter ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Technology Corporation ◽  
Peak Aged ◽  
Carpenter Technology Corporation

Abstract Custom 475 stainless is a premium melted, high-strength, martensitic, precipitation-hardenable stainless steel. It provides good corrosion resistance and was designed to achieve a tensile strength up to 2000 MPa (290 ksi), combined with good toughness and ductility when in the H975 condition, peak aged at 525 deg C (975 deg F). Other combinations of strength are possible by applying aging temperatures up to 595 deg C (1100 deg F). The alloy is available in strip, wire, and small diameter bar. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-974. Producer or source: Carpenter Technology Corporation.

HITENSO 162

Alloy Digest ◽  
1981 ◽  
Vol 30 (4) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Electrical Contacts ◽  
Unique Combination ◽  
High Electrical Conductivity ◽  
High Tensile Strength

Abstract HITENSO 162 is a copper-cadmium alloy that offers a unique combination of high tensile strength and high electrical conductivity in wire where ordinarily these properties are incompatible. It also is noted for its malleability and toughness. Among its many uses are heating pads, electric blankets, current-carrying rings and electrical contacts. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-416. Producer or source: Anaconda Industries.

CUSTOM AGE 625 PLUS ALLOY

Alloy Digest ◽  
1988 ◽  
Vol 37 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
General Corrosion ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Hardened Condition

Abstract CUSTOM AGE 625 PLUS Alloy offers exceptional resistance to pitting, crevice, attack, general corrosion and to stress-corrosion cracking in the precipitation-hardened condition. This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-357. Producer or source: Carpenter Technology Corporation.

MICRO-MELT NCORR

Alloy Digest ◽  
2015 ◽  
Vol 64 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Heat Treating ◽  
Powder Metal ◽  
Good Corrosion Resistance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract Micro-Melt signifies powder metallurgy. The alloy is nonmagnetic with excellent tensile strength, ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: SS-1231. Producer or source: Carpenter Technology Corporation.

CARTECH 201 MODIFIED

Alloy Digest ◽  
2020 ◽  
Vol 69 (6) ◽  
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Cold Working ◽  
Nickel Content ◽  
Heat Treating ◽  
General Corrosion ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Lower Nickel

Abstract CarTech 201 Modified is a nitrogen-strengthened, chromium-manganese-nickel, austenitic stainless steel that provides substantially higher yield and tensile strength than CarTech 304, and has general-corrosion resistance between that of CarTech 430 and CarTech 304. Compared with CarTech 201 (UNS S20100), CarTech 201 Modified has a lower nickel content, which results in higher-strength levels after cold working. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1319. Producer or source: Carpenter Technology Corporation.

CARTECH AFA 25 STAINLESS

Alloy Digest ◽  
2015 ◽  
Vol 64 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Creep Strength ◽  
Heat Treating ◽  
Intermetallic Phases ◽  
Unique Combination ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract CarTech AFA 25 stainless has a unique combination of oxidation resistance and creep strength by intermetallic phases. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1211. Producer or source: Carpenter Technology Corporation.

PYROMET M252

Alloy Digest ◽  
1991 ◽  
Vol 40 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract PYROMET alloy M-252 was designed for use in highly stressed parts operating at temperatures up to 1600 F (871 C). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-397. Producer or source: Carpenter Technology Corporation.

PYROTOOL W

Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract PYROTOOL W has been designed to possess high strength and hardness at temperatures up to 1500 F (816 C). Applications include high-temperature tooling, extrusion dies, dummy blocks, rings, holders, forging dies and mandrels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-161. Producer or source: Carpenter Technology Corporation.

HYMU 80

Alloy Digest ◽  
1971 ◽  
Vol 20 (10) ◽  
Keyword(s):  
Magnetic Field ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Initial Permeability ◽  
Nickel Iron ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Low Magnetic Field ◽  
Maximum Permeability

Abstract Carpenter HYMU 80 is an unoriented 80% nickel-iron-molybdenum alloy which offers extremely high initial permeability and maximum permeability with minimum hysteresis loss at low magnetic field strengths. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-5. Producer or source: Carpenter Technology Corporation. Originally published May 1953, revised October 1971.

Ti 6Al-4V ELI

Alloy Digest ◽  
2002 ◽  
Vol 51 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Purity ◽  
Heat Treating ◽  
Bearing Strength ◽  
Technology Corporation ◽  
Good Biocompatibility ◽  
Carpenter Technology Corporation

Abstract Carpenter titanium alloy Ti 6Al-4V ELI is a high-purity (extra-low-interstitial) version of Ti 6Al-4V (see Alloy Digest Ti-60, August 2002). The alloy is alpha plus beta and has good biocompatibility. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-129. Producer or source: Carpenter Technology Corporation.

Sign in / Sign up

Export Citation Format

Share Document