ANCORSTEEL 2000

Alloy Digest ◽  
2010 ◽  
Vol 59 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Alloy Powder ◽  
Powder Metal ◽  
Metal Parts ◽  
Powder Production

Abstract Ancorsteel 2000 is a water atomized low-alloy powder metal containing Ni, Mo, and Mn and is useful in powder metal parts requiring greater hardenability. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metallurgy parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-157. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 721 SH

Alloy Digest ◽  
2010 ◽  
Vol 59 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Steel Powder ◽  
Powder Metal ◽  
Metal Parts ◽  
Powder Production

Abstract Ancorsteel 721 SH is a water atomized, prealloyed steel powder specifically developed for sinter hardenings. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metal parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-155. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 150 HP

Alloy Digest ◽  
2010 ◽  
Vol 59 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Powder Metal ◽  
Base Powder ◽  
Powder Production ◽  
Wide Range

Abstract Ancorsteel 150 HP is a good base powder for a wide range of hybrid alloy systems. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metallurgy parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-154. Producer or source: Hoeganaes Corporation.

ANCORLOY DH-1

Alloy Digest ◽  
2010 ◽  
Vol 59 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Heat Treating ◽  
Powder Metal ◽  
Powder Production

Abstract Ancorloy DH-1 is a hybrid alloy based on Ancorsteel 150 HP (Alloy Digest CS-154, July 2010) to which 2% w/o copper has been added. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating and powder metal forms. Filing Code: SA-619. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 737SH

Alloy Digest ◽  
2010 ◽  
Vol 59 (9) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Steel Powder ◽  
Powder Metal ◽  
Hardening Process ◽  
Quenching And Tempering

Abstract Ancorsteel 737SH is water atomized, prealloyed steel powder specifically developed for heat treatment by either the sinter-hardening process or conventional quenching and tempering. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-156. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 1000

Alloy Digest ◽  
2010 ◽  
Vol 59 (2) ◽  
Keyword(s):  
Compressive Strength ◽  
Physical Properties ◽  
Production Process ◽  
Molten Steel ◽  
Powder Metal ◽  
Powder Production ◽  
Low Levels

Abstract Ancorsteel 1000 is the workhorse of the Ancorsteel series. It has low levels of carbon and oxygen and good compressibility. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles that are then annealed to produce uniform, dependable steel powders. This datasheet provides information on composition, physical properties, and compressive strength. It also includes information on powder metal forms. Filing Code: CS-152. Producer or source: Hoeganaes Corporation.

NJZ BRASCO

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
New Jersey ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Dimensional Change ◽  
Heat Treating ◽  
Powder Metal ◽  
Cobalt Alloy ◽  
Copper Zinc

Abstract NJZ BRASCO is a powder metallurgy copper-zinc-cobalt alloy designed for use in the as-sintered condition. It provides sintered parts with substantially higher strength and hardness than conventional 70 copper/30 zinc brass P/M parts. Also, it undergoes significantly less dimensional change than 70/30 brass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and powder metal forms. Filing Code: Cu-293. Producer or source: New Jersey Zinc Company.

IN-861

Alloy Digest ◽  
1974 ◽  
Vol 23 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Elemental Powder ◽  
Powder Metal ◽  
International Nickel Company ◽  
Metallurgy Steel

Abstract IN-861 is a mixed elemental powder metallurgy steel designed for use in the as-sintered condition. It achieves its good mechanical properties by hardening during normal cooling in most commercial sintering furnaces. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on heat treating, machining, and powder metal forms. Filing Code: SA-308. Producer or source: International Nickel Company Inc..

ANCORSTEEL 85 HP

Alloy Digest ◽  
2012 ◽  
Vol 61 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Performance ◽  
Steel Powder ◽  
Low Alloy Steel ◽  
Powder Metal ◽  
Wide Range

Abstract Ancorsteel 85 HP is a water-atomized, prealloyed low-alloy steel powder for high performance applications. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles that are then annealed to produce uniform, dependable steel powders. Ancorsteel 85 HP is a good base powder for a wide range of hybrid alloy systems. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-169. Producer or source: Hoeganaes Corporation.

ANCORLOY HP-1

Alloy Digest ◽  
2013 ◽  
Vol 62 (4) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Powder Metal ◽  
Powder Metallurgy Material

Abstract Ancorloy HP-1 is a press-ready, engineered binder-treated premixed ferrous powder metallurgy material designed for enhanced as-sintered mechanical properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: SA-676. Producer or source: Hoeganaes Corporation.

AMETEK 820 ALLOY

Alloy Digest ◽  
1999 ◽  
Vol 48 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Powder Metal ◽  
Nickel Chromium ◽  
Chromium Alloys ◽  
Metal Products ◽  
Specialty Metal

Abstract AMETEK 820 alloy is a powder metallurgically produced strip that is used in hardfacing weld wire. The production process, however, can produce other special strip compositions such as the nickel-chromium alloys used as resistance alloys. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on powder metal forms. Filing Code: Ni-549. Producer or source: AMETEK Specialty Metal Products.

Sign in / Sign up

Export Citation Format

Share Document