WIELAND-K65

Alloy Digest ◽  
2001 ◽  
Vol 50 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Integrated Circuits ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Carrier Material ◽  
Good Corrosion Resistance ◽  
The World ◽  
Very High

Abstract Wieland-K65 is an alloy originally developed near 1970 and used as a carrier material for integrated circuits. It is characterized by high conductivity, good corrosion resistance, and very high strength. In 1990, it accounted for nearly 50% of the leadframe volume in the world. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: CU-664. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

SILNIC BRONZE

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Silicon Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Nickel Silicon

Abstract SILNIC BRONZE is a copper-nickel-silicon alloy having high strength, high conductivity and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-90. Producer or source: Chase Brass & Copper Company Inc..

MONEL ALLOY 502

Alloy Digest ◽  
1970 ◽  
Vol 19 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract MONEL alloy 502, a modification of MONEL alloy K-500, provides improved machinability. It maintains high strength up to about 800 F and has good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-157. Producer or source: Huntington Alloy Products Division.

RAFFMETAL EN AB-Al Si7Mg0.6 (EN AB-42200)

Alloy Digest ◽  
2021 ◽  
Vol 70 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Good Corrosion Resistance

Abstract Raffmetal EN AB-Al Si7Mg0.6 (EN AB-42200) is a heat-treatable, Al-Si-Mg casting alloy in ingot form for remelting. It is used extensively for producing sand, permanent mold, and investment castings for applications requiring a combination of excellent casting characteristics, high strength with good elongation, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-483. Producer or source: Raffmetal S.p.A.

ZAPP ERGSTE 1.4035YU

Alloy Digest ◽  
2020 ◽  
Vol 69 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
High Strength ◽  
Heat Treating ◽  
Medium Carbon ◽  
Good Corrosion Resistance ◽  
Corrosive Environments

Abstract Zapp Ergste 1.4035YU is a medium-carbon, 13% chromium, free-cutting martensitic stainless steel that is designed for applications requiring high strength and hardness, along with good corrosion resistance in moderately corrosive environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1323. Producer or source: Zapp AG.

ATI 35N

Alloy Digest ◽  
2021 ◽  
Vol 70 (2) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Heat Treated ◽  
Cold Worked ◽  
Multi Phase ◽  
Very High

Abstract ATI 35N is a wrought, multi-phase Co-Ni-Cr-Mo alloy that can be heat treated to achieve very high strength, while maintaining excellent toughness, ductility, and corrosion resistance. To achieve tensile strength levels of 1795 to 2070 MPa (260 to 300 ksi), the alloy is cold worked and then precipitation hardened. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-133. Producer or source: ATI.

NICROFER 4320Ti

Alloy Digest ◽  
2006 ◽  
Vol 55 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Good Corrosion Resistance

Abstract Nicrofer 4320 Ti is an age-hardening Ni-Fe-Cr alloy with both good corrosion resistance and high strength to 550 deg C (1020 deg F). It is a modification of alloy 825 and is often used in down-hole applications of sour wells. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-634. Producer or source: VDM Technologies Corporation.

PROMET 104AB

Alloy Digest ◽  
1968 ◽  
Vol 17 (6) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Fatigue Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Good Corrosion Resistance

Abstract PROMET 104AB is a polyphase aluminum bronze, offering a combination of high strength, hardness, wear resistance, fatigue strength and good corrosion resistance. It is recommended for gears, bearing races, worm wheels, slides, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-188. Producer or source: American Crucible Products Company.

RODFLEX HIGH-YIELD

Alloy Digest ◽  
1973 ◽  
Vol 22 (10) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Cold Rolling ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Yield ◽  
Corrosion Resistant ◽  
Very High

Abstract RODFLEX HIGH-YIELD is a stainless steel that develops exceptionally high strength levels by cold rolling. Rodflex 270 and Rodflex 290 are two grades with minimum tensile strengths of 270,000 and 290,000 psi, respectively. They provide a corrosion-resistant 300-type stainless alloy at the very high strength levels now being specified for many springs and related applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-289. Producer or source: Teledyne Rodney Metals.

BRUSH CASTING ALLOYS 275C and 275CT

Alloy Digest ◽  
1992 ◽  
Vol 41 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloys ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Fine Grained ◽  
Casting Alloys ◽  
Very High

Abstract BRUSH CASTING ALLOYS 275C AND 275CT are beryllium copper alloys of very high strength with cobalt and silicon as the secondary alloying elements. Use is in the age-hardened temper. Brush casting alloy 275CT is the fine-grained version. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-537. Producer or source: Brush Wellman Inc.. Originally published as Brush Wellman Alloy 275C, 275CT, April 1988, revised December 1992.

COPPER ALLOY No. C82600

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Copper Base ◽  
Good Corrosion Resistance

Abstract Copper Alloy No. C82600 is an age-hardenable copper-base casting alloy. Nominally it contains 2.3% beryllium. It is characterized by high strength, toughness and good corrosion resistance. Typical uses comprise bearings and molds for plastics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-527. Producer or source: Copper alloy foundries.

Sign in / Sign up

Export Citation Format

Share Document