ANCORSTEEL 737SH

Alloy Digest ◽  
2010 ◽  
Vol 59 (9) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Steel Powder ◽  
Powder Metal ◽  
Hardening Process ◽  
Quenching And Tempering

Abstract Ancorsteel 737SH is water atomized, prealloyed steel powder specifically developed for heat treatment by either the sinter-hardening process or conventional quenching and tempering. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-156. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 721 SH

Alloy Digest ◽  
2010 ◽  
Vol 59 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Steel Powder ◽  
Powder Metal ◽  
Metal Parts ◽  
Powder Production

Abstract Ancorsteel 721 SH is a water atomized, prealloyed steel powder specifically developed for sinter hardenings. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metal parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-155. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 2000

Alloy Digest ◽  
2010 ◽  
Vol 59 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Alloy Powder ◽  
Powder Metal ◽  
Metal Parts ◽  
Powder Production

Abstract Ancorsteel 2000 is a water atomized low-alloy powder metal containing Ni, Mo, and Mn and is useful in powder metal parts requiring greater hardenability. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metallurgy parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-157. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 150 HP

Alloy Digest ◽  
2010 ◽  
Vol 59 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Powder Metal ◽  
Base Powder ◽  
Powder Production ◽  
Wide Range

Abstract Ancorsteel 150 HP is a good base powder for a wide range of hybrid alloy systems. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metallurgy parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-154. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 85 HP

Alloy Digest ◽  
2012 ◽  
Vol 61 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Performance ◽  
Steel Powder ◽  
Low Alloy Steel ◽  
Powder Metal ◽  
Wide Range

Abstract Ancorsteel 85 HP is a water-atomized, prealloyed low-alloy steel powder for high performance applications. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles that are then annealed to produce uniform, dependable steel powders. Ancorsteel 85 HP is a good base powder for a wide range of hybrid alloy systems. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-169. Producer or source: Hoeganaes Corporation.

ANCORSTEEL FLD-49HP

Alloy Digest ◽  
2018 ◽  
Vol 67 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Performance ◽  
High Hardness ◽  
Steel Powder ◽  
Alloyed Powder ◽  
Powder Metal ◽  
Nickel Copper ◽  
Material Standard

Abstract Ancorsteel FLD-49HP is a nickel copper-molybdenum alloy steel powder developed for high-performance sinter-hardening applications. This alloy conforms to MPIF Material standard 35, designation FLDN4C2-4905. The nickel and copper are diffusion-alloyed to the molybdenum pre-alloyed powder during processing to maintain good compressibility while enabling high hardness and toughness in sinter-hardened parts. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: SA-809. Producer or source: Hoeganaes Corporation.

ANCORLOY DH-1

Alloy Digest ◽  
2010 ◽  
Vol 59 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Heat Treating ◽  
Powder Metal ◽  
Powder Production

Abstract Ancorloy DH-1 is a hybrid alloy based on Ancorsteel 150 HP (Alloy Digest CS-154, July 2010) to which 2% w/o copper has been added. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating and powder metal forms. Filing Code: SA-619. Producer or source: Hoeganaes Corporation.

ANCORSTEEL FLD-49DH

Alloy Digest ◽  
2015 ◽  
Vol 64 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Steel Powder ◽  
Molybdenum Alloy ◽  
Powder Metal

Abstract Ancorsteel FLD-49DH is a nickel-free copper-molybdenum alloy steel powder developed for sinter-hardening applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-193. Producer or source: Hoeganaes Corporation.

CARPENTER MICRO-MELT A11

Alloy Digest ◽  
2000 ◽  
Vol 49 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Powder Metal

Abstract Carpenter Micro-Melt A11 is an A11 steel developed by the powder metal process. The tool steel possesses advantages in quenching, response to heat treatment, wear resistance, and toughness. Applications to be considered are punches and dies for blanking and piercing. See revised version, Alloy Digest TS-587, May 2001. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-571. Producer or source: Carpenter.

ANCORSTEEL 50 HP

Alloy Digest ◽  
2010 ◽  
Vol 59 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Physical Properties ◽  
Production Process ◽  
Alloy Steel ◽  
High Performance ◽  
Steel Powder ◽  
Low Alloy Steel ◽  
Powder Metal ◽  
Nickel Copper ◽  
Wide Range

Abstract Ancorsteel 50 HP is a water-atomized, prealloyed low-alloy steel powder for high-performance applications. The prealloyed 0.50 wt.% Mo addition results in high compressibility and provides good response to heat treatment. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles that are then annealed to produce uniform, dependable steel powders. Ancorsteel 50 HP is an ideal base powder for a wide range of nickel-copper and chromium-manganese hybrid alloy systems. This datasheet provides information on composition and physical properties. It also includes information on powder metal forms. Filing Code: CS-153. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 30 HP

Alloy Digest ◽  
2009 ◽  
Vol 58 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Steel Powder ◽  
Heat Treating ◽  
Powder Alloy ◽  
Low Alloy Steel ◽  
Powder Metal

Abstract Ancorsteel 30 HP is a prealloyed low-alloy steel powder alloy with moderate hardenability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating and powder metal forms. Filing Code: CS-151. Producer or source: Hoeganaes Corporation.

Sign in / Sign up

Export Citation Format

Share Document