CARPENTER CUSTOM 475

Alloy Digest ◽  
2006 ◽  
Vol 55 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Small Diameter ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Technology Corporation ◽  
Peak Aged ◽  
Carpenter Technology Corporation

Abstract Custom 475 stainless is a premium melted, high-strength, martensitic, precipitation-hardenable stainless steel. It provides good corrosion resistance and was designed to achieve a tensile strength up to 2000 MPa (290 ksi), combined with good toughness and ductility when in the H975 condition, peak aged at 525 deg C (975 deg F). Other combinations of strength are possible by applying aging temperatures up to 595 deg C (1100 deg F). The alloy is available in strip, wire, and small diameter bar. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-974. Producer or source: Carpenter Technology Corporation.

PYROMET 350

Alloy Digest ◽  
1974 ◽  
Vol 23 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Gas Turbine ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract PYROMET 350 is a chromium-nickel-molybdenum stainless steel that can be hardened by transformation to martensite and/or preciptation hardening. It is used for gas turbine components and similar parts where high strength is required at room intermediate temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-296. Producer or source: Carpenter Technology Corporation.

PYROMET 355

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Heat Treated ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Gas Turbine Compressor

Abstract Carpenter Pyromet 355 is a chromium nickel-molybdenum stainless steel which can be heat treated to high strength levels. It is recommended for gas turbine compressor parts where high strength is required at intermediate elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-213. Producer or source: Carpenter Technology Corporation.

MICRO-MELT NCORR

Alloy Digest ◽  
2015 ◽  
Vol 64 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Heat Treating ◽  
Powder Metal ◽  
Good Corrosion Resistance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract Micro-Melt signifies powder metallurgy. The alloy is nonmagnetic with excellent tensile strength, ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: SS-1231. Producer or source: Carpenter Technology Corporation.

CARTECH 201 MODIFIED

Alloy Digest ◽  
2020 ◽  
Vol 69 (6) ◽  
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Cold Working ◽  
Nickel Content ◽  
Heat Treating ◽  
General Corrosion ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Lower Nickel

Abstract CarTech 201 Modified is a nitrogen-strengthened, chromium-manganese-nickel, austenitic stainless steel that provides substantially higher yield and tensile strength than CarTech 304, and has general-corrosion resistance between that of CarTech 430 and CarTech 304. Compared with CarTech 201 (UNS S20100), CarTech 201 Modified has a lower nickel content, which results in higher-strength levels after cold working. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1319. Producer or source: Carpenter Technology Corporation.

PYROTOOL W

Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract PYROTOOL W has been designed to possess high strength and hardness at temperatures up to 1500 F (816 C). Applications include high-temperature tooling, extrusion dies, dummy blocks, rings, holders, forging dies and mandrels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-161. Producer or source: Carpenter Technology Corporation.

CARTECH Ti-3Al-8V-6Cr-4Mo-4Zr (BETA C)

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Minimum Weight ◽  
High Strength ◽  
Heat Treating ◽  
Beta Alloy ◽  
Heat Treated ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Metastable Beta ◽  
Good Workability

Abstract CarTech Ti-3Al-8V-6Cr-4Mo-4Zr, also known as Ti-3-8-6-4-4 and Beta C, is a metastable beta alloy used in the solution heat treated or solution heat treated and aged condition. It is appropriate for applications where very high strength, minimum weight, and corrosion resistance are important. Ti-3Al-8V-6Cr-4Mo-4Zr has gained in popularity among beta alloys because it is easier to melt and process, exhibiting low segregation, good workability, and good heat-treating properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-172. Producer or source: Carpenter Technology Corporation.

CARPENTER STAINLESS TYPE 304LN

Alloy Digest ◽  
2005 ◽  
Vol 54 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
Data Sheet ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract Carpenter Stainless Type 304LN is a common, often used austenitic stainless steel. This data sheet emphasizes its use as rebar. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-916. Producer or source: Carpenter Technology Corporation.

ENDURAMET 316LN

Alloy Digest ◽  
2015 ◽  
Vol 64 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
316L Stainless Steel ◽  
Heat Treating ◽  
Type 316L ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Type 316L Stainless Steel

Abstract EnduraMet 316LN stainless is a nitrogen strengthened version of Type 316L stainless steel. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1219. Producer or source: Carpenter Technology Corporation.

CARTECH 321

Alloy Digest ◽  
2021 ◽  
Vol 70 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract CarTech 321 is a titanium-stabilized chromium-nickel austenitic stainless steel that was developed to provide the performance of an 18-8 austenitic stainless steel with improved intergranular corrosion resistance. Since titanium has a stronger affinity for carbon than chromium, titanium carbide tends to precipitate randomly within the grains instead of forming continuous patterns at the grain boundaries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1338. Producer or source: Carpenter Technology Corporation.

CARTECH 347

Alloy Digest ◽  
2021 ◽  
Vol 70 (9) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Stainless Steels ◽  
Intergranular Corrosion ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Intermittent Heating ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract CarTech 347 is a niobium+tantalum stabilized austenitic stainless steel. Like Type 321 austenitic stainless steel, it has superior intergranular corrosion resistance as compared to typical 18-8 austenitic stainless steels. Since niobium and tantalum have stronger affinity for carbon than chromium, carbides of those elements tend to precipitate randomly within the grains instead of forming continuous patterns at the grain boundaries. CarTech 347 should be considered for applications requiring intermittent heating between 425 and 900 °C (800 and 1650 °F). This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1339. Producer or source: Carpenter Technology Corporation.

Sign in / Sign up

Export Citation Format

Share Document