HIPERCO ALLOY 27 HS

Alloy Digest ◽  
1998 ◽  
Vol 47 (8) ◽  
Keyword(s):  
Magnetic Material ◽  
Physical Properties ◽  
Tensile Properties ◽  
Yield Stress ◽  
Heat Treating ◽  
Soft Magnetic Material ◽  
High Yield ◽  
Magnetic Saturation ◽  
Soft Magnetic ◽  
Thrust Bearings

Abstract Hiperco Alloy 27 HS is a soft magnetic material that combines high magnetic saturation with high yield stress. The alloy is a candidate for use in magnetic-thrust bearings, fly wheels, and shafts requiring the above combination. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming and heat treating. Filing Code: FE-118. Producer or source: Carpenter.

HIPERCO 35

Alloy Digest ◽  
1970 ◽  
Vol 19 (1) ◽  
Keyword(s):  
Magnetic Material ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Soft Magnetic Material ◽  
Soft Magnetic ◽  
Iron Cobalt ◽  
Westinghouse Electric Corporation ◽  
Westinghouse Electric

Abstract Hiperco 35 is an iron-cobalt type of soft magnetic material recommended for use in motors, generators, transformers and relays at temperature above 950 F. It yields the highest known saturation value of 24,500 gausses. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Fe-41. Producer or source: Westinghouse Electric Corporation.

NILOMAG 77

Alloy Digest ◽  
1995 ◽  
Vol 44 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Initial Permeability ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
High Level

Abstract NILOMAG ALLOY 77 is a 77 Ni soft magnetic alloy with a high level of initial permeability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating. Filing Code: Ni-488. Producer or source: Inco Alloys International Inc.

MUMETAL

Alloy Digest ◽  
1991 ◽  
Vol 40 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Magnetic Alloy ◽  
High Permeability ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
Very High ◽  
Specialty Metals

Abstract MUMETAL is a very high permeability soft magnetic alloy. (See also Alloy Digest Ni-25, April 1956.) This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating. Filing Code: Ni-398. Producer or source: Spang Specialty Metals.

MAGNIFER 8105, 8105 So

Alloy Digest ◽  
2001 ◽  
Vol 50 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Content ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Magnetic Alloys ◽  
Soft Magnetic Alloys ◽  
Recording Heads ◽  
High Nickel

Abstract Magnifer 8105 and 8105 So are soft magnetic alloys with a high nickel content. Typical applications for 8105 are recording heads, while 8105 So has additional applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-575. Producer or source: Krupp VDM GmbH.

MAGNIFER 36K

Alloy Digest ◽  
1996 ◽  
Vol 45 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Saturation Induction ◽  
Nickel Iron Alloy

Abstract Magnifer 36K is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 ohm mm2/m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-110. Producer or source: VDM Technologies Corporation.

SUPRA 50

Alloy Digest ◽  
2017 ◽  
Vol 66 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy

Abstract SUPRA 50 is a soft magnetic alloy with close to 50% nickel. It typically runs 47.5 Ni; 0.5 Mn, 0.1 Si; and 0.005 C This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: Fe-167. Producer or source: Lamineries Matthey SA.

CARPENTER HYMU 80 ALLOY

Alloy Digest ◽  
1989 ◽  
Vol 38 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Initial Permeability ◽  
Hysteresis Loss ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
Maximum Permeability

Abstract CARPENTER HyMu 80 alloy is an unoriented soft magnetic alloy with extremely high initial permeability as well as maximum permeability with minimum hysteresis loss. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ni-375. Producer or source: Carpenter.

SWISSMETAL SM900R (BOILLAT PS2)

Alloy Digest ◽  
2000 ◽  
Vol 49 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Yield Strength ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
High Yield ◽  
High Yield Strength ◽  
High Mechanical Strength

Abstract Swissmetal alloy SM900R is a free-machining nickel-free copper alloy with high yield strength and high mechanical strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: CU-646. Producer or source: Swissmetal Metalworks Ltd, Plant Boillat.

MAGNIFER 7904

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Coercive Force ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
High Permeability ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Nickel Iron Alloy

Abstract MAGNIFER 7904 is a soft magnetic nickel-iron alloy containing about 5% molybdenum. It offers extremely high permeability, very low coercive force and minimum hysteresis loss. It is used primarily for transformers, tape-wound troids, laminations, shielding and relay parts. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-291. Producer or source: Vereingte Deutsche Metallwerke AG. Originally published September 1983, revised February 1984.

ENDURAMET 2304 STAINLESS

Alloy Digest ◽  
2013 ◽  
Vol 62 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Heat Treating ◽  
High Yield ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract EnduraMet 2304 Stainless is a duplex austenitic/ferritic stainless steel with high yield strengths. This datasheet primarily covers its use as rebar (as-rolled properties), but includes other applications. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1151. Producer or source: Carpenter Technology Corporation.

Sign in / Sign up

Export Citation Format

Share Document