ANCORSTEEL FLD-49HP

Alloy Digest ◽  
2018 ◽  
Vol 67 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Performance ◽  
High Hardness ◽  
Steel Powder ◽  
Alloyed Powder ◽  
Powder Metal ◽  
Nickel Copper ◽  
Material Standard

Abstract Ancorsteel FLD-49HP is a nickel copper-molybdenum alloy steel powder developed for high-performance sinter-hardening applications. This alloy conforms to MPIF Material standard 35, designation FLDN4C2-4905. The nickel and copper are diffusion-alloyed to the molybdenum pre-alloyed powder during processing to maintain good compressibility while enabling high hardness and toughness in sinter-hardened parts. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: SA-809. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 85 HP

Alloy Digest ◽  
2012 ◽  
Vol 61 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Performance ◽  
Steel Powder ◽  
Low Alloy Steel ◽  
Powder Metal ◽  
Wide Range

Abstract Ancorsteel 85 HP is a water-atomized, prealloyed low-alloy steel powder for high performance applications. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles that are then annealed to produce uniform, dependable steel powders. Ancorsteel 85 HP is a good base powder for a wide range of hybrid alloy systems. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-169. Producer or source: Hoeganaes Corporation.

ANCORSTEEL FD-4600A

Alloy Digest ◽  
2012 ◽  
Vol 61 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Performance ◽  
Heat Treating ◽  
Conventional Sinter ◽  
Powder Metal ◽  
Performance Requirements ◽  
Material Standard

Abstract Ancorsteel FD-4600A alloy is a water atomized alloy using conventional sinter-hardening to meet high performance requirements. It conforms to MPIF Material Standard 35, Material Designations FD-02XX. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating and powder metal forms. Filing Code: SA-657. Producer or source: Hoeganaes Corporation.

ANCORSTEEL FD-4800A

Alloy Digest ◽  
2012 ◽  
Vol 61 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Performance ◽  
Heat Treating ◽  
Conventional Sinter ◽  
Powder Metal ◽  
Performance Requirements ◽  
Material Standard

Abstract Ancorsteel FD-4800A alloy is a water-atomized alloy using conventional sinter hardening to meet high performance requirements. It conforms to MPIF Material Standard 35, Material Designations FD-04XX. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating and powder metal forms. Filing Code: SA-661. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 721 SH

Alloy Digest ◽  
2010 ◽  
Vol 59 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Steel Powder ◽  
Powder Metal ◽  
Metal Parts ◽  
Powder Production

Abstract Ancorsteel 721 SH is a water atomized, prealloyed steel powder specifically developed for sinter hardenings. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metal parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-155. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 737SH

Alloy Digest ◽  
2010 ◽  
Vol 59 (9) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Steel Powder ◽  
Powder Metal ◽  
Hardening Process ◽  
Quenching And Tempering

Abstract Ancorsteel 737SH is water atomized, prealloyed steel powder specifically developed for heat treatment by either the sinter-hardening process or conventional quenching and tempering. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-156. Producer or source: Hoeganaes Corporation.

ANCORSTEEL FLD-49DH

Alloy Digest ◽  
2015 ◽  
Vol 64 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Steel Powder ◽  
Molybdenum Alloy ◽  
Powder Metal

Abstract Ancorsteel FLD-49DH is a nickel-free copper-molybdenum alloy steel powder developed for sinter-hardening applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-193. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 50 HP

Alloy Digest ◽  
2010 ◽  
Vol 59 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Physical Properties ◽  
Production Process ◽  
Alloy Steel ◽  
High Performance ◽  
Steel Powder ◽  
Low Alloy Steel ◽  
Powder Metal ◽  
Nickel Copper ◽  
Wide Range

Abstract Ancorsteel 50 HP is a water-atomized, prealloyed low-alloy steel powder for high-performance applications. The prealloyed 0.50 wt.% Mo addition results in high compressibility and provides good response to heat treatment. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles that are then annealed to produce uniform, dependable steel powders. Ancorsteel 50 HP is an ideal base powder for a wide range of nickel-copper and chromium-manganese hybrid alloy systems. This datasheet provides information on composition and physical properties. It also includes information on powder metal forms. Filing Code: CS-153. Producer or source: Hoeganaes Corporation.

MONEL ALLOY R-405

Alloy Digest ◽  
1963 ◽  
Vol 12 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Nickel Copper

Abstract MONEL alloy R-405 is a machining grade of nickel-copper alloy that combines toughness, strength and corrosion resistance of MONEL alloy 400 with excellent machinability. The alloy is designed especially for use in automatic screw machines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-79. Producer or source: Huntington Alloy Products Division.

ANCORSTEEL 30 HP

Alloy Digest ◽  
2009 ◽  
Vol 58 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Steel Powder ◽  
Heat Treating ◽  
Powder Alloy ◽  
Low Alloy Steel ◽  
Powder Metal

Abstract Ancorsteel 30 HP is a prealloyed low-alloy steel powder alloy with moderate hardenability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating and powder metal forms. Filing Code: CS-151. Producer or source: Hoeganaes Corporation.

CYCLOPS 62

Alloy Digest ◽  
1966 ◽  
Vol 15 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Work ◽  
High Hardness ◽  
Heat Treating ◽  
High Tempering

Abstract Cyclops 62 is an air-hardening tool steel with exceptional resistance to softening when tempering. It is recommended for cold work applications where high hardness after high tempering temperatures is a requirement. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-181. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document